Loopy Pro: Create music, your way.

What is Loopy Pro? — Loopy Pro is a powerful, flexible, and intuitive live looper, sampler, clip launcher and DAW for iPhone and iPad. At its core, it allows you to record and layer sounds in real-time to create complex musical arrangements. But it doesn’t stop there—Loopy Pro offers advanced tools to customize your workflow, build dynamic performance setups, and create a seamless connection between instruments, effects, and external gear.

Use it for live looping, sequencing, arranging, mixing, and much more. Whether you're a live performer, a producer, or just experimenting with sound, Loopy Pro helps you take control of your creative process.

Download on the App Store

Loopy Pro is your all-in-one musical toolkit. Try it for free today.

[15min Trial Mode] Nikaya Synth - Polyphonic Wavetable & FM Synthesizer (Released)

24567

Comments

  • SlushSlush

    I too cannot get the ‘convert image to wavetable’ to work. I don’t use iCloud, I tried to select an image from my library but no luck.

  • cem_olcaycem_olcay

    @Slush said:
    I too cannot get the ‘convert image to wavetable’ to work. I don’t use iCloud, I tried to select an image from my library but no luck.

    Do you get an error message?

  • Michael_R_GrantMichael_R_Grant
    edited May 17

    A couple of things:

    • Please can parameters be mappable in Drambo?
    • Please can we have the option to use the LFO with the filter? I do like the cycling envelope mode, though!
  • dendydendy

    @rs2000 said:
    @dendy Try modulating WT OSC phase instead. That's what most FM synths do anyway, Nikaya quite likely too 😉

    i know but that makes different sound than true fm (cross) modulation - true frequency modulation can go into much more extreme terrirory and thaťs exscrly what inlike :-)

    here compare between phase and frequency mod ..

    https://youtube.com/shorts/dehKILRF6zc?si=fx4HWnMPQhn0bcnt

    brw damn .. every time i go back to Drambo i again realise how amazing app is it :-))

  • SlushSlush
    edited May 17

    @cem_olcay said:

    @Slush said:
    I too cannot get the ‘convert image to wavetable’ to work. I don’t use iCloud, I tried to select an image from my library but no luck.

    Do you get an error message?

    Yes: ‘Error. Failed to save wavetable’.
    I use Apematrix.

  • cem_olcaycem_olcay

    Ok, I released a new build version addressing all the issues and recommendations. This version,

    • Updates the presets manager

      • Adds next/previous buttons to the top lets you navigate through the presets
      • Adds a checkmark next to the last selected preset
      • Let’s you browse and audit the presets without closing the preset manager
      • You can close it by pressing the done button when you done
      • When reopened, remembers the last selected page

    • Let’s you save your image wavetables and user presets to the local documents folder if iCloud is not available

    • Updates the detune range from -/+ 1 semitones to -/+ 12 semitones (-/+ 1 octave)
    • Adds double tap to detune knobs to reset their value
  • jsmonzanijsmonzani

    @cem_olcay said:

    @jsmonzani said:
    I've tried to load various photos as wavetables in AUv3 but got the same error everytime that it can't save the wavetable. Hope it helps!

    Thanks, is the problem on generating the images or saving them to icloud? You might get error if you are not using icloud when saving them.

    Thanks, it was when loading images from local storage, that might be why!

  • MadeofWaxMadeofWax

    This reminds me a bit of the Scythe wave table synth that sadly is no longer on the App Store. I let my iPad delete apps to make room for an update only to realize it was gone forever. I think this looks like a worthy replacement! Too late to join the beta but I’ll definitely be watching for more previews.

  • egobeatsegobeats

    @Poppadocrock said:

    @Halftone said:
    Just home from work & ran through the presets. Some arrows to scroll thru presets rather than opening a menu to select them would be a nice addition. Will play with it more later.

    Agreed. A couple arrows would help scan through patches faster.

    @cem_olcay said:
    Hi all, it's wild that I'm working on this new synth and it's super amazing even I can't believe it how I made it lol :smiley:

    • It's an 8-voice polyphonic wavetable synth with dual wavetable oscillators
    • and 2 FM oscillators (OSC 1 -> 2 & OSC 2 -> 1)
    • with their own envelope generator per-voice.
    • An analog modeled ladder filter with resonance,
    • And a rise & fall filter envelope that has cycling, tempo syncing and retriggering options.
    • ADSR amplitude envelope generator with full graph. (0.1 ms to 5seconds range)
    • Two LFOs for modulating the waveforms of the wavetable OSCs
    • With sin, tri, saw, r-saw and random (sample and hold) shapes & tempo sync and retriggering options
    • Import your own wavetables through iCloud
    • OR Pull up your photo gallery and convert your pictures to wavetables
    • Upload your presets to the community preset pool
    • Or download and use the community presets
    • Lightweight and well optimized, ready for the AUv3 world.

    I'm currently beta testing it and the people loved it so far. If you'd like to try and leave a comment I'd be super happy. It's my first proper synth with my original design and code. I can't believe how good it is, but I'm biased so need to hear your thoughts :smiley:

    Join the beta here (and please please please comment after trying/testing the app)
    https://testflight.apple.com/join/Uy2GCZXf

    https://keybudapp.com/nikaya-manual

    The community presets feature is need to be tested, so please make sure uploading a few presets :smile:

    I'm planning to release on the next week after the bugfixes.

    Cem, proud of you brother. This is awesome

  • distantstardistantstar

    Testflight is full. :(

  • nuno_agogonuno_agogo

    hi, after the current testflight update Nikaya still does not show up in the auv3 list in hosts. rebooting does not help. looks like i am the only one with that issue?

  • HalftoneHalftone

    @nuno_agogo said:
    hi, after the current testflight update Nikaya still does not show up in the auv3 list in hosts. rebooting does not help. looks like i am the only one with that issue?

    Same. iOS 15.2 iPad 9th gen.

  • SquishySquishy

    @nuno_agogo said:
    hi, after the current testflight update Nikaya still does not show up in the auv3 list in hosts. rebooting does not help. looks like i am the only one with that issue?

    It’s shows up in AUM no problem on my iPad Pro. I decided to try it out on my ‘ancient’ iPhone 6s. It does not show up as auv3 in AUM on the phone. (Runs great standalone on the old device tho, bravo!)

  • Edward_AlexanderEdward_Alexander

    @cem_olcay said:
    Ok, I released a new build version addressing all the issues and recommendations.

    Almost all of the recommendations… The filter/envelope controls are still orange. 🧐

  • cem_olcaycem_olcay

    @Edward_Alexander said:

    @cem_olcay said:
    Ok, I released a new build version addressing all the issues and recommendations.

    Almost all of the recommendations… The filter/envelope controls are still orange. 🧐

    lol yeah, I’ll stick with it, they have their own section anyways, I don’t think it will be confusing.

  • rototomrototom

    and how about the parameter exp thing in drambo?;)
    @cem_olcay

  • cem_olcaycem_olcay

    @rototom said:
    and how about the parameter exp thing in drambo?;)
    @cem_olcay

    They are already exposed? I’m not familiar with drambo but here are the AUM and Loopy screenshots.

  • auxmuxauxmux

    Looking good so far. It would be cool if it could be good if a local folder on the iPad can be referenced, similar to how Koala and Patterning allow this for samples. I have thousands of wavetables for use in Drambo, etc.

  • Edward_AlexanderEdward_Alexander

    @cem_olcay said:

    @rototom said:
    and how about the parameter exp thing in drambo?;)
    @cem_olcay

    They are already exposed? I’m not familiar with drambo but here are the AUM and Loopy screenshots.

    I think it’s an issue with Drambo. There’s a few auv3 apps that won’t map. It has been reported to @giku_beepstreet

    It’s not that the parameters aren’t exposed. Yours are exposed just fine.

  • SamuSamu

    @Edward_Alexander said:

    @cem_olcay said:

    @rototom said:
    and how about the parameter exp thing in drambo?;)
    @cem_olcay

    They are already exposed? I’m not familiar with drambo but here are the AUM and Loopy screenshots.

    I think it’s an issue with Drambo. There’s a few auv3 apps that won’t map. It has been reported to @giku_beepstreet

    It’s not that the parameters aren’t exposed. Yours are exposed just fine.

    Anyone care to test AUv3 automation with GRII or LogicPro for iPad? (The beta is full so I can't...).

    At least GRII reports when a plug-in doesn't properly support touch & release events, Logic on the other hand requires them in order to be able to record automation using the plug-in UI.

    I would be interested in testing this if the FM was done between the wave-table oscillators, now it looks more like two separate oscillators are used for FM. Blofeld is one of the few apps that does true wave-table FM, the other one is Butter Synth.

  • cem_olcaycem_olcay
    edited May 18

    @nuno_agogo said:
    hi, after the current testflight update Nikaya still does not show up in the auv3 list in hosts. rebooting does not help. looks like i am the only one with that issue?

    Ok it was my fault, the AUv3 deployment target was left for iOS 17.5+
    It should show up now, I made it iOS 12+ as usual, sorry :smile:
    The new version is up!

  • cem_olcaycem_olcay

    @Samu said:

    @Edward_Alexander said:

    @cem_olcay said:

    @rototom said:
    and how about the parameter exp thing in drambo?;)
    @cem_olcay

    They are already exposed? I’m not familiar with drambo but here are the AUM and Loopy screenshots.

    I think it’s an issue with Drambo. There’s a few auv3 apps that won’t map. It has been reported to @giku_beepstreet

    It’s not that the parameters aren’t exposed. Yours are exposed just fine.

    Anyone care to test AUv3 automation with GRII or LogicPro for iPad? (The beta is full so I can't...).

    At least GRII reports when a plug-in doesn't properly support touch & release events, Logic on the other hand requires them in order to be able to record automation using the plug-in UI.

    I would be interested in testing this if the FM was done between the wave-table oscillators, now it looks more like two separate oscillators are used for FM. Blofeld is one of the few apps that does true wave-table FM, the other one is Butter Synth.

    Yes, I think it's the true wavetable FM, but you can be the judge, sent you an invitation for the beta :smile:
    I don't know about the touch & release events you mentioned, never heard of them tbh, let me look into this.

  • SamuSamu

    @cem_olcay said:

    @Samu said:

    @Edward_Alexander said:

    @cem_olcay said:

    @rototom said:
    and how about the parameter exp thing in drambo?;)
    @cem_olcay

    They are already exposed? I’m not familiar with drambo but here are the AUM and Loopy screenshots.

    I think it’s an issue with Drambo. There’s a few auv3 apps that won’t map. It has been reported to @giku_beepstreet

    It’s not that the parameters aren’t exposed. Yours are exposed just fine.

    Anyone care to test AUv3 automation with GRII or LogicPro for iPad? (The beta is full so I can't...).

    At least GRII reports when a plug-in doesn't properly support touch & release events, Logic on the other hand requires them in order to be able to record automation using the plug-in UI.

    I would be interested in testing this if the FM was done between the wave-table oscillators, now it looks more like two separate oscillators are used for FM. Blofeld is one of the few apps that does true wave-table FM, the other one is Butter Synth.

    Yes, I think it's the true wavetable FM, but you can be the judge, sent you an invitation for the beta :smile:
    I don't know about the touch & release events you mentioned, never heard of them tbh, let me look into this.

    Thanks!

    I’ll go thru the app and send some feedback and some additional info via e-mail when I’m back home…

    Cheers!

  • SquishySquishy

    @cem_olcay said:

    @nuno_agogo said:
    hi, after the current testflight update Nikaya still does not show up in the auv3 list in hosts. rebooting does not help. looks like i am the only one with that issue?

    Ok it was my fault, the AUv3 deployment target was left for iOS 17.5+
    It should show up now, I made it iOS 12+ as usual, sorry :smile:
    The new version is up!

    Yup yup, shows as auv3 in AUM now 👍

  • nuno_agogonuno_agogo

    @cem_olcay said:

    @nuno_agogo said:
    hi, after the current testflight update Nikaya still does not show up in the auv3 list in hosts. rebooting does not help. looks like i am the only one with that issue?

    Ok it was my fault, the AUv3 deployment target was left for iOS 17.5+
    It should show up now, I made it iOS 12+ as usual, sorry :smile:
    The new version is up!

    nice, working now!

  • nuno_agogonuno_agogo
    edited May 18

    @cem_olcay: looks like the wavtable icloud folder does not recognize sub folders, is that right?

    feels like the wavetable browser could also behave like the preset browser - with arrows and last used page memory

    edit: and also with the ability to browse wavetables while testing them with midi input

  • nuno_agogonuno_agogo
    edited May 18

    and how about enabling wave scrubbing also for x and y independently

    one tab scrubbing x/y together
    next tab just x
    another tab just y
    final tab scrubbing off

  • cem_olcaycem_olcay

    @nuno_agogo said:
    @cem_olcay: looks like the wavtable icloud folder does not recognize sub folders, is that right?

    feels like the wavetable browser could also behave like the preset browser - with arrows and last used page memory

    edit: and also with the ability to browse wavetables while testing them with midi input

    It does, if the subdirectory contains the single-cycle wavefiles.

    There are two types of import:

    • single wavetable wav file containing multiple waves, spliced by the sample length you have chosen
    • a directory containing all the single-cycle wav files
      Both inside the iCloud/Nikaya/Wavetables directory.
  • cem_olcaycem_olcay
    edited May 18

    @nuno_agogo said:
    and how about enabling wave scrubbing also for x and y independently

    one tab scrubbing x/y together
    next tab just x
    another tab just y
    final tab scrubbing off

    Nope, overkill :smiley:
    Just use the Wave knobs instead.

  • cem_olcaycem_olcay

    @Squishy said:

    @cem_olcay said:

    @nuno_agogo said:
    hi, after the current testflight update Nikaya still does not show up in the auv3 list in hosts. rebooting does not help. looks like i am the only one with that issue?

    Ok it was my fault, the AUv3 deployment target was left for iOS 17.5+
    It should show up now, I made it iOS 12+ as usual, sorry :smile:
    The new version is up!

    Yup yup, shows as auv3 in AUM now 👍

    Awesome! Thanks for the feedback!

Sign In or Register to comment.

© Vanilla Keystone Theme 2025