Loopy Pro: Create music, your way.

What is Loopy Pro? — Loopy Pro is a powerful, flexible, and intuitive live looper, sampler, clip launcher and DAW for iPhone and iPad. At its core, it allows you to record and layer sounds in real-time to create complex musical arrangements. But it doesn’t stop there—Loopy Pro offers advanced tools to customize your workflow, build dynamic performance setups, and create a seamless connection between instruments, effects, and external gear.

Use it for live looping, sequencing, arranging, mixing, and much more. Whether you're a live performer, a producer, or just experimenting with sound, Loopy Pro helps you take control of your creative process.

Download on the App Store

Loopy Pro is your all-in-one musical toolkit. Try it for free today.

midiSequencer - all IAPs now free (and Quantum discussion)

1…678911

Comments

  • AudiojunkieAudiojunkie

    @StormJH1 said:
    Bought, primarily because I remember Tony talking about the "sequel" to midiSequencer back in 2015 or whenever, and I was always impressed by his support of products. Not sure if I have the sophistication to use it properly, but will certainly give it a go! Congrats on the release.

    My feelings exactly! Hehehe!! Bought, and hope I can get it figured out! :wink:

  • midiSequencermidiSequencer

    So, Midi-Sequencer has the ability to transmit these, but Quantum doesn't?

    No Quantum has the same capability to send, slightly more if you consider you can define a set of 16 NRPNs per sequence. Its the receiving thats new - so you can automate Quantum sequencer parameters using 14 bit values or specific sequences/parts.

  • AudiojunkieAudiojunkie

    @midiSequencer said:

    So, Midi-Sequencer has the ability to transmit these, but Quantum doesn't?

    No Quantum has the same capability to send, slightly more if you consider you can define a set of 16 NRPNs per sequence. Its the receiving thats new - so you can automate Quantum sequencer parameters using 14 bit values or specific sequences/parts.

    OK, gotcha! :smile: Quite advanced! :smile:

  • AudiojunkieAudiojunkie

    Does Quantum have the ability to transpose and play a sequence, based on which midi key you are playing?

  • wellingtonCreswellingtonCres

    how do i prevent sequencer 2 from being reset by sequencer 1?

  • CarnbotCarnbot

    Bought, one thing I hope may come is the ability to use different AB3 lanes for different Quantum sequences is that on the cards? :)

  • midiSequencermidiSequencer

    @Audiojunkie said:
    Does Quantum have the ability to transpose and play a sequence, based on which midi key you are playing?

    As in midi controller in? Yes and there is a new button on the Devices/Input to ignore this transposing.
    It won't transpose if you are recording.

  • midiSequencermidiSequencer

    @wellingtonCres said:
    how do i prevent sequencer 2 from being reset by sequencer 1?

    Thats where complexity comes in - and something I need to write up on.... but lets start with the Setup panel.

    Sync involves resetting sequences back to step 1.
    There are at least three types of sync:
    Master/Slave - so a Master sequence looping will reset Slaves.
    Ableton Link has Phase (bar) & Beat sync, and has two settings (1st is starting a sequence, 2nd is during play).
    You can link parts A->B->C->D or A->D->C->B->A etc or combinations therefore using the third button in the sequence transport section - first is play/pause, 2nd is stop, 3rd is blank (just play selected part) or > (play parts in order) or < (play parts in reverse order) or + (play all parts together).

    If you go into Setup and turn these all to None, you can have independent sequences but will only really be in sync with each other if you start them from the Song play button. I'd start in that mode until you want some synchronisation.

  • ALBALB

    Congrats - it has been a tough slog for you. All the options on this are making my head explode!

  • midiSequencermidiSequencer

    @Carnbot said:
    Bought, one thing I hope may come is the ability to use different AB3 lanes for different Quantum sequences is that on the cards? :)

    not tried, I got AB3 midi working quite awhile ago - will need to look at the documentation to see if that is supported.

  • midiSequencermidiSequencer

    @ALB said:
    Congrats - it has been a tough slog for you. All the options on this are making my head explode!

    thx - its been a years worth of development - parts in particular causing the most complexity. If I'd realised how difficult it was to write the manual for this I would have finished 6 months ago!

  • CarnbotCarnbot

    @midiSequencer said:

    @Carnbot said:
    Bought, one thing I hope may come is the ability to use different AB3 lanes for different Quantum sequences is that on the cards? :)

    not tried, I got AB3 midi working quite awhile ago - will need to look at the documentation to see if that is supported.

    Cool, looks great and i'm looking forward to getting stuck in :)

  • dougdidougdi

    I'm sure it's right in front of me, but I'm looking for a midi channel number out setting for each sequence.

  • yowzayowza

    @dougdi said:
    I'm sure it's right in front of me, but I'm looking for a midi channel number out setting for each sequence.

    Select a sequence so button is green then go up and hit the Ch button which shows midi channel. Double tap Ch button to show midi channels for all visible sequences

  • wellingtonCreswellingtonCres

    midi ch selection can also be done on the back panel of a sequencer, which you can get by clicking the asterisk button on the right... then double tap on “Ch”

  • dougdidougdi

    Hmmm, double tapping not doing anything. I discovered I can change channel per step, which is a great feature, but all my poking around I can't get to a global setting.

  • wellingtonCreswellingtonCres

    try double tapping just to the right of “Ch”

  • yowzayowza

    @dougdi said:
    Hmmm, double tapping not doing anything. I discovered I can change channel per step, which is a great feature, but all my poking around I can't get to a global setting.

    How many sequences do you have? Double tapping works when there are more than one sequencer in the rack.
    You do select midi channel per step so if you want all steps to have the same channel then link the faders with chain link button on top right side and move them to the midi channel of your choice.

  • DaveypooDaveypoo

    @tja said:

    @wellingtonCres said:
    hmm cant seem to enable link in the options

    Yes, it shows an "X"

    Is this something that still has to be added? I'm obviously getting the same

  • yowzayowza

    From my post on the previous page:

    Go to iOS settings app and enable Link there first

  • TrueyorkyTrueyorky

    @midiSequencer said:
    got love Apple, Quantum got rejected because it doesn't produce persistent audio ;) Had this several times before for midiSequencer though....

    I've sent of my reply & resubmitted.

    Good news is Apple are alot quicker at reviewing things now - I thought it would take up to a week, but they did this within 12 hours.

    Shame IOS 11 is so crap though - its killed some important apps for me on my phone (M15, AUM etc although audiobus works well!) - I'm not updating my pro or air 2 yet....

    M15 and AUM working on my Air 2 ios 11.0.2

  • SygmaSygma

    @midiSequencer said:

    @amarok said:
    I've been using midiSequencer almost 2 years, it is one of my favorites; nearly impossible not to get sucked into what you can do with it, it's so musical & I am SO much looking forward to Quantum, waiting patiently... thanks for all your hard work Tony, your apps have brought some wonderful music to life!

    thx - would love to hear what people are doing with it and as an indie dev with a full time job would appreciate some feedback on iTunes or email. MidiSequencer is an accumulation of ideas - Quantum builds on that - for example a new purchaser of midiSequencer suggested the Elektron Analog four method of step mute every fourth loop - so thats on my list of things to add.

    Hi Tony, I just got Quantum and I must say that I am impressed!
    Just a bit disappointed that trig conditions ala Elektron are not available (being able to trigger a step every x cycle)
    But thank you anyway for this release

  • midiSequencermidiSequencer

    Quantum con> @Sygma said:

    Hi Tony, I just got Quantum and I must say that I am impressed!
    Just a bit disappointed that trig conditions ala Elektron are not available (being able to trigger a step every x cycle)
    But thank you anyway for this release

    Tell me what you want....I'm sure I can add it.... Will have a look at the Eleckron manual...

  • SygmaSygma

    @midiSequencer said:
    Quantum con> @Sygma said:

    Hi Tony, I just got Quantum and I must say that I am impressed!
    Just a bit disappointed that trig conditions ala Elektron are not available (being able to trigger a step every x cycle)
    But thank you anyway for this release

    Tell me what you want....I'm sure I can add it.... Will have a look at the Eleckron manual...

    Excellent! I am sure you already have a long list of future features, but trig conditions would be fantastic for me. Indeed you should read Elektron manual as it is quite powerful, but one of the simple trigger conditions is to trigger a step once every x cycles : it is different from probability, because it is giving you more control on the sequence
    Thank you very much to be so responsive

  • SpookyZooSpookyZoo

    @midiSequencer said:
    Just submitted to Apple........ They seem quick at the moment, but thats for updates - this is a new app.....

    @midiSequencer said:
    Quantum con> @Sygma said:

    Hi Tony, I just got Quantum and I must say that I am impressed!
    Just a bit disappointed that trig conditions ala Elektron are not available (being able to trigger a step every x cycle)
    But thank you anyway for this release

    Tell me what you want....I'm sure I can add it.... Will have a look at the Eleckron manual...

    Tony Rocks! :)

  • midiSequencermidiSequencer
    edited October 2017

    @Sygma said:

    @midiSequencer said:
    Quantum con> @Sygma said:

    Hi Tony, I just got Quantum and I must say that I am impressed!
    Just a bit disappointed that trig conditions ala Elektron are not available (being able to trigger a step every x cycle)
    But thank you anyway for this release

    Tell me what you want....I'm sure I can add it.... Will have a look at the Eleckron manual...

    Excellent! I am sure you already have a long list of future features, but trig conditions would be fantastic for me. Indeed you should read Elektron manual as it is quite powerful, but one of the simple trigger conditions is to trigger a step once every x cycles : it is different from probability, because it is giving you more control on the sequence
    Thank you very much to be so responsive

    will add it to my list :) Sounds like it lives as on the Step Options panel as a setting so you can set it per step.
    I already have accent that makes every x step louder (where x is the time signature numerator on the sequence 2nd page), so this is similar logic but on loops not steps. I also keep count of loops for actions.....

  • wimwim

    @Carnbot said:
    Bought, one thing I hope may come is the ability to use different AB3 lanes for different Quantum sequences is that on the cards? :)

    You can do this if you have MidiFlow channels AB3 plug-in. It’s not, strictly speaking, the standard AB3 convention, but works. B)

  • CarnbotCarnbot

    @wim said:

    @Carnbot said:
    Bought, one thing I hope may come is the ability to use different AB3 lanes for different Quantum sequences is that on the cards? :)

    You can do this if you have MidiFlow channels AB3 plug-in. It’s not, strictly speaking, the standard AB3 convention, but works. B)

    oh yes I do, good idea, yeah essentially that's all that AB3 routing is doing anyway :)

  • dougdidougdi

    @wellingtonCres said:
    midi ch selection can also be done on the back panel of a sequencer, which you can get by clicking the asterisk button on the right... then double tap on “Ch”

    Ahhh! That did it , thanks!

  • Aud_iOSAud_iOS

    I’m playing find the differences from midiSequencer- not a bad Friday B)

Sign In or Register to comment.

© Vanilla Keystone Theme 2025