Arturia audiofuse with iOS ?Anyone tried ? Opinions?

hisdudeness

Arturia audiofuse with iOS ?Anyone tried ? Opinions?Was thinking of buying instead of apogee duet ?

Calverhall

Still desperate to know for definite if AUM sends out on each 8 ADAT channels (or 4 stereo pairs)

I need confirmation!

YZJustDatGuy

It says it’s supported on Arturia’s site
How well it works is a different story. I can’t see it now working how it should
Edit: And here’s a video

[Deleted User]

@Calverhall said:
Still desperate to know for definite if AUM sends out on each 8 ADAT channels (or 4 stereo pairs)

I need confirmation!

First 2 chs of AUM set to send to stereo outs, ch 3 & 4 set to send to mono outs.
Dropdown menu shows all the available outs of your interface, in my case babyface - 4 analog outs + 8 through ADAT. Same goes for ins.

Calverhall

@recccp said:

@Calverhall said:
Still desperate to know for definite if AUM sends out on each 8 ADAT channels (or 4 stereo pairs)

I need confirmation!

First 2 chs of AUM set to send to stereo outs, ch 3 & 4 set to send to mono outs.
Dropdown menu shows all the available outs of your interface, in my case babyface - 4 analog outs + 8 through ADAT. Same goes for ins.

Right, thats my big saving target now. Thank you, do you enjoy using it? Any working draw backs or things that disappoint you?

[Deleted User]

@Calverhall said:

@recccp said:

@Calverhall said:
Still desperate to know for definite if AUM sends out on each 8 ADAT channels (or 4 stereo pairs)

I need confirmation!

First 2 chs of AUM set to send to stereo outs, ch 3 & 4 set to send to mono outs.
Dropdown menu shows all the available outs of your interface, in my case babyface - 4 analog outs + 8 through ADAT. Same goes for ins.

Right, thats my big saving target now. Thank you, do you enjoy using it? Any working draw backs or things that disappoint you?

AUM is the best thing on iOS for me. Fits my workflow as it is, stable and flexible.
There are things I'd like to see in future, but those are only to fasten the already speedy workflow, like presets for full channel config, or even multiple channels at once (since AU midi), ms or sample delay module - as far as I remember these were confirmed by dev as future plans.
Regarding Babyface, imo RME makes the best interfaces on the market. You can get a cheaper one for sure and probably run into its limitations at some point, or stability issues or drop of support when the next new comes. This one I'm using for 5 years now, originally bought as mobile solution for my laptop, when iPads became a thing for music making they made it Class Compliant and still supported for pc, mac, ios - it's around 10 years old product now, discontinued 2 years ago and it still has probably the most stable drivers and the most flexible routing app available. Decent sounding clean preamps, built like a tank.
Cons:
Using the breakout cable can be messy.
Would be nice if you could power it from iPad, but with two preamps with switchable phantom power it's to be expected and with split usb cable included you can power it from usb charger or power bank without PSU.

hisdudeness

@recccp said:

@Calverhall said:

@recccp said:

@Calverhall said:
Still desperate to know for definite if AUM sends out on each 8 ADAT channels (or 4 stereo pairs)

I need confirmation!

First 2 chs of AUM set to send to stereo outs, ch 3 & 4 set to send to mono outs.
Dropdown menu shows all the available outs of your interface, in my case babyface - 4 analog outs + 8 through ADAT. Same goes for ins.

Right, thats my big saving target now. Thank you, do you enjoy using it? Any working draw backs or things that disappoint you?

AUM is the best thing on iOS for me. Fits my workflow as it is, stable and flexible.
There are things I'd like to see in future, but those are only to fasten the already speedy workflow, like presets for full channel config, or even multiple channels at once (since AU midi), ms or sample delay module - as far as I remember these were confirmed by dev as future plans.
Regarding Babyface, imo RME makes the best interfaces on the market. You can get a cheaper one for sure and probably run into its limitations at some point, or stability issues or drop of support when the next new comes. This one I'm using for 5 years now, originally bought as mobile solution for my laptop, when iPads became a thing for music making they made it Class Compliant and still supported for pc, mac, ios - it's around 10 years old product now, discontinued 2 years ago and it still has probably the most stable drivers and the most flexible routing app available. Decent sounding clean preamps, built like a tank.
Cons:
Using the breakout cable can be messy.
Would be nice if you could power it from iPad, but with two preamps with switchable phantom power it's to be expected and with split usb cable included you can power it from usb charger or power bank without PSU.

749USD Wow!!!!

willhindson

Just picked up an audiofuse on sale - it’s really flexible for my setup.

I sent a support request to arturia for an ios editor app and they said one is in the works, but not sure when it will be out

willhindson

A quick bump to this thread - would be great if other audiofuse owners could request the iOS app here. They did write back to me saying it's being developed but it's been ages...

https://forum.arturia.com/index.php?topic=92447.0