Loopy Pro: Create music, your way.

What is Loopy Pro? — Loopy Pro is a powerful, flexible, and intuitive live looper, sampler, clip launcher and DAW for iPhone and iPad. At its core, it allows you to record and layer sounds in real-time to create complex musical arrangements. But it doesnā€™t stop thereā€”Loopy Pro offers advanced tools to customize your workflow, build dynamic performance setups, and create a seamless connection between instruments, effects, and external gear.

Use it for live looping, sequencing, arranging, mixing, and much more. Whether you're a live performer, a producer, or just experimenting with sound, Loopy Pro helps you take control of your creative process.

Download on the App Store

Loopy Pro is your all-in-one musical toolkit. Try it for free today.

Dreaded 48K issue šŸ¤¦šŸ»ā€ā™‚ļø

BasseyBassey
in General App Discussion

So I have an Air 3 which as I understand is fixed at 48k when using GarageBand. When using BS-16i as a stand alone, I can go into the settings and change it to 48k from 44, but when used in GarageBand as an AUv3 it will not let me change it. Is there a remedy to make the AU correspond with the stand alone settings?

Comments

  • LorichsLorichs

    I donā€™t know but i have the same issue when sampling in EGpulse. Hopefully a fix for that is on the way.

  • BasseyBassey

    @Lorichs said:
    I donā€™t know but i have the same issue when sampling in EGpulse. Hopefully a fix for that is on the way.

    The only fix I know right now is to use an external interface that will allow you to set the rate to 44. It is a hardware issue, so I donā€™t think there will be a fix per se.

  • uncledaveuncledave

    @Bassey said:
    So I have an Air 3 which as I understand is fixed at 48k when using GarageBand. When using BS-16i as a stand alone, I can go into the settings and change it to 48k from 44, but when used in GarageBand as an AUv3 it will not let me change it. Is there a remedy to make the AU correspond with the stand alone settings?

    So, is your problem actually with BS-16i not recognizing the system sample rate of 48 kHz when used as AUv3 in GarageBand? That may be a problem for the BS-16i developer.

  • BasseyBassey

    Yes, thatā€™s it!

  • BasseyBassey

    I was hoping changing it in the standalone would cause the AU to update to that setting, but it didnā€™t workšŸ˜¢

  • espiegel123espiegel123

    @Bassey said:
    I was hoping changing it in the standalone would cause the AU to update to that setting, but it didnā€™t workšŸ˜¢

    An AU should always run at the host app's sample rate....otherwise you will have pitch issues.

    Why would you want the AU to run at 44.1 k if it is running inside a host that is running at 48k?

  • BasseyBassey

    @espiegel123 said:

    @Bassey said:
    I was hoping changing it in the standalone would cause the AU to update to that setting, but it didnā€™t workšŸ˜¢

    An AU should always run at the host app's sample rate....otherwise you will have pitch issues.

    Why would you want the AU to run at 44.1 k if it is running inside a host that is running at 48k?

    I donā€™t, itā€™s stuck at 44, I want it to run at 48

  • espiegel123espiegel123

    Iā€™d write to the developer and tell them that the plugin is not running at the host appā€™s sample rate.

    Does it compensate for the discrepancy ? It is technically possible for a plugin to run at a different sample rate and do the sample rate conversion to make sure the pitch is correct...(some AU always use the same sample rate and convert without the user know if because they do the fight thing)

  • LorichsLorichs

    @Bassey said:

    @Lorichs said:
    I donā€™t know but i have the same issue when sampling in EGpulse. Hopefully a fix for that is on the way.

    The only fix I know right now is to use an external interface that will allow you to set the rate to 44. It is a hardware issue, so I donā€™t think there will be a fix per se.

    Thanks, but right now I use Drambo for sampling. Yup i said the D-word šŸ˜..

  • NixNix

    https://www.bismark.jp/bs-16i-important-notice

    I saw this notice
    the automatic settings for the auv3 are currently not working correctly For M1 macs but would also mean the auv3 wouldn't be picking up the sample rate from the host Either.

    To keep your current settings, please proceed with the following steps.

    1. Make sure bs-16i version 4.1 is installed (will be available AppStore on Mar 12, 2021)
    2. Open your project including bs-16i AUv3 in the host app
    3. Open "Settings > Scenes" screen inside bs-16i AUv3 (This feature is available from version 4.1)
    4. Tap "Save As a New Scene..."

    Hope this helps

  • NixNix

    @Bassey

    There is a new update 4.1.1 that may fix your problem.

    If not drop a line to the dev.

  • BasseyBassey

    @Nix said:
    https://www.bismark.jp/bs-16i-important-notice

    I saw this notice
    the automatic settings for the auv3 are currently not working correctly For M1 macs but would also mean the auv3 wouldn't be picking up the sample rate from the host Either.

    To keep your current settings, please proceed with the following steps.

    1. Make sure bs-16i version 4.1 is installed (will be available AppStore on Mar 12, 2021)
    2. Open your project including bs-16i AUv3 in the host app
    3. Open "Settings > Scenes" screen inside bs-16i AUv3 (This feature is available from version 4.1)
    4. Tap "Save As a New Scene..."

    Hope this helps

    Iā€™ll give that a try!

Sign In or Register to comment.

Ā© Vanilla Keystone Theme 2025