Loopy Pro: Create music, your way.

What is Loopy Pro? — Loopy Pro is a powerful, flexible, and intuitive live looper, sampler, clip launcher and DAW for iPhone and iPad. At its core, it allows you to record and layer sounds in real-time to create complex musical arrangements. But it doesn’t stop there—Loopy Pro offers advanced tools to customize your workflow, build dynamic performance setups, and create a seamless connection between instruments, effects, and external gear.

Use it for live looping, sequencing, arranging, mixing, and much more. Whether you're a live performer, a producer, or just experimenting with sound, Loopy Pro helps you take control of your creative process.

Download on the App Store

Loopy Pro is your all-in-one musical toolkit. Try it for free today.

AUM Bus Routing.....A or B (No Eye Doctor Needed)

VmusicVmusic
edited December 2021 in General App Discussion

Hi,
I have a screen snapshot of my NAI (new and improved) AUM vioLin session.

After 'prepping' the incoming sound, I route it to 1 or 3 violin sounds....and then FINALLY - I put it through the REVERB rinse.

After the REVERB - I want it to go to EITHER the L[][]PER....or the AUM Record Channel

SooOOoo riddle me this. I put a Bus Send nodule in the Reverb Channel, and if it's activated the signal will go there; but what I really want is to ALWAYS send the signal to either A or B (the Looper or the AUM Recording Channel)

FYI - the mic input shown in Channel 1 - is actually, or will actually be my instrument input.

Any thoughts here?

Thanks

Comments

  • VmusicVmusic

    by the way…..someone asked me to play a wedding tomorrow night. Imma thinkin’ iPad, AUM and some EDM loopin’ for sure…

  • espiegel123espiegel123

    @Vmusic said:
    Hi,
    I have a screen snapshot of my NAI (new and improved) AUM vioLin session.

    After 'prepping' the incoming sound, I route it to 1 or 3 violin sounds....and then FINALLY - I put it through the REVERB rinse.

    After the REVERB - I want it to go to EITHER the L[][]PER....or the AUM Record Channel

    SooOOoo riddle me this. I put a Bus Send nodule in the Reverb Channel, and if it's activated the signal will go there; but what I really want is to ALWAYS send the signal to either A or B (the Looper or the AUM Recording Channel)

    FYI - the mic input shown in Channel 1 - is actually, or will actually be my instrument input.

    Any thoughts here?

    Thanks

    Put in two nodes. One for each bus. Map the same midi message to both but set them to inverse response.

  • ambrosiajamambrosiajam

    Add another bus send node and toggle them when you want to swap??

  • ambrosiajamambrosiajam

    It actually looks like you already have it set up for that, unless I am mistaken?

Sign In or Register to comment.

© Vanilla Keystone Theme 2025