Loopy Pro: Create music, your way.
What is Loopy Pro? — Loopy Pro is a powerful, flexible, and intuitive live looper, sampler, clip launcher and DAW for iPhone and iPad. At its core, it allows you to record and layer sounds in real-time to create complex musical arrangements. But it doesn’t stop there—Loopy Pro offers advanced tools to customize your workflow, build dynamic performance setups, and create a seamless connection between instruments, effects, and external gear.
Use it for live looping, sequencing, arranging, mixing, and much more. Whether you're a live performer, a producer, or just experimenting with sound, Loopy Pro helps you take control of your creative process.
Download on the App StoreLoopy Pro is your all-in-one musical toolkit. Try it for free today.
Comments
Wow. I would never have found that without you help. Thanks @samu 😊
Is not longer Drambo able to load state saved Audiolayer selected instrument? Can someone confirm this also? Thanks
I cant get acc vel in Euclidean sequencer to reverse how I need it. I can get it to reverse, when reversing 0-100% and I can change the 0-127 polarity on a faderfox pc12, which does nothing for Drambo knob.
but cant get knob to be show as off when its left in Drambo.
I can either choose for it to be off when left, on midi controller but in Drambo it will appear as off.
Not sure why it were chosen to be left= on, by design.
Can somebody please check
when load Drambo project,
AudioLayer auv3 no longer load selected patch?
Yep. Confirmed.
Thank you!
RU going to report it on the Beepstreet Forum?
Thank you for interesting in improove Drambo, I will report now.
EDIT; done http://forum.beepstreet.com/discussion/2326/audiolayer-auv3-empty-after-loading-drambo-project/p1?new=1
Drambo is so good ( even still at the initial setup stage, really )
Its cool with a scene controller. To not have a mapping for every synth and every effect and no import function synths and effects, in Drambo on a track basis. That just complicates everything and then further with re-setting up ( if there were a factory reset )
Good for drums ( yet I always complained )
Dual ipads. I get more tracks. Cant see why I couldnt just mix and master ( complete a finished track ) without a DAW.
But never used a DAW.
Some DAW users might use 100s and 100s of tracks.
When theres more tracks in Drambo. You might benefit from a ipad pro or Drambo on desktop.
but maybe still with additional dual ipads.
but I guess Im not knowing the potential of an ipad plus a macbook etc.
I still feed an AUM to a Drambo for a few synths ( without OCD )
Even a screen of MPE keyboard to Drambo.
Works here.
Make sure you invert the range (while mapping MIDI CC on Acc Vel) like this:
Cheers Rs.
Not sure I need now but will try mapping whilst adjusting the range.
Might need for a Euclidean synth setup.
Not for Eucidean drums now.
Been trying to find a use for a faderfox p12. Although maybe needed for pseudo djing.
Will likely just be a pan and volume array for Drambos. Quicker than screen. Plus I dont have solos in Drambo. I think becuase of bus lanes.
If mapping a controller for all tracks in Drambo. Pan. Vol.
Thinking mapping a low pass filter per track might be good.
Edit.
Would a dj filter be better?
Does it actually mean low and high pass?
Theres the Jax dj filter.
Not sure if theres others.
Not sure if as nice as other filter.
But does it mean it will tame frequencies kind of just as good?
A DJ filter is typically a filter with 3 bands on each of the 2 (or 4) stereo channels that finds its main purpose in muting (also: "kill switches") or adjusting the low, mid and high frequency range.
This is useful when mixing tracks that both have a unique, dominant bass response but mixing the full spectrum of both would produce too many mud sharks so killing or reducing the bass of one track makes a smoother listening experience.
Could also be used for adding e.g. HiHats from a different track by using only the treble range of the other track.
A fully parametric will allow for much more precise adjustments but the advantage of DJ style EQs is the simplicity and speed in use.
Cheers.
Thought of how id map the faderfox pc12. Thought vol and pan might be good. I can use pan to find a sound.
Theres a knob spare for each track.
Does Drambo have a parametric filter?
Should I allocate the spare knob per track for a filter?
In case I cant find a frequency in the patch?
but most synths have a filter.
and drums in Fac drum are quite tweakable.
But I guess the spare knob might be good for additional filters anyway?
Can somebody confirm please, MIDIMORPHOSIS2 is not state saving (error) in Drambo after load project?
In AUM , THE MIDIMORPHOSIS2 is restored , but in Drambo I get error.
EDIT; behaviour is different than simply error. Sometimes MIDIMORPHOSIS load, sometimes there is error. It is similar to when I fast change multiple saved preset in `Drambo contains MiRack (fast switching there or more), then error occur.
Similar with MIDIMORPHOSIS , loading Drambo presets included MIDImorphosis gives effect in loading auv3 or sometimes error.
@sigma79 You could build an all-in-one filter that combines multiple filter types, all controlled by one knob only.
Depends on what you want.
With Drambo, you could have a knob that does nothing when at the center, cuts treble when turned left and cuts bass when turned right.
Whatever you like
Here's a ready made one for you @sigma79
When the knob is at centre position it does nothing like rs2000 has said,
turn to the left and it's a Lo-pass filter and turn it to the right and it's a Hi-pass filter.
the opposite to what rs2000 has described.
You can open up the module and switch them around of course.
Enjoy.
https://patchstorage.com/dual-hi-pass-lo-pass-filter/
Ok now did I miss something but the wavetable Osc gone from modules list, like wtf.. reinstalled app didn’t help. I bought it long time ago.. it’s not even in store. I don’t get it.
That is really odd, what does the Shop show for you?
Take a screenshot and make a post over at Forum.Beepstreet.com
Cheers Gravitas.
I already found this page ( when searching dj filter )
Is it better than parametric?
Will add to controller anyway.
I just theorised if Id need filters and dont have much use for controller.
Pan, vol and filter though.
Seems nice.
When thinking about a parametric Eq, think the shape of a bell
whereas the D.J filter is more of a curve that goes left and then goes right.
Neither is better, it's what is suitable to the task at hand.
That's what one is meant to do.
Mapping controllers to the filters is the way forward.
So much more fun.
It should always be listed under "Generator", no matter if purchased or not.
Cheers Grav.
Can anyone check. If using an easy midi controller ( no computer needed to change midi data )
Drambo. Track 11. Midi ch 16. CC 64.
I had to supply a different cc number.
On controller. All data seemed ok and in order.
Dont think the data were used with another controller but believe I deleted the few other mappings made and also tried in a new setup.
The data worked in AUM.
Drambo couldnt recieve data on midi ch 16. CC 64. Track 11. Volume on mixer page.
The Mixer lol
@sigma79
CC64 is used by another controller: Drambo will interpret it as the sustain pedal that is also sent by a typical MIDI keyboard when used.
cool set-up! @sigma79
Sorry I lied, it was in store initially but due to design change I missed it. So I bought it on my other phone like a year ago..then I installed Drambo on iPad , iOS 15 , and on another phone with ios16. And it was not even in that list of osc, on both. Restore did nothing. Sadly I didn’t took screens. Then decided to buy it again expecting some sort of error (because it’s purchased already) but no, system allowed to buy second time lol. And then it appeared both on iPad and the new phone. Super strange.
Is there a way to do midi learn with apps? Like control stuff with with the app? There’s a Mozaic script that makes the nk2 have 15 banks and in AUM, I route the nk2 to Mozaic and Mozaic to the nk2 and the. route Mozaic to the MIDI control and can do midi learn with Mozaic between the nk2 and AUM so it won’t listen to the nk2 directly but I can’t really figure out how to do that routing in Drambo. I need to route mozaic to the nk2 and then the nk2 back to Mozaic but then have midi learn only listen to Mozaic. If that makes any sense cos idk if I explained it well enough
MIDI Learn may be tricky, but you can enter the CC#, etc. manually. Not sure about blocking the direct inputs from nk2, though.