Loopy Pro: Create music, your way.

What is Loopy Pro? — Loopy Pro is a powerful, flexible, and intuitive live looper, sampler, clip launcher and DAW for iPhone and iPad. At its core, it allows you to record and layer sounds in real-time to create complex musical arrangements. But it doesn’t stop there—Loopy Pro offers advanced tools to customize your workflow, build dynamic performance setups, and create a seamless connection between instruments, effects, and external gear.

Use it for live looping, sequencing, arranging, mixing, and much more. Whether you're a live performer, a producer, or just experimenting with sound, Loopy Pro helps you take control of your creative process.

Download on the App Store

Loopy Pro is your all-in-one musical toolkit. Try it for free today.

Beatmaker 3 workflow hold up

ShazammShazamm
in General App Discussion

Is there a way when making your own kits that the sounds aren’t set to hold. I want them set to one shot? I hate every time i make a kit i have to go in and change each sample to one shot

Comments

  • SamuSamu

    Go to Settings & Behaviour and change Pad/Layer defaults to suit your needs.
    (Ie. toggle between One Shot / Hold).

  • ShazammShazamm

    @Samu said:
    Go to Settings & Behaviour and change Pad/Layer defaults to suit your needs.
    (Ie. toggle between One Shot / Hold).

    It’s already set to one shot but its not actually doing it

  • SamuSamu

    @Shazamm said:

    @Samu said:
    Go to Settings & Behaviour and change Pad/Layer defaults to suit your needs.
    (Ie. toggle between One Shot / Hold).

    It’s already set to one shot but its not actually doing it

    Then that's a BUG that needs fixing. I usually prefer 'hold' so I haven't noticed this 'bug' before :(
    Maybe @tk32 can assist here...

    I don't have a clue if a new update is in the works and if it is what year will it drop... 2020, 2021?

  • ShazammShazamm

    @Samu said:

    @Shazamm said:

    @Samu said:
    Go to Settings & Behaviour and change Pad/Layer defaults to suit your needs.
    (Ie. toggle between One Shot / Hold).

    It’s already set to one shot but its not actually doing it

    Then that's a BUG that needs fixing. I usually prefer 'hold' so I haven't noticed this 'bug' before :(
    Maybe @tk32 can assist here...

    I don't have a clue if a new update is in the works and if it is what year will it drop... 2020, 2021?

    Maybe ill message him directly in Discord

  • SamuSamu

    @Shazamm said:

    Maybe ill message him directly in Discord

    +1 That's the way to go...

  • wimwim

    @Shazamm said:

    @Samu said:
    Go to Settings & Behaviour and change Pad/Layer defaults to suit your needs.
    (Ie. toggle between One Shot / Hold).

    It’s already set to one shot but its not actually doing it

    Do you mean "it didn't change existing banks" or "it isn't defaulting to one-shot" for new kits? Changing the setting only affects new samples that you're adding. It doesn't go back and change any banks you already made.

  • tk32tk32
    edited December 2019

    @wim has it right.

    If you have your settings set to ‘one shot’ AND any new banks are still loading with in ‘hold’ mode then that does sound like a glitch/bug. Perhaps try force quitting BM3 / rebooting the ipad / starting a new project.

    If none of those things work, reply back here and I’ll raise it with the dev as a suspected bug (for further testing)

  • hansjbshansjbs
    edited December 2019

    I replied to you earlier today about this.

    This is not a bug. Just tested this right now. If the kits were already created, changing the default to one shot will not automatically change every kit you already made. It only affects dragging samples to pad and making new kits after changing default settings. I tested this using the same sample in the same project by adding and deleting the sample after I made the setting changes several times. I suggest going thru your already made kits and setting them to one shot and re-save.

  • ShazammShazamm

    @hansjbs said:
    I replied to you earlier today about this.

    This is not a bug. Just tested this right now. If the kits were already created, changing the default to one shot will not automatically change every kit you already made. It only affects dragging samples to pad and making new kits after changing default settings. I tested this using the same sample in the same project by adding and deleting the sample after I made the setting changes several times. I suggest going thru your already made kits and setting them to one shot and re-save.

    Thats exactly what Im doing new loops dragging them to the pads

  • hansjbshansjbs

    @Shazamm said:

    @hansjbs said:
    I replied to you earlier today about this.

    This is not a bug. Just tested this right now. If the kits were already created, changing the default to one shot will not automatically change every kit you already made. It only affects dragging samples to pad and making new kits after changing default settings. I tested this using the same sample in the same project by adding and deleting the sample after I made the setting changes several times. I suggest going thru your already made kits and setting them to one shot and re-save.

    Thats exactly what Im doing new loops dragging them to the pads

    I don't know what's going then. I've had a couple people test this and it works for them same way it does for me.

  • [Deleted User][Deleted User]
    The user and all related content has been deleted.
  • ShazammShazamm

    @hansjbs said:

    @Shazamm said:

    @hansjbs said:
    I replied to you earlier today about this.

    This is not a bug. Just tested this right now. If the kits were already created, changing the default to one shot will not automatically change every kit you already made. It only affects dragging samples to pad and making new kits after changing default settings. I tested this using the same sample in the same project by adding and deleting the sample after I made the setting changes several times. I suggest going thru your already made kits and setting them to one shot and re-save.

    Thats exactly what Im doing new loops dragging them to the pads

    I don't know what's going then. I've had a couple people test this and it works for them same way it does for me.

    would you like me to do a video for you sir

  • hansjbshansjbs

    @StudioES said:
    Just tested - I noticed it occasionally happens after "heavy multi-tasking" on the iPad, i.e. - using lots of apps at the same time - Insta, YT, Twatter, FB, etc...

    iOS memory management woes likely.

    Before working in BM3, force-close all open apps, then do a memory-reset.

    Details here: https://forum.audiob.us/discussion/32989/soft-reboot-on-devices-without-a-home-button

    OP, feel free to log this in the bug-tracker.

    Yep I knew it had to be something weird. :D :D . thanks @StudioES

  • hansjbshansjbs

    @Shazamm said:

    @hansjbs said:

    @Shazamm said:

    @hansjbs said:
    I replied to you earlier today about this.

    This is not a bug. Just tested this right now. If the kits were already created, changing the default to one shot will not automatically change every kit you already made. It only affects dragging samples to pad and making new kits after changing default settings. I tested this using the same sample in the same project by adding and deleting the sample after I made the setting changes several times. I suggest going thru your already made kits and setting them to one shot and re-save.

    Thats exactly what Im doing new loops dragging them to the pads

    I don't know what's going then. I've had a couple people test this and it works for them same way it does for me.

    would you like me to do a video for you sir

    Nahhh not for me. If you want to do a video post it in the BM3 forum, beta on discord or log it.

  • ShazammShazamm

    @hansjbs said:

    @Shazamm said:

    @hansjbs said:

    @Shazamm said:

    @hansjbs said:
    I replied to you earlier today about this.

    This is not a bug. Just tested this right now. If the kits were already created, changing the default to one shot will not automatically change every kit you already made. It only affects dragging samples to pad and making new kits after changing default settings. I tested this using the same sample in the same project by adding and deleting the sample after I made the setting changes several times. I suggest going thru your already made kits and setting them to one shot and re-save.

    Thats exactly what Im doing new loops dragging them to the pads

    I don't know what's going then. I've had a couple people test this and it works for them same way it does for me.

    would you like me to do a video for you sir

    Nahhh not for me. If you want to do a video post it in the BM3 forum, beta on discord or log it.

    yes sir I will when I get a chance

Sign In or Register to comment.