Loopy Pro: Create music, your way.

What is Loopy Pro? — Loopy Pro is a powerful, flexible, and intuitive live looper, sampler, clip launcher and DAW for iPhone and iPad. At its core, it allows you to record and layer sounds in real-time to create complex musical arrangements. But it doesn’t stop there—Loopy Pro offers advanced tools to customize your workflow, build dynamic performance setups, and create a seamless connection between instruments, effects, and external gear.

Use it for live looping, sequencing, arranging, mixing, and much more. Whether you're a live performer, a producer, or just experimenting with sound, Loopy Pro helps you take control of your creative process.

Download on the App Store

Loopy Pro is your all-in-one musical toolkit. Try it for free today.

Issues with iConnectAudio4+ and Audiobus 3 (midisteps and MidiLFOS now solved)

1235

Comments

  • CarnbotCarnbot

    @Munibeast said:

    So you can load everything into AB3 consistently while connected to the ICA?

    Currently yes.
    What else is the iCA attached to? A computer or nothing or another ipad?

  • gonekrazy3000gonekrazy3000

    @munibeast. could you send us a screenshot of your settings in the iconfig app on pc/mac ?

  • gonekrazy3000gonekrazy3000


    Here's my current settings. don't have any issues with this. even with a Pc and my ipad connected simultaneously (although in the screenshot my ipad is currently disconnected)

  • gonekrazy3000gonekrazy3000


    and my current input matrix settings. this lets me have 5 stereo or 10 mono streams from my ipad to pc.

  • CarnbotCarnbot

    That's interesting mine is the same 3,3,2,4,1
    But I've got a different mixer configuration.
    Try that @Munibeast

  • MunibeastMunibeast

    @Carnbot said:
    @Munibeast said:

    So you can load everything into AB3 consistently while connected to the ICA?

    Currently yes.
    What else is the iCA attached to? A computer or nothing or another ipad?

    Nothing else, just one iPad or iPhone

  • gonekrazy3000gonekrazy3000

    @Munibeast said:

    @Carnbot said:
    @Munibeast said:

    So you can load everything into AB3 consistently while connected to the ICA?

    Currently yes.
    What else is the iCA attached to? A computer or nothing or another ipad?

    Nothing else, just one iPad or iPhone

    try to mirror my settings. 3,3,2,4,1. genuinely curious if it fixes things for you.

  • MunibeastMunibeast

  • gonekrazy3000gonekrazy3000

    @Munibeast said:

    is this after the settings change ?

  • MunibeastMunibeast

    @gonekrazy3000 said:

    @Munibeast said:

    is this after the settings change ?

    I'm changing settings to match yours now. Crossing fingers...

  • MunibeastMunibeast

    Unchanged. Rebooted the iPad too. No joy...

  • MunibeastMunibeast
    edited April 2017

    Thanks anyways, @gonekrazy3000 and @Carnbot, I'll try some more things later and report back.

  • MunibeastMunibeast
    edited April 2017

    My iConfig Mac version keeps crashing on launch now. Have to check what's up with that.

    Edit: Installed a newer version that isn't crashing. And my settings are now exactly like yours, @gonekrazy3000. There must be something else that's wrong.

  • CarnbotCarnbot

    Ok so it looks like there are sometimes problems still on my end.
    I started a session on my second ica4 and all the apps were stuck needing a fix. Reset the ipad but didn't help.
    But then I reset my ica4 (by pushing the dial on the front until it was off and on again)
    Then it worked after that.

  • gonekrazy3000gonekrazy3000

    @Carnbot said:
    Ok so it looks like there are sometimes problems still on my end.
    I started a session on my second ica4 and all the apps were stuck needing a fix. Reset the ipad but didn't help.
    But then I reset my ica4 (by pushing the dial on the front until it was off and on again)
    Then it worked after that.

    Yea. The switch off and on definitely fixes things on my end too. It's usually shut it off and on before every Audiobus​ session so it's been pretty painless for me.

  • MunibeastMunibeast

    So what hardware version do you guys have @Carnbot & @gonekrazy3000? Mine is 1.0.

  • gonekrazy3000gonekrazy3000

    @Munibeast said:
    So what hardware version do you guys have @Carnbot & @gonekrazy3000? Mine is 1.0.

    That actually is a good question. Where is the hardware version listed ?

  • MunibeastMunibeast

    @gonekrazy3000 said:

    @Munibeast said:
    So what hardware version do you guys have @Carnbot & @gonekrazy3000? Mine is 1.0.

    That actually is a good question. Where is the hardware version listed ?

    Should be on the first page iirc, right below the firmware version.

  • gonekrazy3000gonekrazy3000

    @Munibeast said:

    @gonekrazy3000 said:

    @Munibeast said:
    So what hardware version do you guys have @Carnbot & @gonekrazy3000? Mine is 1.0.

    That actually is a good question. Where is the hardware version listed ?

    Should be on the first page iirc, right below the firmware version.

    Firmware 1.1.0
    Hardware version 1.0

    seems to be identical to you :/

  • MunibeastMunibeast

    Okay, so that's not it then. I don't know if there's a newer version than 1.0 anyways.

  • CarnbotCarnbot

    I have a 1.0 too and think it's the only one so far.

  • xlodxxlodx

    Hello! I want to add:
    I have also a ica4+ and I also have the "Tab to Fix" message - sadly it is unfixable by following the instructions.

    I am using AB3 together with Cubasis and DM1.

    ica4+
    Firmware 1.1.0
    Hardware version 1.0

    iPad Air
    iOS 10.3.1

    What does work but is buggy AF is:
    1. Start AB3
    2. Launch Cubasis
    3. Connect ica4+ to iPad
    4. Launch DM1

  • gonekrazy3000gonekrazy3000

    Oh God. I just realised I was on iOS 10.3. and I just updated to 10.3.1. hope it didn't break things now. Will know in a little while when I get home :/

  • MunibeastMunibeast

    @gonekrazy3000 said:
    Oh God. I just realised I was on iOS 10.3. and I just updated to 10.3.1. hope it didn't break things now. Will know in a little while when I get home :/

    No, I was on 10.3 when testing before and updated now without improvements so I wouldn't expect it to change anything.

  • n13n13

    If I launch AB3 and open my preset with tonestack (just updated with AB3) and vocalive without the ica4+ connected, it starts up. If I then quit AB3, connect the ica4+ and restart AB3 - it seems to work fine.

  • MunibeastMunibeast

    @n13 said:
    If I launch AB3 and open my preset with tonestack (just updated with AB3) and vocalive without the ica4+ connected, it starts up. If I then quit AB3, connect the ica4+ and restart AB3 - it seems to work fine.

    I had that too but it's inconsistent.

  • nytjadensnytjadens

    Any updates on this? AB3 not playing nice with my Apogee Quartet... wondering if anyone else is having issues with their audio interfaces.

    Thanks :-)

  • gonekrazy3000gonekrazy3000

    @nytjadens said:
    Any updates on this? AB3 not playing nice with my Apogee Quartet... wondering if anyone else is having issues with their audio interfaces.

    Thanks :-)

    The betas we're testing are a lot more stable. At least on my interfaces. Hopefully it will come out soon alongside the new AUM update :)

  • CarnbotCarnbot

    Still get some issues sometimes with my iconnectaudio4 hope the next update fixes it.

  • MunibeastMunibeast

    My beta still seems to need AB3 started before connecting the ICA4+.

Sign In or Register to comment.

© Vanilla Keystone Theme 2025