D-1 Hybrid Synth from the AudioKit Team.

oddquad

Fantastic

[Deleted User]

Yeah, sounds good.
Also....16.5K views in a few days. Maybe the most visited thread yet in this forum in this short time.

Processaurus

Got it and just started trying it out, cool sounds, but am running into problems. where should we send bug reports?@analog_matt

Mark B

I don’t think anyone’s mentioned it so am I the only one that can’t get this to load as an IAA? It just times out in AUM and Cubasis. Would reinstalling it help?

rarien

Looks like I'm experiencing some heavy static noises usually whenever stereo-delay is enabled. But I can also seem to trigger it while reverb is on at times. Can turn turn down the stereo-delay mix to cut out the static but not the case for reverb. Changing presets gets the static to stop but not without keeping stereo-delay or reverb set to off.

stormywaterz

Couldn’t get it to load in bm3 either

analog_matt

@Processaurus said:
Got it and just started trying it out, cool sounds, but am running into problems. where should we send bug reports?@analog_matt

Thanks, please send bug reports to [email protected]
And, thank you!

[Deleted User]

@stormywaterz said:
Couldn’t get it to load in bm3 either

If you open it first & then open BM3, then load it in BM3 it will work fine. Same with AUM & Studiomux.

[Deleted User]

@Mark B said:
I don’t think anyone’s mentioned it so am I the only one that can’t get this to load as an IAA? It just times out in AUM and Cubasis. Would reinstalling it help?

Open D-1 first then open it in AUm & it will load up fine. I don't have cubasis, but it's probably the same.

JohnnyGoodyear

Obvious question (perhaps already answered) but any way to save sequences? In a perfect future world I would also love to be able to chain them together (do feel free to steal from SPA , but I'd like to at least be able to save odd ones that I luck into etc.

EDIT: And yes, have a veritable blast with this etc...

Mark B

@Iso said:

@Mark B said:
I don’t think anyone’s mentioned it so am I the only one that can’t get this to load as an IAA? It just times out in AUM and Cubasis. Would reinstalling it help?

Open D-1 first then open it in AUm & it will load up fine. I don't have cubasis, but it's probably the same.

Ok, that works. Thanks

[Deleted User]

@Mark B said:

@Iso said:

@Mark B said:
I don’t think anyone’s mentioned it so am I the only one that can’t get this to load as an IAA? It just times out in AUM and Cubasis. Would reinstalling it help?

Open D-1 first then open it in AUm & it will load up fine. I don't have cubasis, but it's probably the same.

Ok, that works. Thanks

Cool. glad it worked for you.

Mark B

Well, this synth is so beautiful sounding it literally bought tears to my eyes playing through the presets. Amazing job from the team.

[Deleted User]

No 3 in U.K app store now.

david_2017

Germany here
5# Place overall paid and 1# music 💪🏼
Congrats guys!!!

[Deleted User]

The user and all related content has been deleted.

cyberheater

Request to have sequencer as a modulation source.
Also, detune semitones as a modulation destination.

rs2000

@cyberheater said:
I've notice voice stealing. Get a pad. Play a low note and keep playing higher note chords. The low note will eventually disappear.

Not only that, I can also produce stuck notes when wildly jamming on the on-screen keyboard.

MrBlaschke

@rs2000 said:
Not only that, I can also produce stuck notes when wildly jamming on the on-screen keyboard.

Yeah. Confirmed. Had that yesterday using my external MPKmini. More than once.
Strangely it was always a "black key" that got stuck - and i only hammered the white ones.

rs2000

@Dawdles said:
Like some of the sounds in the demos. Probably pick this up in hope that the AUv3 arrives in near future like mentioned. A few questions -

Anyone using with BM3? Solid or enough bugs to be really annoying?

Are all parameters automatable via cc?

Has Midi learn?

Can you save a user sequence with a user patch?

@Matt_Fletcher_2000 do you think that @samu and others’ request for the pcm browsing to be switched to bigger list window will be implemented? Scrolling up/down one at a time sounds like modern hell

Thanks

Wouldn't the list of pcm waveforms even better be shown on the upper half of the screen as a large table like in iWavestation, with the keyboard still being playable while trying out different sounds?
Having pcm waves always at the same screen position can accelerate sound-finding a lot!

[Deleted User]

The user and all related content has been deleted.

[Deleted User]

The user and all related content has been deleted.

rs2000

@Dawdles said:

@rs2000 said:

@Dawdles said:
Like some of the sounds in the demos. Probably pick this up in hope that the AUv3 arrives in near future like mentioned. A few questions -

Anyone using with BM3? Solid or enough bugs to be really annoying?

Are all parameters automatable via cc?

Has Midi learn?

Can you save a user sequence with a user patch?

@Matt_Fletcher_2000 do you think that @samu and others’ request for the pcm browsing to be switched to bigger list window will be implemented? Scrolling up/down one at a time sounds like modern hell

Thanks

Wouldn't the list of pcm waveforms even better be shown on the upper half of the screen as a large table like in iWavestation, with the keyboard still being playable while trying out different sounds?
Having pcm waves always at the same screen position can accelerate sound-finding a lot!

Yep the more the merrier

I'm a big fan of using the iPad screen to its full extent.
Imagine, screen estate is better used by ad banners than by apps, although developers don't have to pay a cent for it

[Deleted User]

@Dawdles said:
Are we talking an ‘Intro price = buggy mess’ arrangement here?

No, I’ve had many apps that have been as buggy with no intro price and a lot of the time it’s just fine.

[Deleted User]

The user and all related content has been deleted.

AlterEgo_UK

Got to be one of the sweetest synths for pads - and lots of other great presets too. Just need to find the time to take full advantage of them.
Off to leave a 5 star review!
Thanks very much @analog_matt and team!

brice

@Dawdles said:
Like some of the sounds in the demos. Probably pick this up in hope that the AUv3 arrives in near future like mentioned. A few questions -

Anyone using with BM3? Solid or enough bugs to be really annoying?

Someone else will need to chime in on this one as I don’t use BM3.

Are all parameters automatable via cc?

Yes

Has Midi learn?

Yes

Can you save a user sequence with a user patch?

No

@Matt_Fletcher_2000 do you think that @samu and others’ request for the pcm browsing to be switched to bigger list window will be implemented? Scrolling up/down one at a time sounds like modern hell

Wrong Matt, you’re looking for @analog_matt. I understand what you’re saying re: browsing PCM samples. On paper it does sound tedious. But in my experience with it I haven’t found it to be a thing that’s bothered me. And I’ve been knee deep for several weeks with it. What saves it from being a pain is the inertia scrolling. It’s the same interaction as something like the iOS alarm clock interface. You’re never advancing through samples one swipe at a time in other words. Plus, if you fancy a randomizer you can always play PCM Roulette. Just give it a quick swipe and accept your fate.

Thanks

TheOriginalPaulB

@Dawdles said:
Are we talking an ‘Intro price = buggy mess’ arrangement here?

I don’t necessarily have a problem with that, it’s cheap and sometimes having something with bugs is better than not having it all (obvs if bugs are fixable.)..just good to know before buying how bad shape it’s in and if it’s gonna cause more frustration than use.

Only you can answer that question, since it depends on how easily you get frustrated...

Jumpercollins

Thought I better rename the thread title as this is obviously a AudioKit Team effort with Matthew Fecher leading the charge so credit to all from AudioKit.

brambos

Very nice. I'm a sucker for pads, and this delivers mucho.