Loopy Pro: Create music, your way.

What is Loopy Pro? — Loopy Pro is a powerful, flexible, and intuitive live looper, sampler, clip launcher and DAW for iPhone and iPad. At its core, it allows you to record and layer sounds in real-time to create complex musical arrangements. But it doesn’t stop there—Loopy Pro offers advanced tools to customize your workflow, build dynamic performance setups, and create a seamless connection between instruments, effects, and external gear.

Use it for live looping, sequencing, arranging, mixing, and much more. Whether you're a live performer, a producer, or just experimenting with sound, Loopy Pro helps you take control of your creative process.

Download on the App Store

Loopy Pro is your all-in-one musical toolkit. Try it for free today.

Koala - the ultimate pocket-sized sampler

1…7172747677…84

Comments

  • cuberoo_cuberoo_
    edited February 2022

    @elf_audio said:
    @bibenu the knobs you n your launchkey mini only have 127 steps - is that enough resolution for you? If you’re editing A 2 minute sample, you would only be able to adjust to the nearest second. That’s why I haven’t done it, not because it’s difficult but mostly to save all the complaints I would have to respond to with a lesson about midi!

    for those of us that use controllers with endless encoders, e.g. push 2, twister, and xone in my case, then this would not be such an issue.

    although, i know that this would require for you to support endless encoders too :-)

  • SamuSamu

    For me pinch & zoom using fingers is way faster than using knobs, but that's personal preference...

    I've tried to become 'friends' with knob-based sample editing in MPC Beats but it irks me to the point that I deleted the app completely from my desktop and I won't be re-installing it...

    If 'knob based' editing would pop up it should be for incremental knobs only (ie. endless encoders) as the fixed knobs 0-127 would get wonky when you reach the end of the dial and need to get back to 0 or 127 without hmmm, moving the editing point...

    To avoid 'clicks' when using the encoders it would have to be automatic next/previous x-crossing when moving the start & end points.

    @elf_audio If you pursue the midi-knobs-for-sample-editng, please do first add proper support for selecting inputs/outputs on multi-channel interfaces (both iOS/macOS). USB L&R is a good start but when the interface has more ports having access to those could be handy as well... (like 1,2,3,4 (Mono) and 1&2, 3&4 (Stereo) etc. etc).

    Cheers!

  • wimwim
    edited February 2022

    @cuberoo_ said:

    @elf_audio said:
    @bibenu the knobs you n your launchkey mini only have 127 steps - is that enough resolution for you? If you’re editing A 2 minute sample, you would only be able to adjust to the nearest second. That’s why I haven’t done it, not because it’s difficult but mostly to save all the complaints I would have to respond to with a lesson about midi!

    for those of us that use controllers with endless encoders, e.g. push 2, twister, and xone in my case, then this would not be such an issue.

    It would still be the same issue. Even with an endless encoder, there are still only 128 available CC values. The only difference is in the way the encoder signals a change in value either up or down rather than in absolute values.

  • BusMaxxBusMaxx

    @bibenu said:
    Feature request: Allow midi control of sample start and end points when trimming samples.

    I find the touch screen fiddly for these things.

    Anyone one else interested in that ? I'd be very happy to be able to slide start and endpoints with midi CCs from the knobs on my Launchkey mini.

    @bibenu said:
    Feature request: Allow midi control of sample start and end points when trimming samples.

    I find the touch screen fiddly for these things.

    Anyone one else interested in that ? I'd be very happy to be able to slide start and endpoints with midi CCs from the knobs on my Launchkey mini.

    Asking for months!

  • espiegel123espiegel123

    @wim said:

    @cuberoo_ said:

    @elf_audio said:
    @bibenu the knobs you n your launchkey mini only have 127 steps - is that enough resolution for you? If you’re editing A 2 minute sample, you would only be able to adjust to the nearest second. That’s why I haven’t done it, not because it’s difficult but mostly to save all the complaints I would have to respond to with a lesson about midi!

    for those of us that use controllers with endless encoders, e.g. push 2, twister, and xone in my case, then this would not be such an issue.

    It would still be the same issue. Even with an endless encoder, there are still only 128 available CC values. The only difference is in the way the encoder signals a change in value either up or down rather than in absolute values.

    With endless controllers interpreted with relative midi, software can interpret the incoming increments as finely as it wants. It doesn't have to map to a range of 128 values. Without relative midi, one could use 14-bit midi. one cc for coarse adjustment and one for fine.

  • wimwim
    edited February 2022

    @espiegel123 said:

    @wim said:

    @cuberoo_ said:

    @elf_audio said:
    @bibenu the knobs you n your launchkey mini only have 127 steps - is that enough resolution for you? If you’re editing A 2 minute sample, you would only be able to adjust to the nearest second. That’s why I haven’t done it, not because it’s difficult but mostly to save all the complaints I would have to respond to with a lesson about midi!

    for those of us that use controllers with endless encoders, e.g. push 2, twister, and xone in my case, then this would not be such an issue.

    It would still be the same issue. Even with an endless encoder, there are still only 128 available CC values. The only difference is in the way the encoder signals a change in value either up or down rather than in absolute values.

    With endless controllers interpreted with relative midi, software can interpret the incoming increments as finely as it wants. It doesn't have to map to a range of 128 values. Without relative midi, one could use 14-bit midi. one cc for coarse adjustment and one for fine.

    That's a good point about the software being able to interpret the up/down signal of the encoder. It would need some setting for the sensitivity on a per sample basis though. If you did that, you could do the same for sensitivity of absolute controllers as well. They wouldn't be quite as versatile as endless encoders though.

  • cuberoo_cuberoo_

    @wim said:

    @espiegel123 said:

    @wim said:

    @cuberoo_ said:

    @elf_audio said:
    @bibenu the knobs you n your launchkey mini only have 127 steps - is that enough resolution for you? If you’re editing A 2 minute sample, you would only be able to adjust to the nearest second. That’s why I haven’t done it, not because it’s difficult but mostly to save all the complaints I would have to respond to with a lesson about midi!

    for those of us that use controllers with endless encoders, e.g. push 2, twister, and xone in my case, then this would not be such an issue.

    It would still be the same issue. Even with an endless encoder, there are still only 128 available CC values. The only difference is in the way the encoder signals a change in value either up or down rather than in absolute values.

    With endless controllers interpreted with relative midi, software can interpret the incoming increments as finely as it wants. It doesn't have to map to a range of 128 values. Without relative midi, one could use 14-bit midi. one cc for coarse adjustment and one for fine.

    That's a good point about the software being able to interpret the up/down signal of the encoder. It would need some setting for the sensitivity on a per sample basis though. If you did that, you could do the same for sensitivity of absolute controllers as well. They wouldn't be quite as versatile as endless encoders though.

    that's a good idea for a per sample sensitivity setting.

  • JeezsJeezs

    @bibenu said:
    Feature request: Allow midi control of sample start and end points when trimming samples.

    I find the touch screen fiddly for these things.

    Anyone one else interested in that ? I'd be very happy to be able to slide start and endpoints with midi CCs from the knobs on my Launchkey mini.

    +1

  • stormbeatsstormbeats

    @elf_audio hi hope alls well. Can you put back the option to turn on/off background audio in settings. On my iPhone SE Koala sound is cut off if I switch to other apps whilst Koala is in play mode.
    Also can you re add Interapp Host Sync On/Off setting. Not all apps have this option and makes Koala locked to Host Sync. I been trying to find the option to turn ON/OFF in AUM but can’t find it

  • espiegel123espiegel123
    edited February 2022

    Post deleted…didn’t realize I did not have the latest update.

  • elf_audioelf_audio

    @stormbeats it will be back in the next version, sorry about that! accidentally commented it out in the last update. I think you're going to like the next update, honestly I hope to call it the stormbeats update.

  • stormbeatsstormbeats

    @elf_audio said:
    @stormbeats it will be back in the next version, sorry about that! accidentally commented it out in the last update. I think you're going to like the next update, honestly I hope to call it the stormbeats update.

    @elf_audio :) nice one thanks Looking forward to it

  • RajahPRajahP

    Seems much smoother since the last update …Thanks.

    Can you ‘transpose’ all pads (whole project) 'globally' to a different key.... like the Launchpad app?

  • stormbeatsstormbeats

    @RajahP said:
    Seems much smoother since the last update …Thanks.

    Can you ‘transpose’ all pads (whole project) 'globally' to a different key.... like the Launchpad app?

    @elf_audio @RajahP this is a good suggestion

  • elf_audioelf_audio
    edited February 2022

    @RajahP the PITCH effect is actually just the global pitch.

  • stormbeatsstormbeats

    @elf_audio said:
    @RajahP the PITCH effect is actually just the global pitch.

    @elf_audio true

  • RajahPRajahP
    edited February 2022

    @elf_audio said:
    @RajahP the PITCH effect is actually just the global pitch.

    Ok.. I’ll look at it.. but I think this makes the Launchpad app, magical..

    Edit.. it brings ‘chills’ to hear a project fit into a totally different song, in a different key..

  • BusMaxxBusMaxx

    Stormbeats Update is out.

  • echooperaechoopera

    WOW! This Update is INSANELY GREAT!!!! @elf_audio

  • JumpercollinsJumpercollins

    Brilliant update.

  • erosseross

    @BusMaxx said:
    Stormbeats Update is out.

    what is Stormbeats?

  • erosseross

    @eross said:

    @BusMaxx said:
    Stormbeats Update is out.

    what is Stormbeats?
    @eross said:

    @BusMaxx said:
    Stormbeats Update is out.

    what is Stormbeats?

    oh it’s a person not an app. lol

  • KmaticKmatic

    💥💥💥💥💥💥😎😎😎😎
    the koala becomes more and more perfect… .super elf !!!!!

  • erosseross

    note repeat!! this just ratcheted this app up even higher. so helpful

  • GravitasGravitas
    edited March 2022

    @elf_audio

    I’ve sent you a couple of pm’s, must’ve missed them in the post.

  • SimonSimon

    @eross said:
    what is Stormbeats?

    From the app store description:

    Version 1.4051

    This update is dedicated to STORMBEATS!

    • Note repeat keyboard with modulatable pitch or volume (and a free unsynced mode)

    • Mute/Solo (enable in extras)

    • Can now map most sample controls (e.g. sample start/length, attack, release tone etc)

    • Keyboard now supports velocity on the Y axis

    • piano roll is fullscreen giving you a bit more space

    • record latch so you can swipe up on a pad to lock it to record as a toggle

    • Many many fixes and tweaks

  • Lil_Stu07Lil_Stu07

    Straight 🔥🔥🔥 I was looking for a purchase button but seems these are baked in! 🤩

  • db909db909

    Holy shit the note repeat with pitch and being able to snap or not snap. This thing just blew a lot of things out of the water

  • FingolfinzzFingolfinzz

    Fantastic update

  • gusgranitegusgranite
    edited March 2022

    @stormbeats lol I remember you just bum rushing the feature requests on another app. GR-16 maybe? Great to see you giving your feedback on Koala 👍

    Nice work @elf_audio - the beat goes on 👊

Sign In or Register to comment.

© Vanilla Keystone Theme 2024