Loopy Pro: Create music, your way.

What is Loopy Pro? — Loopy Pro is a powerful, flexible, and intuitive live looper, sampler, clip launcher and DAW for iPhone and iPad. At its core, it allows you to record and layer sounds in real-time to create complex musical arrangements. But it doesn’t stop there—Loopy Pro offers advanced tools to customize your workflow, build dynamic performance setups, and create a seamless connection between instruments, effects, and external gear.

Use it for live looping, sequencing, arranging, mixing, and much more. Whether you're a live performer, a producer, or just experimenting with sound, Loopy Pro helps you take control of your creative process.

Download on the App Store

Loopy Pro is your all-in-one musical toolkit. Try it for free today.

NOW AVAILABLE (FREE) Make songs in AUM with scenes & automation. Control 1000 params 4 knobs

13

Comments

  • cazelcazel

    :o :o :o :o :'( :'( :'( :'(

  • PoppadocrockPoppadocrock

    It is a beta version.

  • PoppadocrockPoppadocrock

    @soundtemple said:
    Thanks for the feedback....

    ---- UPDATE ---
    So, I propose the following plan:

    • I will make a short intro video on each device explaining how to use it
    • I will make a setup tutorial explaining how to make all the connections required
    • I will make a AUM session template with all connections setup but no 3rd party apps except Mozaic so it will be usable if you have AUM and Mozaic without having to do setup
    • I will make the it available to the community in some kind of demo/beta/tryb4buy/donationware format so people can see if it is useful.

    I hope to complete the above over the next week.

    In the meantime for the technical readers I offer you QuantumKomposer Documentation

    Check out his comment from above...

  • onerezonerez

    @Poppadocrock said:
    It is a beta version.

    Sorry I missed it.... hope this turns out well.

  • PoppadocrockPoppadocrock

    No worries. I’m sure it will be available fairly soon, cheers.

  • ToastedghostToastedghost

    Damn I saw it this morning but was too busy to click... rats, silly me

  • GdubGdub

    Had a quick play with it earlier
    It’s good, only tried with the drums so far
    I like it but think it’s going to take sometime to get used to it
    A big thank you, and well done
    It’s well thought out, and has a lot of power
    Thanks again, it also shows the power of the amazing Mozaic , being able to arm mute and solo via the main controller etc are great

  • soundtemplesoundtemple

    @krassmann @_ki @steve99 @Tamir_Raz_Mataz @onerez @cazel @Poppadocrock @Toastedghost

    Apologies I thought 50 would be enough for a few weeks not a few hours. I made some more lol!

    2nd batch now available https://gumroad.com/l/quantumkomposer

    @Gdub Thanks for the feedback. Glad to hear you got it working. :)

  • Tamir_Raz_MatazTamir_Raz_Mataz

    @soundtemple said:
    @krassmann @_ki @steve99 @Tamir_Raz_Mataz @onerez @cazel @Poppadocrock @Toastedghost

    Apologies I thought 50 would be enough for a few weeks not a few hours. I made some more lol!

    2nd batch now available https://gumroad.com/l/quantumkomposer

    @Gdub Thanks for the feedback. Glad to hear you got it working. :)

    👊🦾

  • cazelcazel

    @soundtemple said:
    @krassmann @_ki @steve99 @Tamir_Raz_Mataz @onerez @cazel @Poppadocrock @Toastedghost

    Apologies I thought 50 would be enough for a few weeks not a few hours. I made some more lol!

    2nd batch now available https://gumroad.com/l/quantumkomposer

    @Gdub Thanks for the feedback. Glad to hear you got it working. :)

    thanks a lot!! 🙌🏿🙌🏿 super excited about this 🙆🏽‍♀️

  • PoppadocrockPoppadocrock

    @soundtemple said:
    @krassmann @_ki @steve99 @Tamir_Raz_Mataz @onerez @cazel @Poppadocrock @Toastedghost

    Apologies I thought 50 would be enough for a few weeks not a few hours. I made some more lol!

    2nd batch now available https://gumroad.com/l/quantumkomposer

    @Gdub Thanks for the feedback. Glad to hear you got it working. :)

    Lol. Congratulations! I actually did get an original copy but thank you. I can see this being very useful after just getting started with Ruismaker, just like in the video tutorials, it’s honestly quite brilliant. It is something that will take some time to get my head around, because of everything going on. Thanks for putting out the tutorials and documentation as well, I believe I’d be quite lost without that info. I’m going have to watch all your tutorials and take the time to unpack this monster. It uses and connects like 10-11 instances of Mozaic in AUM to make up this amazing monster midi groove box type thing. Each instance is a different part of basically everything you need in a session, all your synth sequencing, drum sequencing, automation, it generates notes, Etc... on and on. Regardless of what happens with this patch, you’ve achieved something pretty special just by creating it. I believe this patch will make @brambos quite proud. Well done.

  • PoppadocrockPoppadocrock

    @Gdub said:
    Had a quick play with it earlier
    It’s good, only tried with the drums so far
    I like it but think it’s going to take sometime to get used to it
    A big thank you, and well done
    It’s well thought out, and has a lot of power
    Thanks again, it also shows the power of the amazing Mozaic , being able to arm mute and solo via the main controller etc are great

    very true.

    Mozaic is an amazing app.

  • soundtemplesoundtemple

    thanks @Poppadocrock - I hope you can make some good use of it

  • PoppadocrockPoppadocrock

    @soundtemple said:
    thanks @Poppadocrock - I hope you can make some good use of it

    I intend to. You’re welcome.

  • enkayteeenkaytee

    @soundtemple - thanks a million for this. Have to admit I was a little confused after watching the intro video but the tutorials are great and it's starting to make a lot more sense...I'm liking it a lot...👍

  • soundtemplesoundtemple

    @enkaytee pleasure. yeah I guess thats why I made the vids, there's a lot of parts. Hopefully it all makes sense and you can have some fun with it.

  • ToastedghostToastedghost

    @Gavinski said:

    @krassmann said:
    Upfront I must say that probably I do not yet fully understand what QK can do and how to work with it but I want to tell you my impression. I think think you pushed Mozaic to the limits. With all respect for Mozaic but for me it feels like building a washing machine with Lego. Probably you should find an app developer to collaborate with and make a real app out of your idea. I think it deserves it. Maybe it’s the app we are all waiting for.

    This 👆

    Now we all wait for your video where we can truly begin to understand this beast.😅

  • ToastedghostToastedghost

    I do not have Ruinsmaker for drums but I do have Digisticks and Drum computer. How do I config Digisticks to work properly, right now I get a snare firing instead of a bass drum. Irealise that the sanre is possible one note above the bass. It is a shame that you only have choice of Chromatic, Ruinsmaker, or kit. I presume I should use kick in this instance. Any help would be cool, thanks.

  • CarnbotCarnbot
    edited January 2021

    @soundtemple said:
    This is really rather marvellous work :)
    I've been checking out Autom, notes, beats and Kntrl so far and it's very effective.

    Is it possible to add multiple instances of eg the Autom? I tried doing this and then using the same routing and channel but it didn't seem to work when playing back, I couldn't find the line of code to allow this yet, unless it's not possible easily.
    My goal is to have an Autom instance as an external midi clip trigger device for triggering LK midi clips or external AU sequencers etc, which I think would work quite well on my initial test. :)

  • soundtemplesoundtemple

    @Toastedghost Three ways you can do it. When choosing a note set there are 3 options.

    1. In chromatic mode BEATS can send any note per step.
      Go to the edit page
      Change Knob2 to Note
      Use Knob3 to set the desired note for that step
      Use the <> knob if you want to change the note for all steps. Hold the knob right or left until notes start changing. Bring it back to centre when done.

    2. In FIXED mode (where you see Ruismaker) you can turn another knob to change the FIXED mapping. There is a mapping for Drum Computer but not Digistix. Keep in mind the Drum Computer can set its own mapping. I used C, F#, C, F#, C, F#, C, F# so you will need to setup your Drum Computer to receive the same.

    3. In KIT mode you can configure a single note to be sent on each channel. So choose the note you need for CH's1-4 Kick, Snare, Hat, Perc etc.

  • soundtemplesoundtemple

    @Carnbot yes you can but its not only the routing to the instruments. You need to route MIDI from KNTRL to AUTOM on CH16.
    Make sure you hit update scenes in KNTRL so your new instance has scene info. With no scenes setup in AUTOM it does nothing.

  • ToastedghostToastedghost

    @soundtemple said:
    @Toastedghost Three ways you can do it. When choosing a note set there are 3 options.

    1. In chromatic mode BEATS can send any note per step.
      Go to the edit page
      Change Knob2 to Note
      Use Knob3 to set the desired note for that step
      Use the <> knob if you want to change the note for all steps. Hold the knob right or left until notes start changing. Bring it back to centre when done.

    2. In FIXED mode (where you see Ruismaker) you can turn another knob to change the FIXED mapping. There is a mapping for Drum Computer but not Digistix. Keep in mind the Drum Computer can set its own mapping. I used C, F#, C, F#, C, F#, C, F# so you will need to setup your Drum Computer to receive the same.

    3. In KIT mode you can configure a single note to be sent on each channel. So choose the note you need for CH's1-4 Kick, Snare, Hat, Perc etc.

    Brilliant, many thanks

  • onerezonerez

    @soundtemple said:
    @Carnbot yes you can but its not only the routing to the instruments. You need to route MIDI from KNTRL to AUTOM on CH16.
    Make sure you hit update scenes in KNTRL so your new instance has scene info. With no scenes setup in AUTOM it does nothing.

    I am looking to do the same.... sorry have not tried it yet, but the multiple of AUTOM need to be on ch16... when routing from KNTRL.... will this cause issues?

  • soundtemplesoundtemple


    @Toastedghost In this pic you can see how I have my Drum Computer mapping and the Noteset settings in BEATS

  • soundtemplesoundtemple

    @onerez KNTRL sends midi to all the QK devices on CH16 to sync the scenes. Without this AUTOM wont be in sync with the other devices.

    @Carnbot AUTOM sends midi CC. To trigger clips maybe you need notes? If so, then maybe use BEATS or NOTES for that.

  • CarnbotCarnbot
    edited January 2021

    @soundtemple said:
    @Carnbot yes you can but its not only the routing to the instruments. You need to route MIDI from KNTRL to AUTOM on CH16.
    Make sure you hit update scenes in KNTRL so your new instance has scene info. With no scenes setup in AUTOM it does nothing.

    Ah great, I didn't update scenes, will try that thanks!

    @soundtemple said:

    @Carnbot AUTOM sends midi CC. To trigger clips maybe you need notes? If so, then maybe use BEATS or NOTES for that.

    And yes BEATS/NOTES would work too, but I find with AUTOM it's already set up to be easy to change the labels to Clip and scenes names etc so can make a nicely editable clip sequencer. :)

  • PoppadocrockPoppadocrock

    After I watched the first couple videos I must admit the word Masterpiece, crossed my mind. Then I started thinking I bet this took 8-10 months of work, and not much later in the video he says it took 7 months. This is something quite special @soundtemple Still digging in. Thank you.

  • PoppadocrockPoppadocrock

    @soundtemple I know you explained the setup a few posts ago, but an added Digistix mapping would be a good addition, maybe even DM1 & 2, elastic drums, fractal bits, etc...

  • Tamir_Raz_MatazTamir_Raz_Mataz

    @Poppadocrock said:
    @soundtemple I know you explained the setup a few posts ago, but an added Digistix mapping would be a good addition, maybe even DM1 & 2, elastic drums, fractal bits, etc...

    I agree also GR16 Drambo and Eg Pulse. Also to be able to use some Rozeta sequencers.

  • soundtemplesoundtemple

    @Poppadocrock Thanks. Living in Melbourne we were subject to a 5 month COVID lockdown during 2020. Curfews, limited contact with others, no restaurants, bars etc. I think it became my COVID crutch. I found myself waking super early and doing 2-3hrs before work and bigger sessions on the weekends.

    I dont own those other drum machines. By mapping do you mean a midi mapping in KNTRL or the noteset mapping in BEATS or both?

    If you send me the notes you want for the Noteset mapping in BEATS I can probably add those easily enough.

    For the midi mappings, you can make them yourself in KNTRL.
    1. Turn <= EDIT => mode ON for ALL CHANNELS
    2. Pick an instrument channel and set the Layout to FREE
    3. Turn <= EDIT => mode OFF for ALL CHANNELS
    4. Unlock INST LAYOUTS (so padlock is gone)
    5. Go into that channel and on the 4 pages you can tap a pad to select
    6. Tapping again toggles between [CC val, min, max] and [label, color, page]
    7. Make your mapping by setting labels* and CC's and colors for each pad
    8. Then you can save the Mozaic Preset using Mozaic's save button
    9. Lock INST LAYOUTS again so you dont accidentally stuff your mapping up while you use it.

    OR.... If you are feeling adventurous. Hit shift to go back to settings and hit LOG PRESET
    1. Hit Mozaic LOG buttons to see the preset code printed
    2. Search for the name of a template you dont need eg Redshrike
    3. Change Redshrike text to "Your Preset Name"
    4. Paste the code that got printed in the Log

    It looks something like this....

    ********* START PRESET *********
LabelKnob 3, "PRESET NAME"
def_labels[16*0] = [-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1]
def_colors[16*0] = [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
def_vals[16*0]   = [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
def_ccs[16*0]    = [30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45]
def_mins[16*0]   = [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
def_maxs[16*0]   = [127,127,127,127,127,127,127,127,127,127,127,127,127,127,127,127]
********** END PRESET **********

    There is a 3000 line limit in Mozaic scripts and all the scripts pretty much max out the line limit and funciton limit, so there is serious limitations to adding extra stuff.

    If you are planning on editing the code I would recommend getting a text editor eg: Textastic and installing @_ki's language support
    https://patchstorage.com/mozaic-language-support-for-code-text-editors/

    @Tamir_Raz_Mataz There is a noteset mapping for EG Pulse

Sign In or Register to comment.

© Vanilla Keystone Theme 2025