Loopy Pro: Create music, your way.
What is Loopy Pro? — Loopy Pro is a powerful, flexible, and intuitive live looper, sampler, clip launcher and DAW for iPhone and iPad. At its core, it allows you to record and layer sounds in real-time to create complex musical arrangements. But it doesn’t stop there—Loopy Pro offers advanced tools to customize your workflow, build dynamic performance setups, and create a seamless connection between instruments, effects, and external gear.
Use it for live looping, sequencing, arranging, mixing, and much more. Whether you're a live performer, a producer, or just experimenting with sound, Loopy Pro helps you take control of your creative process.
Download on the App StoreLoopy Pro is your all-in-one musical toolkit. Try it for free today.
Comments
You mean the vertical sliding controllers on the top control row? That's a good question.
Just the buttons to change the presets 1 to 512 or somethings...
Program Change. However in MIDI there are only 127 programs/bank, so it's best to use the curated setlists and NOT All Presets which is just a pool of all the presets.
Wait, I thought you are asking about the preset flipper.
Are you talking about all the controls on the control surface. They are all mapped to MIDI. If you want to see the MIDI Mapping for any particular control go to "Menu> Control Surface" Select a control and tap on MIDI.
Thank you. Yes I was talking about the flipper to browse the presets to go to preset 1 to 2 to 3 etc.
Does not seems to work.
I tried to midi map a knob on my Novation Launch Control to control the volume in GS.
Control Surface, double click on volume.
Click on midi. Click learn. Turn the knob on my controller. Knob detected. Click back and close and now the knob does nothing.
Each time I turn my knob there is a green light in GS to let me know that GS has receive a midi signal, but the volume is not control by the knob.
@Montreal_Music have you tried saving the preset after you’ve done your changes? Works for me (using an LFO) only after I’ve saved.
It seems to work on 10% of the patchs, not sure why. I'm in Linnstrument Multi midi mode.
Not sure what to suggest… one for Pat ( @moForte ) I think?
I don't want to waste your time, factors can be multiples, I will continue to investiguate on my side. It's weird because sometimes it works so I guess that I understand how to do it but not on every patch.
I click learn to midi map my knob, turn the knob, Geoshred snap recognize the knob and tell me it's like cc87. I unclick learn, close the tab, save the preset, turn the knob and nothing happen.
Montreal Music,
I see the source of the problem. There is a fence post error triggered by the use of MIDI Learn. This video shows the problem and how to work around it. We will fix it in the next bug fix release.
https://www.dropbox.com/s/9mtd8dxdnkym00l/MIDI Learn-Program Change.mov?dl=0
Not that we don't monitor the Audio Bus Forum every day. If you really need help it's best to reach out to [email protected] (the support email listed for GeoShred in the App Store). Or even better go to "Menu> Help> Report a Problem ... ".
If you reach out to us I usually respond within a few minutes during working hours.
Thanks,
Pat Scandalis
CEO/CTO moForte Inc, the creator of GeoShred.
Thank you Pat, that's awesome! Do you know when the new version will be uploaded in the AppStore?
We do regular bug fix releases. We just did one yesterday. I'm not sure when we will do the next one. Nick and I need to discuss internally. The source of the fence post error seems to be opening the control surface editor and using MIDI Learn. In the mean time there is the workaround shown in the video: switch the MIDI configuration to None/LinnStrument Multi 2 times.
-pat
Montreal Music, further investigation. You do not need to do that flipping between MIDI configurations. A simple save of the preset after a learn will address the problem. The bug is that the preset is not being "dirtied" (text goes from white to red) when a MIDI mapping is made. We will fix that, but I think in the mean time just saving your preset after a learn will do the trick.
-pat
Other question.
I'm on a patch of a Swam instruments and I have set my Linnstrument the way I like and each time every 10 sec I have a popup saying: "Presets using GeoSWAM instruments can be performed from the ...."
Each time I click OK and the popup comeback 10 sec laters. Is there a way to play the patch the way I want without this popup showing each 10 sec?
Thanks
That looks like the message you get if you’re controller is sending on channel 1. The GeoSWAM instruments need to be receiving on channel 2 or above
Same problem on channel 2 or 3 or 4.
Maybe a dumb question that’s been answered somewhere in the thread but is there a difference between Geoshred Play and Control once you’ve bought the full unlock? I got the paid upgrade within Play so I feel like control is just taking up an extra 500mb on my storage unless it has extra MIDI capability that Play doesn’t?
I think the problem was that I were on Midi Mode "chan per note".
By switching the midi mode to "One chan", I think I solved the problem.
Control without the unlock is just a midi controller
I don't know about the Play + Unlock, but I have the Control + Unlock Pro Features and it's the same as Geoshred Pro.
Play + unlock is the same as Geoshred Pro as well. So I’m guessing it has all the same features as Play. The only difference is the interface for play has a couple of midi CC sliders by default, but I’m sure they can be assigned in Play as they both do function as AU midi controllers. I just wanted to make sure play+ doesn’t have any less features than control
Geoshred Play + Unlock = Geoshred Control + Unlock = Geoshred Pro
Hi Pat @moForte - may I ask about preset search function which as of last year was supposed to arrive mid-term? Is it coming along?
Geoshred appears to forget the selected preset when used in Logic Pro for iPad, resetting to the first one in the list every time I reopen the project, which is a stark reminder for the need of a proper search function. I mean, there's only so many times you want to hear your subtle tenor Sax solo shredded instead when you click play*
(*About half the time the geoshred track produces no sound at all after reopening the Logic project BTW, which might be related - or another thing to look at?)
Thanks! Looks like I can clear some space on my iPad then haha
I recently saw a 20% OFF for the Swam bundle in Geoshred if you own a Linnstrument. I own a Linnstrument, but I already have 2 Swam. The code will not work on individual purshase inside Geoshred I guess? Violon and Flute would be a good addition to my collection.
The best is to go for Geoshred Pro unless you got Swam instruments and use Geoshred play just to control them inside a Daw …
With Geoshred Pro I got many instruments inside mainly indians instruments and you got swam Geoshred instruments IAP each less expensive around $17 if I remember , I bought the sax tenor. The IAP can only be play inside Geoshred. But far less expensive.
Geoshred Play + the unlock is the same as Geoshred Pro, so we have the same thing. I agree though, it’s excellent. I use it more for midi than anything else but the built in sounds are great too.
The GeoSWAM instruments are designed to work with MPE. The message that you are getting means that you are sending notes on Channel 1 which is the MPE Manager Channel and not for notes. Roger has a one button setup to put your controller into MPE mode. It's shown here in this application note video at 2:02:
Note that I only check the Audio Bus forum once a week. If you reach out to us directly I usually respond in a few hours. [email protected] or in GeoShred "Menu> Help> Report a Problem".
GeoShred Play+Pro (Blue Icon), GeoShred Control+Pro (Orange Icon) and GeoShred Pro (Green Icon) are identical. Apple does not allow developers to convert one app to another. What the Pro upgrades do, is turn on all the Pro features.
If you have Play+Pro you do not need Control. Further it's not a good ideal to have more than one GeoShred on your device because they all share the same Auv3 PluginID to assist with migrating DAW projects from one GeoShred to another.
Here is a table comparing all the GeoShreds (Page 2)
https://www.moforte.com/wp-content/uploads/2022/04/GeoShred-5-one-sheet.pdf
Ervin, We have heard about this problem reported, but have never been able to reproduce it. Can you assist us with tracking down a reproducible use case?
Search will be part of a total re-write of preset management. We do not have a time frame yet for that but it's a big project.