Help understanding bus sends in AUM

pejman

@espiegel123

❤️❤️❤️❤️ Thank you to my dear and kind teacher ❤️❤️❤️❤️ espiegel123.

uncledave

@pejman said:

@uncledave said:
@pejman . I believe AUM doesn't implement this. When a MIDI effect is bypassed, it is simply turned off. The AUM routing matrix shows the connections to it are broken, see pic. This is different from bypassing an audio effect, where the audio stream is just passed around the bypassed effect.

Could you use two dummy MIDI effects, like the free StreamByter, which passes all its inputs to its output? Route your MIDI effect output through one, the unaffected MIDI through the other, and send both their outputs to the destination. Bypass one StreamByter or the other to switch between MIDI streams.

That’s working, 👍 🙏❤️.

Great. Just for completeness, here's my example. Using the AUM keyboard as input, StreamByter (Multi) as the effect, and Dagger as the synth. The left pic shows Multi enabled, the right pic shows Multi bypassed, and the dummy StreamByter enabled to maintain MIDI continuity. You could use a MIDI controller (button) to alternately enable either path.

pejman

@uncledave , thanks for explanation and screenshots ❤️❤️

Yes I did this method you said.

You wrote: You could use a MIDI controller (button) to alternately enable either path.

Very good idea, thank you.👍

pejman

@espiegel123 , @uncledave

Hi again.

I have problem with show plugin via one keyboard note ( for example note c-1 ) to multiple nodes for example 3 nodes wich i assigned to them .

When i press C note , all of plugins windows appear well, but when i press same note C again , for closing windows, one of the 3 windows , remains and does not close. In case I expect all three windows to be closed together.

How to solve this problem?

espiegel123

@pejman said:
@espiegel123 , @uncledave

Hi again.

I have problem with show plugin via one keyboard note ( for example note c-1 ) to multiple nodes for example 3 nodes wich i assigned to them .

When i press C note , all of plugins windows appear well, but when i press same note C again , for closing windows, one of the 3 windows , remains and does not close. In case I expect all three windows to be closed together.

How to solve this problem?

If you encounter a bug, report it to the developer. Is the a particular AU whose window doesn’t close? Does it close if it is the only node targeted?

pejman

@espiegel123

@espiegel123 said:

@pejman said:
@espiegel123 , @uncledave

Hi again.

I have problem with show plugin via one keyboard note ( for example note c-1 ) to multiple nodes for example 3 nodes wich i assigned to them .

When i press C note , all of plugins windows appear well, but when i press same note C again , for closing windows, one of the 3 windows , remains and does not close. In case I expect all three windows to be closed together.

How to solve this problem?

If you encounter a bug, report it to the developer. Is the a particular AU whose window doesn’t close? Does it close if it is the only node targeted?

No there are 2 mozaic ( M 5 and M5 and one ( KB1 keyboard suite) in M 1.

You wrote: Does it close if it is the only node targeted?

🔺Yes, it close.

pejman

@espiegel123

Mozaic M5 after one time opening, It no longer closes. Only its toolbar will be momentary highlighted.

uncledave

Is the Mozaic M5 window possibly running continuously, maybe from a sequencer, or from a delay inside Mozaic?

pejman

@uncledave

@uncledave said:
Is the Mozaic M5 window possibly running continuously, maybe from a sequencer, or from a delay inside Mozaic?

No.

I unassigned one of the mozaic M5 , but this time with first Pressing note c , both mozaic m5 and kb1 appear , but with press note 2 for second time , kb1 close but mozaic m5 remain, and By pressing the note 2 for the third time, mozaic m5 appear and kb1 close like switching between kb1 and mozaic .

I try with 2 another plugins: suggester and midi tools , Exactly the same thing happens to them, that is, switching between them.

espiegel123

@pejman said:
@uncledave

@uncledave said:
Is the Mozaic M5 window possibly running continuously, maybe from a sequencer, or from a delay inside Mozaic?

No.

I unassigned one of the mozaic M5 , but this time with first Pressing note c , both mozaic m5 and kb1 appear , but with press note 2 for second time , kb1 close but mozaic m5 remain, and By pressing the note 2 for the third time, mozaic m5 appear and kb1 close like switching between kb1 and mozaic .

I try with 2 another plugins: suggester and midi tools , Exactly the same thing happens to them, that is, switching between them.

It looks like AUM can only close the frontmost window. If you send the midi trigger while the window is in front, the window is closed. Otherwise it brings the window to the front.

pejman

@espiegel123

@espiegel123 said:

@pejman said:
@uncledave

@uncledave said:
Is the Mozaic M5 window possibly running continuously, maybe from a sequencer, or from a delay inside Mozaic?

No.

I unassigned one of the mozaic M5 , but this time with first Pressing note c , both mozaic m5 and kb1 appear , but with press note 2 for second time , kb1 close but mozaic m5 remain, and By pressing the note 2 for the third time, mozaic m5 appear and kb1 close like switching between kb1 and mozaic .

I try with 2 another plugins: suggester and midi tools , Exactly the same thing happens to them, that is, switching between them.

It looks like AUM can only close the frontmost window. If you send the midi trigger while the window is in front, the window is closed. Otherwise it brings the window to the front.

But in fact it should not be like that.

And I prefer to report this issue to the developer, but unfortunately there is no answer in my email. I also sent a message on audiobus private massage yesterday, but I have not received any answer so far. I hope developer will answer.

Is there any other way to contact them?