THE FREE SAMPLE FODDER THREAD

[Deleted User] · February 2018

The user and all related content has been deleted.

RedSkyLullaby · February 2018

@Redo1 said:
Has this already been posted OR does any one know where to get all the mc303 sounds? I want to try and load them on my circuit before I sell my mc303.

I could sample my mc303 myself but I don't know how to do this. Is it easy?

Yes, would be pretty easy to sample in to audiodhare or any daw in ipad through an audio interface. The recording part is easy as long as you make sure you have level set so you are not getting the signal to high and clipping, the cutting and editing to individual samples is the more time consuming bit but even that is pretty easy with audioshare. Audioshare also good for arranging your created samples in to categories/folders

[Deleted User] · February 2018

The user and all related content has been deleted.

[Deleted User] · February 2018

The user and all related content has been deleted.

RedSkyLullaby · February 2018

@Max23 said:

@RedSkyLullaby said:

@Redo1 said:
Has this already been posted OR does any one know where to get all the mc303 sounds? I want to try and load them on my circuit before I sell my mc303.

I could sample my mc303 myself but I don't know how to do this. Is it easy?

Yes, would be pretty easy to sample in to audiodhare or any daw in ipad through an audio interface. The recording part is easy as long as you make sure you have level set so you are not getting the signal to high and clipping, the cutting and editing to individual samples is the more time consuming bit but even that is pretty easy with audioshare. Audioshare also good for arranging your created samples in to categories/folders

do your self a favor and don't edit audio on the iPad
it will drive you nuts
things go so much faster with a mouse and keyboard shortcuts
I would still be editing the whole next week on iPad, on the laptop I did it in 2 days
besides I recommend a real audio editor audio share is much to simple

Sure is likely quicker and more accurate to edit w a mouse it is not huge amount more effort on iPad. Suppose depends on workflow you are used to. I did all the sound design and editing for this sample pack on iPad
http://99sounds.org/radiophonic-atmospheres/

anickt · February 2018

@RedSkyLullaby said:

@Max23 said:

@RedSkyLullaby said:

@Redo1 said:
Has this already been posted OR does any one know where to get all the mc303 sounds? I want to try and load them on my circuit before I sell my mc303.

I could sample my mc303 myself but I don't know how to do this. Is it easy?

Yes, would be pretty easy to sample in to audiodhare or any daw in ipad through an audio interface. The recording part is easy as long as you make sure you have level set so you are not getting the signal to high and clipping, the cutting and editing to individual samples is the more time consuming bit but even that is pretty easy with audioshare. Audioshare also good for arranging your created samples in to categories/folders

do your self a favor and don't edit audio on the iPad
it will drive you nuts
things go so much faster with a mouse and keyboard shortcuts
I would still be editing the whole next week on iPad, on the laptop I did it in 2 days
besides I recommend a real audio editor audio share is much to simple

Sure is likely quicker and more accurate to edit w a mouse it is not huge amount more effort on iPad. Suppose depends on workflow you are used to. I did all the sound design and editing for this sample pack on iPad
http://99sounds.org/radiophonic-atmospheres/

I would use Twisted Wave. What did you use @RedSkyLullaby ?

[Deleted User] · February 2018

The user and all related content has been deleted.

CracklePot · February 2018

@Max23 said:

@RedSkyLullaby said:

@Max23 said:

@RedSkyLullaby said:

@Redo1 said:
Has this already been posted OR does any one know where to get all the mc303 sounds? I want to try and load them on my circuit before I sell my mc303.

I could sample my mc303 myself but I don't know how to do this. Is it easy?

Yes, would be pretty easy to sample in to audiodhare or any daw in ipad through an audio interface. The recording part is easy as long as you make sure you have level set so you are not getting the signal to high and clipping, the cutting and editing to individual samples is the more time consuming bit but even that is pretty easy with audioshare. Audioshare also good for arranging your created samples in to categories/folders

do your self a favor and don't edit audio on the iPad
it will drive you nuts
things go so much faster with a mouse and keyboard shortcuts
I would still be editing the whole next week on iPad, on the laptop I did it in 2 days
besides I recommend a real audio editor audio share is much to simple

Sure is likely quicker and more accurate to edit w a mouse it is not huge amount more effort on iPad. Suppose depends on workflow you are used to. I did all the sound design and editing for this sample pack on iPad
http://99sounds.org/radiophonic-atmospheres/

I know it kind of works, I used to edit samples 20 years ago without any waveform display by ear and a numeric representation of the sample,
but this is a computer, I want microscopic sharp edits, you can't do those on an iPad because your fingers a blocking the view ...
just to select some section of audio on an iPad is driving me nuts, and there are no keyboard short cuts, it feels like back to the stone age ... and it takes forever, I simply don't want to work like that anymore, the day only has 24 h

Just 20 years ago? Are you sure it wasn’t more like 30 years ago? Even about 25 years ago I had Cool Edit on PC. That had sample level zoom and editing in the waveform display.

[Deleted User] · February 2018

The user and all related content has been deleted.

CracklePot · February 2018

@Max23 said:

@CracklePot said:

@Max23 said:

@RedSkyLullaby said:

@Max23 said:

@RedSkyLullaby said:

@Redo1 said:
Has this already been posted OR does any one know where to get all the mc303 sounds? I want to try and load them on my circuit before I sell my mc303.

I could sample my mc303 myself but I don't know how to do this. Is it easy?

Yes, would be pretty easy to sample in to audiodhare or any daw in ipad through an audio interface. The recording part is easy as long as you make sure you have level set so you are not getting the signal to high and clipping, the cutting and editing to individual samples is the more time consuming bit but even that is pretty easy with audioshare. Audioshare also good for arranging your created samples in to categories/folders

do your self a favor and don't edit audio on the iPad
it will drive you nuts
things go so much faster with a mouse and keyboard shortcuts
I would still be editing the whole next week on iPad, on the laptop I did it in 2 days
besides I recommend a real audio editor audio share is much to simple

Sure is likely quicker and more accurate to edit w a mouse it is not huge amount more effort on iPad. Suppose depends on workflow you are used to. I did all the sound design and editing for this sample pack on iPad
http://99sounds.org/radiophonic-atmospheres/

I know it kind of works, I used to edit samples 20 years ago without any waveform display by ear and a numeric representation of the sample,
but this is a computer, I want microscopic sharp edits, you can't do those on an iPad because your fingers a blocking the view ...
just to select some section of audio on an iPad is driving me nuts, and there are no keyboard short cuts, it feels like back to the stone age ... and it takes forever, I simply don't want to work like that anymore, the day only has 24 h

Just 20 years ago? Are you sure it wasn’t more like 30 years ago? Even about 25 years ago I had Cool Edit on PC. That had sample level zoom and editing in the waveform display.

I started using computers for audio 20 years ago, before that I only used hardware, then I went all software.
that was about the time when cpus got fast enough to do realtime audio

My computer back then was a 486 with 4 mb ram and a 160 mb hard drive, lol. But it was a trip that I could do any of the sampling, looping and processing back then. Before that I had only used 4-track cassette with guitar pedals for effects. Oh yeah, and that awesome RadioShack reverb, too.

[Deleted User] · February 2018

The user and all related content has been deleted.

knewspeak · February 2018

@Max23 said:
lol, yeah I had a lot of stomp boxes too, I found some old recordings I did on mini disc, anyone remember those? , lol, that ish is so noisy, I can't play that to anyone ^^

Just go old school 'tape, scissors, snip, snip, snip'

RedSkyLullaby · February 2018

@anickt said:

@RedSkyLullaby said:

@Max23 said:

@RedSkyLullaby said:

@Redo1 said:
Has this already been posted OR does any one know where to get all the mc303 sounds? I want to try and load them on my circuit before I sell my mc303.

I could sample my mc303 myself but I don't know how to do this. Is it easy?

Yes, would be pretty easy to sample in to audiodhare or any daw in ipad through an audio interface. The recording part is easy as long as you make sure you have level set so you are not getting the signal to high and clipping, the cutting and editing to individual samples is the more time consuming bit but even that is pretty easy with audioshare. Audioshare also good for arranging your created samples in to categories/folders

do your self a favor and don't edit audio on the iPad
it will drive you nuts
things go so much faster with a mouse and keyboard shortcuts
I would still be editing the whole next week on iPad, on the laptop I did it in 2 days
besides I recommend a real audio editor audio share is much to simple

Sure is likely quicker and more accurate to edit w a mouse it is not huge amount more effort on iPad. Suppose depends on workflow you are used to. I did all the sound design and editing for this sample pack on iPad
http://99sounds.org/radiophonic-atmospheres/

I would use Twisted Wave. What did you use @RedSkyLullaby ?

I used audioshare. Would prob do in twisted wave or Auria next time

anickt · February 2018

@RedSkyLullaby said:

@anickt said:

@RedSkyLullaby said:

@Max23 said:

@RedSkyLullaby said:

@Redo1 said:
Has this already been posted OR does any one know where to get all the mc303 sounds? I want to try and load them on my circuit before I sell my mc303.

I could sample my mc303 myself but I don't know how to do this. Is it easy?

Yes, would be pretty easy to sample in to audiodhare or any daw in ipad through an audio interface. The recording part is easy as long as you make sure you have level set so you are not getting the signal to high and clipping, the cutting and editing to individual samples is the more time consuming bit but even that is pretty easy with audioshare. Audioshare also good for arranging your created samples in to categories/folders

do your self a favor and don't edit audio on the iPad
it will drive you nuts
things go so much faster with a mouse and keyboard shortcuts
I would still be editing the whole next week on iPad, on the laptop I did it in 2 days
besides I recommend a real audio editor audio share is much to simple

Sure is likely quicker and more accurate to edit w a mouse it is not huge amount more effort on iPad. Suppose depends on workflow you are used to. I did all the sound design and editing for this sample pack on iPad
http://99sounds.org/radiophonic-atmospheres/

I would use Twisted Wave. What did you use @RedSkyLullaby ?

I used audioshare. Would prob do in twisted wave or Auria next time

Actually Caustic has very good editing tools but the file naming aspect can be a little weird. I have used it for the exact purpose of editing drum samples and it was fine. I wish it would get an update.

[Deleted User] · February 2018

The user and all related content has been deleted.

kobamoto · April 2018

classic... must sample

RedSkyLullaby · June 2018

A shed ton of Free ChipTune samples
http://rhythm-lab.com/chipshop-deluxe/

White · July 2018

“Free Dose” is a free sound pack available for free download on BangerLab site.

Free Dose contains over 220 Wav loops and over 50 MIDI files, including vocal samples, drum samples, synth loops, hi-hat loops, and more.

No registration or subscription is required on the download page.

https://bangerlab.com/product/free-dose-free-sample-pack

Telstar5 · July 2018

I can edit and trim samples pretty precisely on my Korg Kross 2 , not to mention an easy file and storage on SD card. Kinda glad I got it now .

gusgranite · July 2018

Thx @White

oat_phipps · July 2018

@Max23 said:
lol, yeah I had a lot of stomp boxes too, I found some old recordings I did on mini disc, anyone remember those? , lol, that ish is so noisy, I can't play that to anyone ^^

Mini-Disc!!! Hahaha I thought I was so cool when I got a cd/mini-disc stereo in jr. high school. My very first recordings were blink-182 covers played through a shitty AUX mic to blank minidisc.

gusgranite · July 2018

5 free iMPC Pro sample packs. http://blog.retronyms.com/2018/07/exclusive-deal-for-our-users.html

White · July 2018

@gusgranite said:
5 free iMPC Pro sample packs. http://blog.retronyms.com/2018/07/exclusive-deal-for-our-users.html

Thanks

Samu · July 2018

@gusgranite said:
5 free iMPC Pro sample packs. http://blog.retronyms.com/2018/07/exclusive-deal-for-our-users.html

Free is always good. Just waiting for the day when AudioCopy gets Files.app support
I mean iMPC Pro 2 already has rudimentary Files.app support (ie. visible in Files.app) so it's just a mater of time...