Loopy Pro: Create music, your way.

What is Loopy Pro? — Loopy Pro is a powerful, flexible, and intuitive live looper, sampler, clip launcher and DAW for iPhone and iPad. At its core, it allows you to record and layer sounds in real-time to create complex musical arrangements. But it doesn’t stop there—Loopy Pro offers advanced tools to customize your workflow, build dynamic performance setups, and create a seamless connection between instruments, effects, and external gear.

Use it for live looping, sequencing, arranging, mixing, and much more. Whether you're a live performer, a producer, or just experimenting with sound, Loopy Pro helps you take control of your creative process.

Download on the App Store

Loopy Pro is your all-in-one musical toolkit. Try it for free today.

New BM3 update coming in the next couple days.

124»

Comments

  • ExAsperis99ExAsperis99

    @gonekrazy3000 said:

    @Strizbiz said:

    @Samplemunch said:
    No need for the nastiness just because you dont know Beatmaker very well, I was only trying to put the correct information in the thread.
    Each bank has a single and multi channel mode, so MIDI notes can trigger pads in a bank or a MIDI channel can send all its notes to one pad.

    Focus action editor is for what is in focus, it is even implied in the name.

    I dont know it well??? Apparently you dont nor understand what I said....even after I showed you in a video...smh lol....the beatstep can send midi to one channel at a time, you cant assign a separate midi output from each pad, and it doesnt matter if a window is in focus once I set up Beatstep to trigger separate BM3 pads, I can trigger sounds not matter what window is in focus. Feel free to share a video.

    I think you have not really looked at the midi editor recently. You can infact assign a separate midi channel per drum pad since firmware 2.0. I use this to directly control the volca sample with drum pads 1-10 sending on channels 1-10 and sequencer 1 and 2 sending on 11 and 12. Drum pads 11-16 send on channel 13.

    The firmware update notes are here:-
    https://www.arturia.com/beatstep-pro-firmware-update-2
    You will find the relevant information on assigning different channels per drum pad under the "volca compatibility" section.

    [drops mic]

  • zhoezhoe

    @ToMess said:

    @Goozoon said:
    I wish they make bm3 controller, something like akai mpc studio black

    Yes. I would sell my mpc for it if it were more than just a basic pad controller

    They could make something similar to iRig Pads controller plus a little display.

  • mireko_2mireko_2

    @zhoe said:

    @Goozoon said:
    I wish they make bm3 controller, something like akai mpc studio black

    I agree. I’d back them if they decide to kickstarter the idea

    What about Maschine MK1?
    It is fully programmable using the Maschine Editor.

    For example Fxpansion Geist has a custom mapping file in their support downloads that completely reprograms the Maschine Mk1&2 to work with Geist, even the screens show Geist controls on the Maschine

  • StrizbizStrizbiz

    @gonekrazy3000 said:

    @Strizbiz said:

    @Samplemunch said:
    No need for the nastiness just because you dont know Beatmaker very well, I was only trying to put the correct information in the thread.
    Each bank has a single and multi channel mode, so MIDI notes can trigger pads in a bank or a MIDI channel can send all its notes to one pad.

    Focus action editor is for what is in focus, it is even implied in the name.

    I dont know it well??? Apparently you dont nor understand what I said....even after I showed you in a video...smh lol....the beatstep can send midi to one channel at a time, you cant assign a separate midi output from each pad, and it doesnt matter if a window is in focus once I set up Beatstep to trigger separate BM3 pads, I can trigger sounds not matter what window is in focus. Feel free to share a video.

    I think you have not really looked at the midi editor recently. You can infact assign a separate midi channel per drum pad since firmware 2.0. I use this to directly control the volca sample with drum pads 1-10 sending on channels 1-10 and sequencer 1 and 2 sending on 11 and 12. Drum pads 11-16 send on channel 13.

    The firmware update notes are here:-
    https://www.arturia.com/beatstep-pro-firmware-update-2
    You will find the relevant information on assigning different channels per drum pad under the "volca compatibility" section.

    lol, that would be awesome if I had a Beatstep " pro"......... but Im not using the pro.... soooooo...no.... I havent looked at the midi editor for the pro, lol

  • StrizbizStrizbiz

    @ExAsperis99 said:

    @gonekrazy3000 said:

    @Strizbiz said:

    @Samplemunch said:
    No need for the nastiness just because you dont know Beatmaker very well, I was only trying to put the correct information in the thread.
    Each bank has a single and multi channel mode, so MIDI notes can trigger pads in a bank or a MIDI channel can send all its notes to one pad.

    Focus action editor is for what is in focus, it is even implied in the name.

    I dont know it well??? Apparently you dont nor understand what I said....even after I showed you in a video...smh lol....the beatstep can send midi to one channel at a time, you cant assign a separate midi output from each pad, and it doesnt matter if a window is in focus once I set up Beatstep to trigger separate BM3 pads, I can trigger sounds not matter what window is in focus. Feel free to share a video.

    I think you have not really looked at the midi editor recently. You can infact assign a separate midi channel per drum pad since firmware 2.0. I use this to directly control the volca sample with drum pads 1-10 sending on channels 1-10 and sequencer 1 and 2 sending on 11 and 12. Drum pads 11-16 send on channel 13.

    The firmware update notes are here:-
    https://www.arturia.com/beatstep-pro-firmware-update-2
    You will find the relevant information on assigning different channels per drum pad under the "volca compatibility" section.

    [drops mic]

    lol...oops....you dropped the mic.... I dont have the pro version :)

  • SamplemunchSamplemunch

    You dont need a separate MIDI channel per drum pad, Beatmaker will work either way, it has multi and single mode per bank, Strizbiz would just rather be nasty than actually go and look at bank MIDI settings.

  • StrizbizStrizbiz

    @gonekrazy3000 said:

    @Strizbiz said:

    @Samplemunch said:
    No need for the nastiness just because you dont know Beatmaker very well, I was only trying to put the correct information in the thread.
    Each bank has a single and multi channel mode, so MIDI notes can trigger pads in a bank or a MIDI channel can send all its notes to one pad.

    Focus action editor is for what is in focus, it is even implied in the name.

    I dont know it well??? Apparently you dont nor understand what I said....even after I showed you in a video...smh lol....the beatstep can send midi to one channel at a time, you cant assign a separate midi output from each pad, and it doesnt matter if a window is in focus once I set up Beatstep to trigger separate BM3 pads, I can trigger sounds not matter what window is in focus. Feel free to share a video.

    I think you have not really looked at the midi editor recently. You can infact assign a separate midi channel per drum pad since firmware 2.0. I use this to directly control the volca sample with drum pads 1-10 sending on channels 1-10 and sequencer 1 and 2 sending on 11 and 12. Drum pads 11-16 send on channel 13.

    The firmware update notes are here:-
    https://www.arturia.com/beatstep-pro-firmware-update-2
    You will find the relevant information on assigning different channels per drum pad under the "volca compatibility" section.

    I didnt have a look at the link, good to know if I decide to upgrade to the pro, but my point was that I can use the focus actions window to assign the non pro beatstep to trigger separate BM3 pads, and that way It just works across all banks I load.

  • StrizbizStrizbiz

    @Samplemunch said:
    You dont need a separate MIDI channel per drum pad, Beatmaker will work either way, it has multi and single mode per bank, Strizbiz would just rather be nasty than actually go and look at bank MIDI settings.

    bro...I looked at it....and we are talking about 2 completely different things..... I dont know how you cant see that????
    So instead of using the focus editor to assign my controller to trigger separate pads in each banks.... and have it work for all my banks with out doing anything else....are you suggesting that instead I go and edit ALL my banks....one by one? You dont know what youre talking about....smh

  • SamplemunchSamplemunch
    edited December 2017

    No, now you are changing what you originally said, you stated that the focus editor HAD to be used to setup to trigger pads...

    @Strizbiz said:

    @Fruitbat1919 said:
    I’m still unable to send midi to multiple pads of a drum kit. Have tried everything people have suggested but no joy :(

    If you mean when using a midi controller you have to set it up in this window

    That is not true, i pointed this out and said the focus editor was for focus, you then went on and on about not sending multiple channels, which again was not needed because of single and multi mode, and now when you finally realize you were wrong, you say that you need it across multiple banks IE focus, which had nothing at all to do with the bad information you originally posted, but actually confirms what i said, the focus window is for setting up using focus.

    You are an extremely nasty person who hides behinds LOLs, your information was incorrect and anybody can check that in the Beatmaker manual, I wont reply to you again but suggest others should take your Beatmaker advice with a pinch of salt.

  • StrizbizStrizbiz

    @Samplemunch said:
    No, now you are changing what you originally said, you stated that the focus editor HAD to be used to setup to trigger pads...

    @Strizbiz said:

    @Fruitbat1919 said:
    I’m still unable to send midi to multiple pads of a drum kit. Have tried everything people have suggested but no joy :(

    If you mean when using a midi controller you have to set it up in this window

    That is not true, i pointed this out and said the focus editor was for focus, you then went on and on about not sending multiple channels, which again was not needed because of single and multi mode, and now when you finally realize you were wrong, you say that you need it across multiple banks IE focus, which had nothing at all to do with the bad information you originally posted, but actually confirms what i said, the focus window is for setting up using focus.

    You are an extremely nasty person who hides behinds LOLs, your information was incorrect and anybody can check that in the Beatmaker manual, I wont reply to you again but suggest others should take your Beatmaker advice with a pinch of salt.

    I suggest you go back and read the original comment I replied to and read my reply before you decided to jump in head first and say I was wrong which was "I’m still unable to send midi to multiple pads of a drum kit. Have tried everything people have suggested but no joy :(" Now is it possible we interpreted what he's trying to accomplish in different ways? Possibly, I took it as wanting to have separate sounds mapped across a midi controller, which I accomplish by using the focus actions editor.... If he said he wanted to play 2 synths at the same time, then I would have suggested using the midi editor, unlike you, I dont have a bruised ego, and I even sent you a link to demonstrate what I was talking about.

    https://intua.zendesk.com/hc/en-us/articles/210181406-Using-external-MIDI-controllers-and-instruments

  • LeonLeroyLeonLeroy

    great update. shitty “conversation”.

  • reziduerezidue

    @Strizbiz said:

    @Samplemunch said:
    No, now you are changing what you originally said, you stated that the focus editor HAD to be used to setup to trigger pads...

    @Strizbiz said:

    @Fruitbat1919 said:
    I’m still unable to send midi to multiple pads of a drum kit. Have tried everything people have suggested but no joy :(

    If you mean when using a midi controller you have to set it up in this window

    That is not true, i pointed this out and said the focus editor was for focus, you then went on and on about not sending multiple channels, which again was not needed because of single and multi mode, and now when you finally realize you were wrong, you say that you need it across multiple banks IE focus, which had nothing at all to do with the bad information you originally posted, but actually confirms what i said, the focus window is for setting up using focus.

    You are an extremely nasty person who hides behinds LOLs, your information was incorrect and anybody can check that in the Beatmaker manual, I wont reply to you again but suggest others should take your Beatmaker advice with a pinch of salt.

    I suggest you go back and read the original comment I replied to and read my reply before you decided to jump in head first and say I was wrong which was "I’m still unable to send midi to multiple pads of a drum kit. Have tried everything people have suggested but no joy :(" Now is it possible we interpreted what he's trying to accomplish in different ways? Possibly, I took it as wanting to have separate sounds mapped across a midi controller, which I accomplish by using the focus actions editor.... If he said he wanted to play 2 synths at the same time, then I would have suggested using the midi editor, unlike you, I dont have a bruised ego, and I even sent you a link to demonstrate what I was talking about.

    https://intua.zendesk.com/hc/en-us/articles/210181406-Using-external-MIDI-controllers-and-instruments

    Are you arguing with another guy about how their instructions don’t help you for your device while giving another guy instructions that are specific to your controller? I haven’t even seen the original guy comment to your bickering and you’ve been pretty negative throughout. You talked about not having a bruised ego but you were immediately offended that someone implied you could be wrong in what you said.

  • StrizbizStrizbiz

    @rezidue said:

    @Strizbiz said:

    @Samplemunch said:
    No, now you are changing what you originally said, you stated that the focus editor HAD to be used to setup to trigger pads...

    @Strizbiz said:

    @Fruitbat1919 said:
    I’m still unable to send midi to multiple pads of a drum kit. Have tried everything people have suggested but no joy :(

    If you mean when using a midi controller you have to set it up in this window

    That is not true, i pointed this out and said the focus editor was for focus, you then went on and on about not sending multiple channels, which again was not needed because of single and multi mode, and now when you finally realize you were wrong, you say that you need it across multiple banks IE focus, which had nothing at all to do with the bad information you originally posted, but actually confirms what i said, the focus window is for setting up using focus.

    You are an extremely nasty person who hides behinds LOLs, your information was incorrect and anybody can check that in the Beatmaker manual, I wont reply to you again but suggest others should take your Beatmaker advice with a pinch of salt.

    I suggest you go back and read the original comment I replied to and read my reply before you decided to jump in head first and say I was wrong which was "I’m still unable to send midi to multiple pads of a drum kit. Have tried everything people have suggested but no joy :(" Now is it possible we interpreted what he's trying to accomplish in different ways? Possibly, I took it as wanting to have separate sounds mapped across a midi controller, which I accomplish by using the focus actions editor.... If he said he wanted to play 2 synths at the same time, then I would have suggested using the midi editor, unlike you, I dont have a bruised ego, and I even sent you a link to demonstrate what I was talking about.

    https://intua.zendesk.com/hc/en-us/articles/210181406-Using-external-MIDI-controllers-and-instruments

    Are you arguing with another guy about how their instructions don’t help you for your device while giving another guy instructions that are specific to your controller? I haven’t even seen the original guy comment to your bickering and you’ve been pretty negative throughout. You talked about not having a bruised ego but you were immediately offended that someone implied you could be wrong in what you said.

    No.....you’re just jumping in and completely wrong on all accounts..... since you feel like you want to pile on, I was trying to help someone resolve an issue.....facepalm.

  • reziduerezidue

    @Strizbiz said:

    @rezidue said:

    @Strizbiz said:

    @Samplemunch said:
    No, now you are changing what you originally said, you stated that the focus editor HAD to be used to setup to trigger pads...

    @Strizbiz said:

    @Fruitbat1919 said:
    I’m still unable to send midi to multiple pads of a drum kit. Have tried everything people have suggested but no joy :(

    If you mean when using a midi controller you have to set it up in this window

    That is not true, i pointed this out and said the focus editor was for focus, you then went on and on about not sending multiple channels, which again was not needed because of single and multi mode, and now when you finally realize you were wrong, you say that you need it across multiple banks IE focus, which had nothing at all to do with the bad information you originally posted, but actually confirms what i said, the focus window is for setting up using focus.

    You are an extremely nasty person who hides behinds LOLs, your information was incorrect and anybody can check that in the Beatmaker manual, I wont reply to you again but suggest others should take your Beatmaker advice with a pinch of salt.

    I suggest you go back and read the original comment I replied to and read my reply before you decided to jump in head first and say I was wrong which was "I’m still unable to send midi to multiple pads of a drum kit. Have tried everything people have suggested but no joy :(" Now is it possible we interpreted what he's trying to accomplish in different ways? Possibly, I took it as wanting to have separate sounds mapped across a midi controller, which I accomplish by using the focus actions editor.... If he said he wanted to play 2 synths at the same time, then I would have suggested using the midi editor, unlike you, I dont have a bruised ego, and I even sent you a link to demonstrate what I was talking about.

    https://intua.zendesk.com/hc/en-us/articles/210181406-Using-external-MIDI-controllers-and-instruments

    Are you arguing with another guy about how their instructions don’t help you for your device while giving another guy instructions that are specific to your controller? I haven’t even seen the original guy comment to your bickering and you’ve been pretty negative throughout. You talked about not having a bruised ego but you were immediately offended that someone implied you could be wrong in what you said.

    No.....you’re just jumping in and completely wrong on all accounts..... since you feel like you want to pile on, I was trying to help someone resolve an issue.....facepalm.

    You told Fruitbat1919 he needs to use the focus actions editor in order to use a midi controller and he hasn't responded to you since. Then Samplemunch tried saying it wasn't true and explained why. Your follow up responses are condescending and about your specific controller. Lots of emoji talk, ellipsis and accusations of bruised egos. Not very constructive.

  • reziduerezidue

    As much as I'd like this kind of bickering on here to stop I'm now contributing to the problem. Going to see myself out.

  • ToMessToMess
    edited December 2017

    @zhoe said:

    @ToMess said:

    @Goozoon said:
    I wish they make bm3 controller, something like akai mpc studio black

    Yes. I would sell my mpc for it if it were more than just a basic pad controller

    They could make something similar to iRig Pads controller plus a little display.

    What would be the point of that? Irig pads already exist and ipad has a display

  • [Deleted User][Deleted User]

    @rezidue said:

    @Strizbiz said:

    @rezidue said:

    @Strizbiz said:

    @Samplemunch said:
    No, now you are changing what you originally said, you stated that the focus editor HAD to be used to setup to trigger pads...

    @Strizbiz said:

    @Fruitbat1919 said:
    I’m still unable to send midi to multiple pads of a drum kit. Have tried everything people have suggested but no joy :(

    If you mean when using a midi controller you have to set it up in this window

    That is not true, i pointed this out and said the focus editor was for focus, you then went on and on about not sending multiple channels, which again was not needed because of single and multi mode, and now when you finally realize you were wrong, you say that you need it across multiple banks IE focus, which had nothing at all to do with the bad information you originally posted, but actually confirms what i said, the focus window is for setting up using focus.

    You are an extremely nasty person who hides behinds LOLs, your information was incorrect and anybody can check that in the Beatmaker manual, I wont reply to you again but suggest others should take your Beatmaker advice with a pinch of salt.

    I suggest you go back and read the original comment I replied to and read my reply before you decided to jump in head first and say I was wrong which was "I’m still unable to send midi to multiple pads of a drum kit. Have tried everything people have suggested but no joy :(" Now is it possible we interpreted what he's trying to accomplish in different ways? Possibly, I took it as wanting to have separate sounds mapped across a midi controller, which I accomplish by using the focus actions editor.... If he said he wanted to play 2 synths at the same time, then I would have suggested using the midi editor, unlike you, I dont have a bruised ego, and I even sent you a link to demonstrate what I was talking about.

    https://intua.zendesk.com/hc/en-us/articles/210181406-Using-external-MIDI-controllers-and-instruments

    Are you arguing with another guy about how their instructions don’t help you for your device while giving another guy instructions that are specific to your controller? I haven’t even seen the original guy comment to your bickering and you’ve been pretty negative throughout. You talked about not having a bruised ego but you were immediately offended that someone implied you could be wrong in what you said.

    No.....you’re just jumping in and completely wrong on all accounts..... since you feel like you want to pile on, I was trying to help someone resolve an issue.....facepalm.

    You told Fruitbat1919 he needs to use the focus actions editor in order to use a midi controller and he hasn't responded to you since. Then Samplemunch tried saying it wasn't true and explained why. Your follow up responses are condescending and about your specific controller. Lots of emoji talk, ellipsis and accusations of bruised egos. Not very constructive.

    Thank you to anyone who did try to help me with my question. Since my question was originally answered, I’ve had 12 notifications from this thread and to be honest have no idea who is or isn’t actually talking to myself anymore. So apologies if I have missed anyone directly, but personally I haven’t got a clue what is going on in this thread anymore. Hope you all manage to sort out any BM3 probs you may have. Have fun peeps :)

  • [Deleted User][Deleted User]

    Just dropped back in here to see how things are going. I bought the app shortly after launch, but have hardly touched it while waiting for the bugs to be fixed and improvements made. It is disappointing to see that the app is apparently still not intuitive and remains difficult to work with.

    Yes, I know some here have it working like a charm, but really I am hoping that the app will eventually be like a more capable Blocs Wave.

  • [Deleted User][Deleted User]
    edited December 2017

    @Zen210507 said:
    Just dropped back in here to see how things are going. I bought the app shortly after launch, but have hardly touched it while waiting for the bugs to be fixed and improvements made. It is disappointing to see that the app is apparently still not intuitive and remains difficult to work with.

    Yes, I know some here have it working like a charm, but really I am hoping that the app will eventually be like a more capable Blocs Wave.

    I’m more less in the same boat and Soda dj brings some features I need from BM3... any regrets but still “few digged” in my daily work.
    ITOH since novation apps seems doomed ATM... I found yesterday a nice workflow:
    1. Compose in BlocsWave
    2. Export samples into Documents or AudioShare
    3. Open Garageband Live loops empty project
    4. Swipe to emerge Dock and open Files over GB
    5. Search for folder and start drag’n drop
    6. See the rainbow shining
    7. Praise for Apple implementing midi remote in Live loops or Novation fixing Launchpad crackling.
    8. Figure how much time I’m going to enjoy working in GarageBand with AUv3 support, timeline and so on. :wink:

  • realdavidairealdavidai
    edited December 2017

    @Dubbylabby said:
    Figure how much time I’m going to enjoy working in GarageBand with AUv3 support, timeline and so on. :

    Once I did this the whole iOS thing came together :)

  • [Deleted User][Deleted User]

    @Dubbylabby said:
    6. See the rainbow shining

    >

    Not since Graham Bonnet left. ;)

  • [Deleted User][Deleted User]

    @realdavidai said:
    @Dubbylabby said:
    Figure how much time I’m going to enjoy working in GarageBand with AUv3 support, timeline and so on. :

    Once I did this the whole iOS thing came together :)

    I still miss external midi control, Alink and so but I’m looking GB and thinking “You are a little lovely Ableton live bastard son...”

    @Zen210507 said:

    @Dubbylabby said:
    6. See the rainbow shining

    >

    Not since Graham Bonnet left. ;)

    Tribute remix for any artist using those apps will be the way to go IMHO. It’s what I was searching from BM3 in first place :wink:

  • StrizbizStrizbiz

    @rezidue said:

    @Strizbiz said:

    @rezidue said:

    @Strizbiz said:

    @Samplemunch said:
    No, now you are changing what you originally said, you stated that the focus editor HAD to be used to setup to trigger pads...

    @Strizbiz said:

    @Fruitbat1919 said:
    I’m still unable to send midi to multiple pads of a drum kit. Have tried everything people have suggested but no joy :(

    If you mean when using a midi controller you have to set it up in this window

    That is not true, i pointed this out and said the focus editor was for focus, you then went on and on about not sending multiple channels, which again was not needed because of single and multi mode, and now when you finally realize you were wrong, you say that you need it across multiple banks IE focus, which had nothing at all to do with the bad information you originally posted, but actually confirms what i said, the focus window is for setting up using focus.

    You are an extremely nasty person who hides behinds LOLs, your information was incorrect and anybody can check that in the Beatmaker manual, I wont reply to you again but suggest others should take your Beatmaker advice with a pinch of salt.

    I suggest you go back and read the original comment I replied to and read my reply before you decided to jump in head first and say I was wrong which was "I’m still unable to send midi to multiple pads of a drum kit. Have tried everything people have suggested but no joy :(" Now is it possible we interpreted what he's trying to accomplish in different ways? Possibly, I took it as wanting to have separate sounds mapped across a midi controller, which I accomplish by using the focus actions editor.... If he said he wanted to play 2 synths at the same time, then I would have suggested using the midi editor, unlike you, I dont have a bruised ego, and I even sent you a link to demonstrate what I was talking about.

    https://intua.zendesk.com/hc/en-us/articles/210181406-Using-external-MIDI-controllers-and-instruments

    Are you arguing with another guy about how their instructions don’t help you for your device while giving another guy instructions that are specific to your controller? I haven’t even seen the original guy comment to your bickering and you’ve been pretty negative throughout. You talked about not having a bruised ego but you were immediately offended that someone implied you could be wrong in what you said.

    No.....you’re just jumping in and completely wrong on all accounts..... since you feel like you want to pile on, I was trying to help someone resolve an issue.....facepalm.

    You told Fruitbat1919 he needs to use the focus actions editor in order to use a midi controller and he hasn't responded to you since. Then Samplemunch tried saying it wasn't true and explained why. Your follow up responses are condescending and about your specific controller. Lots of emoji talk, ellipsis and accusations of bruised egos. Not very constructive.

    Well you still got it wrong, and I don’t feel the need to explain anything to you....have a nice day.

  • RUST( i )KRUST( i )K

    Are there any vids of the new features available?

  • zhoezhoe

    @ToMess said:

    @zhoe said:

    @ToMess said:

    @Goozoon said:
    I wish they make bm3 controller, something like akai mpc studio black

    Yes. I would sell my mpc for it if it were more than just a basic pad controller

    They could make something similar to iRig Pads controller plus a little display.

    What would be the point of that? Irig pads already exist and ipad has a display

    So you can assign different MIDI stuff on the fly, without digging through BM3? I don’t know, kinda like Maschine integration. A few more faders, a few more knobs...that kinda thing...am just winging it, of course.

  • [Deleted User][Deleted User]

    Any news on iPhone version yet?

Sign In or Register to comment.