miRack by mifki Limited - Live!!!

dendy

@iammane said:
State save works perfectly in AUM. Behavior was a little weird in NS2 where all controls were highlighted and I couldn't turn it off. Will look again later I'm sure it's user error.

I really have no excuses now to not use this and try to learn modular synthesis better lol..

like this ? tou probably just activated "MAP" button which allows you to assign AUv3 automatable parmeter to knobs

sloJordan

Is it possible to send midi output from miRack? I want to get AudibleInstruments random sampler to send cv/gate to midi. edit: nevermind finally found the answer deep in this thread (midi out still to come)

0tolerance4silence

@dendy said:

@iammane said:
State save works perfectly in AUM. Behavior was a little weird in NS2 where all controls were highlighted and I couldn't turn it off. Will look again later I'm sure it's user error.

I really have no excuses now to not use this and try to learn modular synthesis better lol..

like this ? tou probably just activated "MAP" button which allows you to assign AUv3 automatable parmeter to knobs

What iOS version are you on?
Button highlighting (MAP, LRN etc) doesn't work here in AUM or NS2. Air3, 13.4.1

Richtowns

Insane. Mad times we live it
(no disrespect to anyone suffering any real mental problems)
Very, very impressed. Very, very impressive. Im off to app store rating

DatGood

Oh sh*t. the update is here.

rs2000

@DatGood said:
MiRack has taught me everything I wanted to know about Eurorack before actually buying physical Eurorack module. I've learnt a shit load and still having fun doing so. This is someone who bought Audulus, Model 15, and Drambo.

So on one hand, between the MiRack (also vcv, but it's a hog on my computer) and Modulargrid.com, I'm convinced that I definitely cannot jump in at those costs. The cheapest rack I can create is basically a Microfreak but 6X the cost.

But on the other hand, I'm getting a grasp of how to make some wicked boxes that do not exist anywhere in 1 ready-to-buy-box. I'm hella intrigued to make one.

So yeah, MiRack a great learning tool, but if I go broke as a junkie, and can't pay my kids' university tuition... I'm blaming @mifki for supplying the gateway drug.

How large is your house? If all resistance fails, think of the unlimited space that diving into hardware modulars will eventually eat up. No way back.
And it's a drug. Children don't want their parents to take drugs.

iammane

@0tolerance4silence said:

@dendy said:

@iammane said:
State save works perfectly in AUM. Behavior was a little weird in NS2 where all controls were highlighted and I couldn't turn it off. Will look again later I'm sure it's user error.

I really have no excuses now to not use this and try to learn modular synthesis better lol..

like this ? tou probably just activated "MAP" button which allows you to assign AUv3 automatable parmeter to knobs

What iOS version are you on?
Button highlighting (MAP, LRN etc) doesn't work here in AUM or NS2. Air3, 13.4.1

Yup! Air 3, 13.4.1. Same exact behavior, the toggle buttons don't... toggle lol. And then I cannot turn it off

0tolerance4silence

@iammane
The buttons are working fine here, it's just you can't tell what is its state.
edit: I mean it does enable function on first touch and disable it on second...
and thx for confirmation!

gonekrazy3000

Ok. I’ve definitely Been away from miRack for a while since I was waiting for the auv3 update. I’m curious. Does miRack support polyphony yet ? And by that I meant polyphonic patch cables like Vcvrack does.

dendy

@0tolerance4silence

hm, i'm still on beta, maybe it is broken in public version ? will try iy later and let you know

0tolerance4silence

@dendy said:
@0tolerance4silence

hm, i'm still on beta, maybe it is broken in public version ? will try iy later and let you know

Thanks! 👍

dendy

Confirming, this looks like bug introduced in public version - those 4 functional buttons are not highlighted when they are active. Red rectangle around knobs means you have enabled LRN or MAP button, try tap on both of them until red border disappears (it works for me)

@mifki looks like buttons doesn't switch to white background when enabled

ToMess

Is it possible to send clock from this app(as AU in AUM) to modular from some clock modules through regular audio output? Clock out can be done with audio pulses and doesent require dc coupled interface, or shouldnt require as it can be done with audio.

Edit. I found the mac app was free and tested and it worked!

mifki

Quick note - I just released a small update fixing the button highlight in AUv3 (the buttons themselves were working but no highlight was really confusing sorry).

0tolerance4silence

@mifki
I'm having UI issues with two instances in AUM. I could be wrong, but it seems like the issue is linked to CLOCK module and I can reproduce it.
Air2 12.4
1. Load miRack AU
2. Add CLOCK
3. Enable momentary RUN, and reset when RUN off
4. Connect bpm and run between CLOCK and host sync then close miRack
5. Repeat above with a second instance
6. Start AUM playback and open first instance

Audio playback is ok, but the UI is unresponsive and broken.
Will test the same in AUM on Air3 13.4.1 and report back.

Edit: UI unresponsive - you can actually break connections, but UI doesn't update at all, so you can't see what you're doing.

0tolerance4silence

Can't reproduce on Air3 13.4.1

0tolerance4silence

I should probably update, only the problems with this 12.4...

wim

I'm still curious if the MacOS release build can be run as an AU, and if so, how. I'm eager to try that out in MacOS garage band and a couple other DAWs just to see if I can get it to work.

noob

is a game changer right here.. wizards plz upload stuff to patchstorage wooooohoo

mifki

@wim said:
I'm still curious if the MacOS release build can be run as an AU, and if so, how. I'm eager to try that out in MacOS garage band and a couple other DAWs just to see if I can get it to work.

There are some issues that need to be fixed first.

@0tolerance4silence said:
Edit: UI unresponsive - you can actually break connections, but UI doesn't update at all, so you can't see what you're doing.

Ah, I think I know what's happening. For some reason it's not automatically resuming rendering in some situations, even on later versions there's a workaround for that, looks like it doesn't work on 12.4. I'll have a look.

Thopa

Hats off to such s great update. This and drambo....oh dear!
Now that it has multioutput with aum can i send voltage to the modular via dc coupled interface? expert sleepers?
Congrats

KING

Well - at long last, I’ve finally got - mi-drambo ... (combo).

(AUv3 Plugins)

🕺🏾

King

P.S. Nuff Respec to AUM.

0tolerance4silence

New update is out to fix global button states. Thx @mifki

Thopa

Ok one question, what if i wanted to use one of the mirack sequencers (like the turing machine) to sequence another instrument outside mirack, cv to midi? Thanks

0tolerance4silence

@Thopa said:
Ok one question, what if i wanted to use one of the mirack sequencers (like the turing machine) to sequence another instrument outside mirack, cv to midi? Thanks

Not just yet...

wim

Hi @mifki - Lil’ graphics issue with this one...
Pretty and kinda fun to play with though.

mifki

Oops, thanks!

Thopa

@0tolerance4silence said:

@Thopa said:
Ok one question, what if i wanted to use one of the mirack sequencers (like the turing machine) to sequence another instrument outside mirack, cv to midi? Thanks

Not just yet...

Looking forward to it

TheVimFuego

@mifki You’re a legend.

Carnbot

miRack as Auv3 is fantastic. Having different instances of different modules is such a better workflow for me than one unwieldy rack.
This is huge
Can't wait for midi out so we can use the sequencers on external instruments.
(this will also be great for routing midi between miRack instances of course)