Real time sequencer AUM?

midiSequencer

@lukesleepwalker said:
@midiSequencer loving Photon and the beta is very clean. I'd say "ready to roll". One question: can you offer the knob behavior options you offer in MidiEcho? I find the knobs in Photon to be fiddly and the solution you included in MidiEcho works well for me.

Its the same, tap the title to switch between follow your finger and updownleftright

midiSequencer

@Jumpercollins said:
@midiSequencer Thanks for releasing the manual first actually great idea to make one learn about all the features before the apps release. Good stuff. Standby for questions!

Np, it gives people an idea of what to expect when they first open it. I will do quickstarts or all main functions too.
But of course not everyone reads manuals so video is next.

midiSequencer

@Jumpercollins said:
@midiSequencer Good manual, good read and straightforward and to the point. Glad you added how to load inside AUM. In regards sharing midi out with other apps what are the options just airdrop and email or is “Open In” a option ?

sharing is standard airdrop , so any app you have installed that recognises .mid files (dropbox, files app, cubasis, audioshare, notion, patterning, apematrix, bm3 etc)
its a pain about input of midi files though, but i will have a solution for that after launch.

Also, first release is ipad only, although it works on a phone its needs a more compact ui, so will work on that next too as a free upgrade

Jumpercollins

@midiSequencer said:

@Jumpercollins said:
@midiSequencer Good manual, good read and straightforward and to the point. Glad you added how to load inside AUM. In regards sharing midi out with other apps what are the options just airdrop and email or is “Open In” a option ?

sharing is standard airdrop , so any app you have installed that recognises .mid files (dropbox, files app, cubasis, audioshare, notion, patterning, apematrix, bm3 etc)
its a pain about input of midi files though, but i will have a solution for that after launch.

Also, first release is ipad only, although it works on a phone its needs a more compact ui, so will work on that next too as a free upgrade

All good stuff hope you crack the midi in file support after release of course.

lukesleepwalker

@midiSequencer said:

@lukesleepwalker said:
@midiSequencer loving Photon and the beta is very clean. I'd say "ready to roll". One question: can you offer the knob behavior options you offer in MidiEcho? I find the knobs in Photon to be fiddly and the solution you included in MidiEcho works well for me.

Its the same, tap the title to switch between follow your finger and updownleftright

Ah, OK. I was doing a long press. Thx.

midiSequencer

u> @Jumpercollins said:

All good stuff hope you crack the midi in file support after release of course.

I have a solution thx to Jonatan, but it involves writing a document picker in the standalone application to expose the files. He did this for Audioshare as there is no other way at the moment thx to Apple

audiblevideo

@midiSequencer skim-read the documentation. Having 4 pads for patterns is awesome and very key. The groove templates sound like a lot of fun for modifying existing patterns. ⭐️⭐️⭐️⭐️⭐️

midiSequencer

good news folks! Ive got file input working for Photon, so now you can access the .mid files using Apple Files app or open a .mid file using Photon(eg from an email attachment)
Just need to put some checks in place to ensure the files are valid.

[Deleted User]

@midiSequencer said:
good news folks! Ive got file input working for Photon, so now you can access the .mid files using Apple Files app or open a .mid file using Photon(eg from an email attachment)
Just need to put some checks in place to ensure the files are valid.

Cool! Does it mean drag&drop as wel?

midiSequencer

@recccp said:
Cool! Does it mean drag&drop as wel?

two apps side by side on a split screen ipad? never tried it myself.
Any Au apps do this now?

lukesleepwalker

@midiSequencer said:
good news folks! Ive got file input working for Photon, so now you can access the .mid files using Apple Files app or open a .mid file using Photon(eg from an email attachment)
Just need to put some checks in place to ensure the files are valid.

Rocking. Send it out in the beta and I'll take it for a spin with drag and drop.

[Deleted User]

@midiSequencer said:

@recccp said:
Cool! Does it mean drag&drop as wel?

two apps side by side on a split screen ipad? never tried it myself.
Any Au apps do this now?

Yes!
Two AUs I know of, Humbletunes Elsa and Tardigrain (audio drag&drop)

RajahP

@midiSequencer said:
good news folks! Ive got file input working for Photon, so now you can access the .mid files using Apple Files app or open a .mid file using Photon(eg from an email attachment)
Just need to put some checks in place to ensure the files are valid.

Can this be implemented into Quantum?

Edit.. I think Photon is one of the most important apps for iPad music (to be released).. Thanks..

midiSequencer

@RajahP will look into it

RajahP

@midiSequencer said:
@RajahP will look into it

Will be nice to take some of these sequences that Photon has recorded and edit, enhance, transpose etc... Thanks..

Edit... Bread and butter..

midiSequencer

@RajahP said:

@midiSequencer said:
@RajahP will look into it

Will be nice to take some of these sequences that Photon has recorded and edit, enhance, transpose etc... Thanks..

Edit... Bread and butter..

Yes - I had it working with Files App (so you could see Photon & therefore could go anywhere from there) but had to rework it - so almost there

RajahP

From page 6 in the manual.. This is so important and nice... And in AU too.. sweet..

**_There are also three rotaries to allow:
Channel
You can choose to record only one particular midi channel by setting this control. Keep at – to record all midi channels.

Length
By default, recording will be unlimited (1 million events). However you can restrict the recording to be only a number of bars (with a bar being 4 beats). This allows you to create a fixed length midi file suitable for looping.
You can edit the length of the buffer afterwards if you prefer.

Quantise
Use this control to automatically quantise midi note events as they are recorded.
The default setting is off, but you can choose 1/1, 1⁄2, 1⁄4, 1/8, 1/16, 1/32 or 1/64 where each represents a division of a beat (so 1⁄4 is quarter of a beat).
The Orange tap text to its right is used to determine what part of the note information is quantized: the start beat position, the note duration, or b_**oth.

lukesleepwalker

@RajahP said:
From page 6 in the manual.. This is so important and nice... And in AU too.. sweet..

**_There are also three rotaries to allow:
Channel
You can choose to record only one particular midi channel by setting this control. Keep at – to record all midi channels.

Length
By default, recording will be unlimited (1 million events). However you can restrict the recording to be only a number of bars (with a bar being 4 beats). This allows you to create a fixed length midi file suitable for looping.
You can edit the length of the buffer afterwards if you prefer.

Quantise
Use this control to automatically quantise midi note events as they are recorded.
The default setting is off, but you can choose 1/1, 1⁄2, 1⁄4, 1/8, 1/16, 1/32 or 1/64 where each represents a division of a beat (so 1⁄4 is quarter of a beat).
The Orange tap text to its right is used to determine what part of the note information is quantized: the start beat position, the note duration, or b_**oth.

And it works so fabulously!

RajahP

@lukesleepwalker said:

@RajahP said:
From page 6 in the manual.. This is so important and nice... And in AU too.. sweet..

**_There are also three rotaries to allow:
Channel
You can choose to record only one particular midi channel by setting this control. Keep at – to record all midi channels.

Length
By default, recording will be unlimited (1 million events). However you can restrict the recording to be only a number of bars (with a bar being 4 beats). This allows you to create a fixed length midi file suitable for looping.
You can edit the length of the buffer afterwards if you prefer.

Quantise
Use this control to automatically quantise midi note events as they are recorded.
The default setting is off, but you can choose 1/1, 1⁄2, 1⁄4, 1/8, 1/16, 1/32 or 1/64 where each represents a division of a beat (so 1⁄4 is quarter of a beat).
The Orange tap text to its right is used to determine what part of the note information is quantized: the start beat position, the note duration, or b_**oth.

And it works so fabulously!

I can imagine..

midiSequencer

soon - very soon!!
I'm just finishing the ability to import midi files & manage them in the standalone app too - now I know how to do this for AU apps.

You can use airdrop to 'Open in Photon' a .mid file from email, other apps etc.
Files app is just broken with AU
Drag and drop will be after launch as its a nice to have....

Last to do is some small updates to the manual & video of this all working

audiblevideo

@midiSequencer thank you for your willingness to fill this niche and the work you’ve put into it. I hope you will be well compensated by this community.

wim

I know he’s saving me months of learning curve and effort. I was ready to dive in to build something like this myself!

And, it’s likely to work, which I can’t say I really expected if I tried it.

midiSequencer

@audiblevideo said:
@midiSequencer thank you for your willingness to fill this niche and the work you’ve put into it. I hope you will be well compensated by this community.

no problem - hope you enjoy the app

midiSequencer

@wim said:
I know he’s saving me months of learning curve and effort. I was ready to dive in to build something like this myself!

And, it’s likely to work, which I can’t say I really expected if I tried it.

Always worth learning yourself though

CracklePot

The wait is killing me.

Not really though, just excited to get my hands on this.

Mayo

So, correct me if I am wrong - I imagine that we could record midi that is also coming into IOS via outboard/DAW and also be recording the internal midi at the same time?

lukesleepwalker

@Mayo said:
So, correct me if I am wrong - I imagine that we could record midi that is also coming into IOS via outboard/DAW and also be recording the internal midi at the same time?

If you can pipe MIDI into an AB3 or AUM channel, you can record it.

Mayo

Well that is pretty promising !
I can have my (dusty) Air2 as a dedicated multitrack midi recorder for my whole studio!

Janosax

Is it possible to read or DL the manual without beta testing? I agree that wait is terrible ... any estimated time for AppStore version release? Still possible to join beta test team?

RajahP

@Janosax said:
Is it possible to read or DL the manual without beta testing? I agree that wait is terrible ... any estimated time for AppStore version release? Still possible to join beta test team?

Yep...I did download it...

http://www.amssoftware.org/manual/PhotonManual.pdf