Loopy Pro: Create music, your way.

What is Loopy Pro? — Loopy Pro is a powerful, flexible, and intuitive live looper, sampler, clip launcher and DAW for iPhone and iPad. At its core, it allows you to record and layer sounds in real-time to create complex musical arrangements. But it doesn’t stop there—Loopy Pro offers advanced tools to customize your workflow, build dynamic performance setups, and create a seamless connection between instruments, effects, and external gear.

Use it for live looping, sequencing, arranging, mixing, and much more. Whether you're a live performer, a producer, or just experimenting with sound, Loopy Pro helps you take control of your creative process.

Download on the App Store

Loopy Pro is your all-in-one musical toolkit. Try it for free today.

LK - for Ableton Live & Midi by Imaginando - AUv3 Clip Launcher Finally Available in AUM!!

1…7172747677…130

Comments

  • SynthiSynthi

    @sinosoidal said:

    @auxmux said:
    I'm not sure if this has been asked, but is it possible to match clips colors to the pads on the Launchpad X?

    It is possible but it will require a huge amount of work. I've explained before but in summary, as far as we got it from the specification, in order to use RGB on leds, we need to be in programmer mode, which puts the controllers in a mode where it is fully customizable and we need to program everything, including the behaviour of the notes mode.

    It would be easier to match LK colors to the ones provided by default by Launchpad.

    Ok... and what are the default colours?? anyone?

  • SamuSamu

    @Synthi said:

    @sinosoidal said:

    Ok... and what are the default colours?? anyone?

    From the programmer manual :)

  • wimwim

    @sinosoidal said:

    @tahiche said:
    It would indeed be helpful if using the controller mode/screen in LK. Talking about the controller... I’ve not been able to use it as is, I don’t understand why the whole controller is mapped to a single midi channel. I think you should be able to assign midi channel per control as this is a global performance tool. As is, you can’t control individual AUM channels with it, like volumes. Unless you mal everything in aum to a single midi channel and so on, but that’s a hassle.

    The forthcomming 1.10.2 will address that issue with the ability to select channel, cc, min value, max value and color for each control element.

    Nice!! Thank you so much!

  • AlmostAnonymousAlmostAnonymous

    @auxmux said:
    I'm not sure if this has been asked, but is it possible to match clips colors to the pads on the Launchpad X?

    It is possible but it will require a huge amount of work. I've explained before but in summary, as far as we got it from the specification, in order to use RGB on leds, we need to be in programmer mode, which puts the controllers in a mode where it is fully customizable and we need to program everything, including the behaviour of the notes mode.

    It would be easier to match LK colors to the ones provided by default by Launchpad.

    Hrmmm......sounds like something for the “Request new Mozaic Scripts HERE” thread to reformat colors? :p

  • Jamie_MallenderJamie_Mallender

  • soundtemplesoundtemple

    @Jamie_Mallender haha you added the Multi-track bit. I saw your post on Paul's latest video. The looping feature is cool hey

  • Jamie_MallenderJamie_Mallender

    @soundtemple said:
    @Jamie_Mallender haha you added the Multi-track bit. I saw your post on Paul's latest video. The looping feature is cool hey

    Sure is! I decided what the hell, it was already a super long video. Why not make it 10 mins longer. 😂 I did kind of feel like kicking his backside for him somewhat.

  • soundtemplesoundtemple

    @Jamie_Mallender yeah.. only had a quick peak at the vid so far. Saving it for later with some popcorn and a choctop! Thanks for putting it together. Seems like a hot topic atm.

    I've been finding LK is quite heavy on the CPU. With say 12 empty clips playing my CPU is around 60-70% (1024 buffer setting, iPad Pro - no other apps. Just an AUM session)
    Not sure whats going on there. Have you encountered that? Doesn't look like it by the amount of things you had going on in the session.

  • lukesleepwalkerlukesleepwalker

    @soundtemple said:
    @Jamie_Mallender yeah.. only had a quick peak at the vid so far. Saving it for later with some popcorn and a choctop! Thanks for putting it together. Seems like a hot topic atm.

    I've been finding LK is quite heavy on the CPU. With say 12 empty clips playing my CPU is around 60-70% (1024 buffer setting, iPad Pro - no other apps. Just an AUM session)
    Not sure whats going on there. Have you encountered that? Doesn't look like it by the amount of things you had going on in the session.

    Noted the same on the CPU although adding actual MIDI data doesn’t seem to add much to the load?

  • soundtemplesoundtemple

    @lukesleepwalker ah ok interesting. Doesn't leave much room for instruments and effects though?

  • Jamie_MallenderJamie_Mallender

    @lukesleepwalker said:

    @soundtemple said:
    @Jamie_Mallender yeah.. only had a quick peak at the vid so far. Saving it for later with some popcorn and a choctop! Thanks for putting it together. Seems like a hot topic atm.

    I've been finding LK is quite heavy on the CPU. With say 12 empty clips playing my CPU is around 60-70% (1024 buffer setting, iPad Pro - no other apps. Just an AUM session)
    Not sure whats going on there. Have you encountered that? Doesn't look like it by the amount of things you had going on in the session.

    Noted the same on the CPU although adding actual MIDI data doesn’t seem to add much to the load?

    No, that’s not been my experience at all. If I remove all the AUV3’s from a project and just run a large LK project we are looking at about 4% to 6% DSP. My iPad is a 2017 5th gen ordinary iPad. My projects have been running glitch free apart from when I’m screen recording and using the Bluetooth mouse which I have to do for the videos.

  • branisbranis

    @soundtemple said:
    @Jamie_Mallender yeah.. only had a quick peak at the vid so far. Saving it for later with some popcorn and a choctop! Thanks for putting it together. Seems like a hot topic atm.

    I've been finding LK is quite heavy on the CPU. With say 12 empty clips playing my CPU is around 60-70% (1024 buffer setting, iPad Pro - no other apps. Just an AUM session)
    Not sure whats going on there. Have you encountered that? Doesn't look like it by the amount of things you had going on in the session.

    I think your iPad is using low powered cores as long as they can handle the CPU load. Try adding some instruments and see if the CPU loads drops.

  • soundtemplesoundtemple

    @branis @Jamie_Mallender

    Mine runs at 6_7% with no clips playing but clips playing it seems very high.

    I removed instruments because cpu was causing me grief and I wanted to find out what was going on. The low powered cores is an interesting theory. Not heard of such a thing

    CPU seems to be my number 1 issue on iOS. Probably because I am an over complicator. Good lessons in keeping it simple 😜

  • branisbranis

    @soundtemple said:
    @branis @Jamie_Mallender

    Mine runs at 6_7% with no clips playing but clips playing it seems very high.

    I removed instruments because cpu was causing me grief and I wanted to find out what was going on. The low powered cores is an interesting theory. Not heard of such a thing

    CPU seems to be my number 1 issue on iOS. Probably because I am an over complicator. Good lessons in keeping it simple 😜

    I had a moment of disappointment when I got my new 10.2 2020 iPad with an A12 CPU and compared it to my old 9.7 2017 one with an A9. When I loaded a simple AUM project the CPU load was actually higher on my new iPad, but as soon as I added more plugins it dropped dramatically. Since the A9 has no power efficient cores I concluded that my new iPad must have been using the slow cores until they couldn't handle the load and then switched to the fast ones.

  • WhiteWhite

    @sinosoidal

    In the new beta:

    • When importing a midi file that has only one track, the contents are imported without adding new track

    This works fine and also when importing only one track from a midi file with more than one track 👍

  • JumpercollinsJumpercollins
    edited March 2021

    @sinosoidal in the new beta with the controller if I set it up to control the volume of my first track ch1 cc3 as shown hit midi learn in AUM nothing happens when I press learn then touch the volume control inside LK Controller?

    Is there anyway we can use the controller to learn and control on different channels inside AUM like midi mixer does from 4 Pockets. Hope so as LK could be a all in one controller for AUM.

    It’s great you can match the colours now inside the controller to AUM new colour nodes.

  • lukesleepwalkerlukesleepwalker

    @Jamie_Mallender said:

    @lukesleepwalker said:

    @soundtemple said:
    @Jamie_Mallender yeah.. only had a quick peak at the vid so far. Saving it for later with some popcorn and a choctop! Thanks for putting it together. Seems like a hot topic atm.

    I've been finding LK is quite heavy on the CPU. With say 12 empty clips playing my CPU is around 60-70% (1024 buffer setting, iPad Pro - no other apps. Just an AUM session)
    Not sure whats going on there. Have you encountered that? Doesn't look like it by the amount of things you had going on in the session.

    Noted the same on the CPU although adding actual MIDI data doesn’t seem to add much to the load?

    No, that’s not been my experience at all. If I remove all the AUV3’s from a project and just run a large LK project we are looking at about 4% to 6% DSP. My iPad is a 2017 5th gen ordinary iPad. My projects have been running glitch free apart from when I’m screen recording and using the Bluetooth mouse which I have to do for the videos.

    Thanks for the tip. You are indeed correct! I’ve got it sorted now. If you can fix the missing AUv3s in AUM (and the incessant nodes that need to be reloaded in AUM) I would appreciate your guidance!

  • ThacaposThacapos

    @SoNoob said:
    Question about the LPPmk3 implementation.
    Is the print to clip implemented? Or am I just doing something wrong?

    Sometimes I use it standalone with hardware and would like to dump track sequences into LK later.
    If not, no biggie, I can manually record midi from the sequencer or print it to ableton and export/import.

    (my skin gets itchy at the thought of opening up ableton)

    edit: one additional question. The LPP doesnt show which clip is actually playing. They all just stay lit in a channel. They do flash when I stop playback. Is this normal behavior?

    I think you have to connect the midi clock in aum with the launchpad, then the active tracks should flash when playing

  • SynthiSynthi

    @Samu said:

    @Synthi said:

    @sinosoidal said:

    Ok... and what are the default colours?? anyone?

    From the programmer manual :)

    Thanks!!!

  • w_irow_iro

    Is it possible to record, for example, an 8 bar midi loop, and then the recording turns off? Something like fixed length recording in Ableton

  • SamuSamu

    @w_iro said:
    Is it possible to record, for example, an 8 bar midi loop, and then the recording turns off? Something like fixed length recording in Ableton

    Only way I've found to do that is to create an empty clip, set its length and record to it...
    My LPPro3 has a nice fix length button that would be nice to utilize in LK as well :)

    I have no clue on what @sinosoidal has planned for LK in the future.

  • sinosoidalsinosoidal

    @Jumpercollins said:
    @sinosoidal in the new beta with the controller if I set it up to control the volume of my first track ch1 cc3 as shown hit midi learn in AUM nothing happens when I press learn then touch the volume control inside LK Controller?

    Is there anyway we can use the controller to learn and control on different channels inside AUM like midi mixer does from 4 Pockets. Hope so as LK could be a all in one controller for AUM.

    It’s great you can match the colours now inside the controller to AUM new colour nodes.

    It seems you are not selecting a output device in status bar. The midi is not being sent at all.

  • sinosoidalsinosoidal

    @White said:
    @sinosoidal

    In the new beta:

    • When importing a midi file that has only one track, the contents are imported without adding new track

    This works fine and also when importing only one track from a midi file with more than one track 👍

    :blush:

  • sinosoidalsinosoidal

    @sinosoidal said:

    @Jumpercollins said:
    @sinosoidal in the new beta with the controller if I set it up to control the volume of my first track ch1 cc3 as shown hit midi learn in AUM nothing happens when I press learn then touch the volume control inside LK Controller?

    Is there anyway we can use the controller to learn and control on different channels inside AUM like midi mixer does from 4 Pockets. Hope so as LK could be a all in one controller for AUM.

    It’s great you can match the colours now inside the controller to AUM new colour nodes.

    It seems you are not selecting a output device in status bar. The midi is not being sent at all.

    When testing this just realized that the Channel number is being sent with (channel +1). Needs to be fixed.

  • RajahPRajahP
    edited March 2021

    Is it me or recording seem to drift after 17 bars? Notes seem to be ‘on grid’ visually, but the sound gets out of sync after 17+ bars... Anyone?

    Edit... Export seems to play ok on desktop (Fl Studio).

  • w_irow_iro

    Thanks @Samu , fixed length would be awesome. I think good feature for jams

  • auxmuxauxmux

    @sinosoidal midi controller options are not appearing for me on 13.6 or 14.4 devices.

  • JumpercollinsJumpercollins

    @auxmux Did you try on the Controller page drag up. under Functions hold down Properties it turns white then press the control you want edit to bring up the settings menu.

  • auxmuxauxmux

    @Jumpercollins said:
    @auxmux Did you try on the Controller page drag up. under Functions hold down Properties it turns white then press the control you want edit to bring up the settings menu.

    Yup, tried and nothing is coming up in AU or standalone.

  • auxmuxauxmux

    @auxmux said:

    @Jumpercollins said:
    @auxmux Did you try on the Controller page drag up. under Functions hold down Properties it turns white then press the control you want edit to bring up the settings menu.

    Yup, tried and nothing is coming up in AU or standalone.

    Actually, didn't realize that long press was necessary. Somewhat confusing. I figured since last touch on top of the screen shows which control was last selected, it would toggle Properties right away.

Sign In or Register to comment.

© Vanilla Keystone Theme 2024