Jim Audio New App, GROOVERIDER 2 In Store.

eross

how long does it take to populate to the US app store?

cokomairena

You can see the changelog on the stores where is available:

アップデート履歴
1.0.32025年1月28日

• fixed bug with bluetooth midi devices, which were not connecting properly with GR-2;

• fixed crash when reordering parts on the Mixer page;

• fixed: part modulation wheel / pitch bend values were not correctly restoring for AUv3 audio units;

• added partial support for AUv3 units which do not provide proper support for automation recording, with info message for these audio units;

• redefine AU knobs algorithm can now detect some parameters of AUv3 audio units mentioned above (use it when playback is stopped);

• added a number of layer and part presets into Factory Bank A;

• added random pattern name generator for newly created patterns (shown in Save dialog);

• other minor bug fixes.

1.0.22025年1月22日

• added: "Redefine AU knobs" function in the layer hold menu, allowing to assign custom AU parameters for the 9 onscreen AU knobs;

• added: Settings -> Midi -> "Midi Learn" with info on how to activate Midi Learn;

• fixed: crash when loading Drum Rack Preset during playback;

• fixed: crash on menu button tap in the clip editor when there is no current clip selected;

• fixed: no undo when adding new empty clip in the clip session grid;

• fixed: vertical zoom was often reset in the notes editor when used in Scale mode;

• added support for AUv3 audio units which dynamically update their parameter tree;

• fixed issue with recording notes into a non-looped (one-shot) clip;

• improved displaying the image of the non-looped (one shot) clip in the clip session grid;

• "Emulate Ramps" option added in the hold-popup menu for those bus AUv3 effects, which claim to support parameter ramping but in fact do not;

• fixed: clip automation was not playing correctly for clips where loop start and cue setting greater than zero;

• fixed: part IFX routing was displayed incorrectly;

• added: for the hold-down menus you can now swipe directly to the menu item, no need to lift finger up and tap again;

• additional minor bug fixes.

1.0.12025年1月16日

• fixed: parameter set change, UI not updating;

• fixed: record with REC precount started at wrong bar;

• fixed: no Undo for parameter set change/add/delete set;

• fixed: start as Inter-App Audio (IAA) showed a blank screen;

• fixed: hanging midi notes under IAA mode when host app had Cycle enabled;

• fixed: overdub record mode when recorded in song loop.

1.0.02025年1月13日

cokomairena

@oscillotus said:
Will it be possible in this app to use midi generating AUv3s? Like Harmony Bloom?

yes, it's shown on the soundtestroom demo

cokomairena

@dakti said:

show previous quotes

@audio_DT said:

@kopi said:

@Eschatone said:

@kopi said:
price just got raised in app store (EU) 2h ago, preorder discount is gone, good sign!

It’s still showing up as $29.99 in the U.S. store. Out of curiosity, what was the preorder discount price for EU before?

yes, indeed, preordered at 34.95EUR, now 39.95EUR

I think I ordered it at £29.99.

In my case the price changed from 150 PLN to 200 PLN. In the Polish AppStore: 50 PLN (tax is included) is the equivalent of $10 in the US Appstore. So in Poland the price increased not by $5 but by $10 (luckily I pre-ordered).

Oh you will get it soon! I loved Krakow what a pretty country, I loved it! It was fun and cheap lol I went just when the corona was starting so I had an interesting experience lol

dendy

@cokomairena said:

show previous quotes

@dakti said:

@audio_DT said:

@kopi said:

@Eschatone said:

@kopi said:
price just got raised in app store (EU) 2h ago, preorder discount is gone, good sign!

It’s still showing up as $29.99 in the U.S. store. Out of curiosity, what was the preorder discount price for EU before?

yes, indeed, preordered at 34.95EUR, now 39.95EUR

I think I ordered it at £29.99.

In my case the price changed from 150 PLN to 200 PLN. In the Polish AppStore: 50 PLN (tax is included) is the equivalent of $10 in the US Appstore. So in Poland the price increased not by $5 but by $10 (luckily I pre-ordered).

Oh you will get it soon! I loved Krakow what a pretty country, I loved it! It was fun and cheap lol I went just when the corona was starting so I had an interesting experience lol

Absolutely beautiful city .. was there for 3 days last year and definitly will go back there .. I even sometimes play with idea of moving there (Slovakia is pretty much shit recently, and things only getting worse anyway ...)

wim

A new post release thread has been started to make finding post-release discussion easier. Please continue there.

https://forum.loopypro.com/discussion/comment/1382430/#Comment_1382430

This thread has been closed temporarily to help redirect the discussion. I hope that doesn't inconvenience anyone.

[edit] re-opened now, but it would still be best to consolidate new discussion to the other thread.

michael_m

@eross said:
how long does it take to populate to the US app store?

Pretty much last. Most of the world starts their day before we do.

MrSmileZ

So there’s no included samples, sound fonts, or wavetables? Really?

Edward_Alexander

@MrSmileZ said:
So there’s no included samples, sound fonts, or wavetables? Really?

Tap on the “Browse” magnifying glass at the top left corner.

There’s tons. Doug went over this in his preview video.

Edit: sorry, saw the new thread

arnou

@thesoundtestroom said:
@arnou It does have audio warp, so your imported loops can be temp synced.
It does not have sample drag and drop.

Thank you.

stelvio

Oh no! IOS 16 minimum, my old and still up and running iPad Air 2 won't like that

MrSmileZ

@Edward_Alexander said:

show previous quotes

@MrSmileZ said:
So there’s no included samples, sound fonts, or wavetables? Really?

Tap on the “Browse” magnifying glass at the top left corner.

There’s tons. Doug went over this in his preview video.

Edit: sorry, saw the new thread

Yea I seen it after and corrected one post but not the other…thanks for helping, it is definitely appreciated

TomNoise

can grooverider 2 be used in AUM as an auv3 ? gr16 was auv3 but it seems grooverider 2 can only be used in AUM as an IAA ? (sorry if this was asked here before but i can not find any info about this)

Edward_Alexander

@TomNoise said:
can grooverider 2 be used in AUM as an auv3 ? gr16 was auv3 but it seems grooverider 2 can only be used in AUM as an IAA ? (sorry if this was asked here before but i can not find any info about this)

No, no yet.

Most of us are fairly confident that this will come later. Going by what he’s done in the past with all of his other apps. Remember, GR16 was the same way when it first came out.

TomNoise

i just received his answer by email :
„ Hello!
No, Groove Rider 2 is a AUv3 host and there are no plans to make it a plugin currently.
Regards
Jim“

EdZAB

I'm using a Wavetable part and it appears in the settings that you can have the velocity of the incoming note change the wave position (labeled w. pos in the WT Settings). It does seem to react when that knob is adjusted, but it does not seem to vary at all within the range even though it is receiving notes with different velocities - it just seems to jump to the max level what was set by the knob. My guess would be that the knob that says "Vel > W. POS" is supposed to convert the note velocity to lower and higher levels of the wavetable position (from the playing clip). Anyone else have success with doing that?

Here's a screenshot showing the knob that appears to control the scaling of the velocity to wavetable position:

**Edit: Observing the same behavior when loading Samples - for example the "Deeper" sample and the velocity sample start position knob. But SoundForMore has a demo showing it working (GrooveRider Tutorial 7), so it looks like I've missed something, or my setup is different.

**Edit #2: It looks like the functionality works in the Sampler instrument, but not in the Soundfont instrument or the Wavetable instrument. My mistake was I loaded the sample from the browser and it loaded up into the Soundfont instrument instead of the Sampler instrument which is what Leo is using at SoundForMore in his video.

wim

I like to use the envelope to modulate the wave table position. You have control then over how much velocity and sustain impact the wave position.

yellow_eyez

Wrong post but all good

jwmmakerofmusic

@yellow_eyez said:
I want to thank @jwmmakerofmusic especially for looking out on this one

This is certainly at the number one spot for app of the year

Man this is the Best groovebox i ever saw, or touched. And it’s really gorgeous

Thank you so much Jim
Your kindness and support will always be remember and appreciated

And Fwiw I still think you are the absolute best producer on our awesome forum and our little community, capable of doing any genre and this app would be candy for you, so I get why you love it so much

Again, thanks Jimbo

[And thank you @Michael - if you didn’t make this forum basically “open source” for all iOS and iPadOS dev, I don’t know where I or we would be right now, especially me man, thanks to you from the bottom of my heart ]

You two are true, blue friends, and true experts at what you do respectively, but most of all , good human beings man

—————
With that said Groove rider 2 rules !!

Cheers mate. 🍻 Glad you're digging GR2. It really is contender for "Best iOS App of 2025" in my humble opinion.