Comments

• AudioGus

  May 2017

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.
• gonekrazy3000

  May 2017 edited May 2017

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.
• AudioGus

  May 2017 edited May 2017

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.

  I just decided to nuke it and reinstall completely. Past few minutes work OK. Not using it in AUM yet or AB, just FD and Modstep, but like I say, so far it seems better.

  WHat the heck notes are these pads assigned to anyway, can you change them?! Should I read the manual?! Hehe. Would be nice if FD would let you save midi note configs... errr, can FD save midi note comfigs?
• wim

  May 2017

  Touch the midi icon to see / change the midi note mappings. In my limited tests, I found it a bit of a pain to change them, but manageable. They're global, so you can't save a bunch of different mappings that I can tell. For me they persist between sessions, but some have said they don't. Wierd that one.
• gonekrazy3000

  May 2017

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.

  I just decided to nuke it and reinstall completely. Past few minutes work OK. Not using it in AUM yet or AB, just FD and Modstep, but like I say, so far it seems better.

  WHat the heck notes are these pads assigned to anyway, can you change them?! Should I read the manual?! Hehe. Would be nice if FD would let you save midi note configs... errr, can FD save midi note comfigs?

  in my opinion if you're pointing it at modsteps sampler. its better to let the midi come in. and drag and drop the appropraite samples as they get triggered.
• AudioGus

  May 2017

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.

  I just decided to nuke it and reinstall completely. Past few minutes work OK. Not using it in AUM yet or AB, just FD and Modstep, but like I say, so far it seems better.

  WHat the heck notes are these pads assigned to anyway, can you change them?! Should I read the manual?! Hehe. Would be nice if FD would let you save midi note configs... errr, can FD save midi note comfigs?

  in my opinion if you're pointing it at modsteps sampler. its better to let the midi come in. and drag and drop the appropraite samples as they get triggered.

  Yah it is the fills I am having trickiness with. Would like to first get them 'right' then mess around.
• AudioGus

  May 2017

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.

  I just decided to nuke it and reinstall completely. Past few minutes work OK. Not using it in AUM yet or AB, just FD and Modstep, but like I say, so far it seems better.

  WHat the heck notes are these pads assigned to anyway, can you change them?! Should I read the manual?! Hehe. Would be nice if FD would let you save midi note configs... errr, can FD save midi note comfigs?

  in my opinion if you're pointing it at modsteps sampler. its better to let the midi come in. and drag and drop the appropraite samples as they get triggered.

  Yah it is the fills I am having trickiness with. Would like to first get them 'right' then mess around.

  Oh i see, i gettin it now... step2 load up my fav smaples. Thanks for the Modstep tip, very cool!
• gonekrazy3000

  May 2017

  @AudioGus said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.

  I just decided to nuke it and reinstall completely. Past few minutes work OK. Not using it in AUM yet or AB, just FD and Modstep, but like I say, so far it seems better.

  WHat the heck notes are these pads assigned to anyway, can you change them?! Should I read the manual?! Hehe. Would be nice if FD would let you save midi note configs... errr, can FD save midi note comfigs?

  in my opinion if you're pointing it at modsteps sampler. its better to let the midi come in. and drag and drop the appropraite samples as they get triggered.

  Yah it is the fills I am having trickiness with. Would like to first get them 'right' then mess around.

  Oh i see, i gettin it now... step2 load up my fav smaples. Thanks for the Modstep tip, very cool!

  It's the same workflow as ableton if you use ifunbox you can actually dump nested folders with all your samples sorted properly. Another lovely thing about modstep's sampler is you can change the pitch of the sample by semitones. Something I truly wish Bilbao had....
• RUST( i )K

  May 2017

  @gonekrazy3000 said:

  @AudioGus said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.

  I just decided to nuke it and reinstall completely. Past few minutes work OK. Not using it in AUM yet or AB, just FD and Modstep, but like I say, so far it seems better.

  WHat the heck notes are these pads assigned to anyway, can you change them?! Should I read the manual?! Hehe. Would be nice if FD would let you save midi note configs... errr, can FD save midi note comfigs?

  in my opinion if you're pointing it at modsteps sampler. its better to let the midi come in. and drag and drop the appropraite samples as they get triggered.

  Yah it is the fills I am having trickiness with. Would like to first get them 'right' then mess around.

  Oh i see, i gettin it now... step2 load up my fav smaples. Thanks for the Modstep tip, very cool!

  It's the same workflow as ableton if you use ifunbox you can actually dump nested folders with all your samples sorted properly. Another lovely thing about modstep's sampler is you can change the pitch of the sample by semitones. Something I truly wish Bilbao had....

  Rotor does as well no?

  Egoist?

  I need to look at MODSTEPS sample situation.

  The only thing I have tinkered in it with are the MIDI out. Basically what Genome does.

  Never tried the sample use and experience with MODSTEP.

  Can you record into MODSTEP (output slot) and use that recorded audio instantly as a sample in a project?

  What options of sound standards are audio projects in Modstep? What is default anyway?
• AndyPlankton

  May 2017

  @RustiK said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.

  I just decided to nuke it and reinstall completely. Past few minutes work OK. Not using it in AUM yet or AB, just FD and Modstep, but like I say, so far it seems better.

  WHat the heck notes are these pads assigned to anyway, can you change them?! Should I read the manual?! Hehe. Would be nice if FD would let you save midi note configs... errr, can FD save midi note comfigs?

  in my opinion if you're pointing it at modsteps sampler. its better to let the midi come in. and drag and drop the appropraite samples as they get triggered.

  Yah it is the fills I am having trickiness with. Would like to first get them 'right' then mess around.

  Oh i see, i gettin it now... step2 load up my fav smaples. Thanks for the Modstep tip, very cool!

  It's the same workflow as ableton if you use ifunbox you can actually dump nested folders with all your samples sorted properly. Another lovely thing about modstep's sampler is you can change the pitch of the sample by semitones. Something I truly wish Bilbao had....

  Rotor does as well no?

  Egoist?

  I need to look at MODSTEPS sample situation.

  The only thing I have tinkered in it with are the MIDI out. Basically what Genome does.

  Never tried the sample use and experience with MODSTEP.

  Can you record into MODSTEP (output slot) and use that recorded audio instantly as a sample in a project?

  What options of sound standards are audio projects in Modstep? What is default anyway?

  You cannot record directly onto a pad, but you can record, then drag and drop the audio onto a pad.
• AudioGus

  May 2017

  @AndyPlankton said:

  @RustiK said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.

  I just decided to nuke it and reinstall completely. Past few minutes work OK. Not using it in AUM yet or AB, just FD and Modstep, but like I say, so far it seems better.

  WHat the heck notes are these pads assigned to anyway, can you change them?! Should I read the manual?! Hehe. Would be nice if FD would let you save midi note configs... errr, can FD save midi note comfigs?

  in my opinion if you're pointing it at modsteps sampler. its better to let the midi come in. and drag and drop the appropraite samples as they get triggered.

  Yah it is the fills I am having trickiness with. Would like to first get them 'right' then mess around.

  Oh i see, i gettin it now... step2 load up my fav smaples. Thanks for the Modstep tip, very cool!

  It's the same workflow as ableton if you use ifunbox you can actually dump nested folders with all your samples sorted properly. Another lovely thing about modstep's sampler is you can change the pitch of the sample by semitones. Something I truly wish Bilbao had....

  Rotor does as well no?

  Egoist?

  I need to look at MODSTEPS sample situation.

  The only thing I have tinkered in it with are the MIDI out. Basically what Genome does.

  Never tried the sample use and experience with MODSTEP.

  Can you record into MODSTEP (output slot) and use that recorded audio instantly as a sample in a project?

  What options of sound standards are audio projects in Modstep? What is default anyway?

  You cannot record directly onto a pad, but you can record, then drag and drop the audio onto a pad.

  'BM3'

  (First in thread!)
• gonekrazy3000

  May 2017

  @AudioGus said:

  @AndyPlankton said:

  @RustiK said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.

  I just decided to nuke it and reinstall completely. Past few minutes work OK. Not using it in AUM yet or AB, just FD and Modstep, but like I say, so far it seems better.

  WHat the heck notes are these pads assigned to anyway, can you change them?! Should I read the manual?! Hehe. Would be nice if FD would let you save midi note configs... errr, can FD save midi note comfigs?

  in my opinion if you're pointing it at modsteps sampler. its better to let the midi come in. and drag and drop the appropraite samples as they get triggered.

  Yah it is the fills I am having trickiness with. Would like to first get them 'right' then mess around.

  Oh i see, i gettin it now... step2 load up my fav smaples. Thanks for the Modstep tip, very cool!

  It's the same workflow as ableton if you use ifunbox you can actually dump nested folders with all your samples sorted properly. Another lovely thing about modstep's sampler is you can change the pitch of the sample by semitones. Something I truly wish Bilbao had....

  Rotor does as well no?

  Egoist?

  I need to look at MODSTEPS sample situation.

  The only thing I have tinkered in it with are the MIDI out. Basically what Genome does.

  Never tried the sample use and experience with MODSTEP.

  Can you record into MODSTEP (output slot) and use that recorded audio instantly as a sample in a project?

  What options of sound standards are audio projects in Modstep? What is default anyway?

  You cannot record directly onto a pad, but you can record, then drag and drop the audio onto a pad.

  'BM3'

  (First in thread!)

  might as well talk about unicorns or leprechaun gold. I'll believe it when i see it.
• AudioGus

  May 2017

  @gonekrazy3000 said:

  @AudioGus said:

  @AndyPlankton said:

  @RustiK said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.

  I just decided to nuke it and reinstall completely. Past few minutes work OK. Not using it in AUM yet or AB, just FD and Modstep, but like I say, so far it seems better.

  WHat the heck notes are these pads assigned to anyway, can you change them?! Should I read the manual?! Hehe. Would be nice if FD would let you save midi note configs... errr, can FD save midi note comfigs?

  in my opinion if you're pointing it at modsteps sampler. its better to let the midi come in. and drag and drop the appropraite samples as they get triggered.

  Yah it is the fills I am having trickiness with. Would like to first get them 'right' then mess around.

  Oh i see, i gettin it now... step2 load up my fav smaples. Thanks for the Modstep tip, very cool!

  It's the same workflow as ableton if you use ifunbox you can actually dump nested folders with all your samples sorted properly. Another lovely thing about modstep's sampler is you can change the pitch of the sample by semitones. Something I truly wish Bilbao had....

  Rotor does as well no?

  Egoist?

  I need to look at MODSTEPS sample situation.

  The only thing I have tinkered in it with are the MIDI out. Basically what Genome does.

  Never tried the sample use and experience with MODSTEP.

  Can you record into MODSTEP (output slot) and use that recorded audio instantly as a sample in a project?

  What options of sound standards are audio projects in Modstep? What is default anyway?

  You cannot record directly onto a pad, but you can record, then drag and drop the audio onto a pad.

  'BM3'

  (First in thread!)

  might as well talk about unicorns or leprechaun gold. I'll believe it when i see it.

  yarrr! I saw a dropbox video from 50 fathoms deep in the internet... with me own eyes I did! Pads were recorded instantly! it was like the app knew... when sound began and ended... as if it had ears of its own... yarrr...
• gonekrazy3000

  May 2017

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AndyPlankton said:

  @RustiK said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.

  I just decided to nuke it and reinstall completely. Past few minutes work OK. Not using it in AUM yet or AB, just FD and Modstep, but like I say, so far it seems better.

  WHat the heck notes are these pads assigned to anyway, can you change them?! Should I read the manual?! Hehe. Would be nice if FD would let you save midi note configs... errr, can FD save midi note comfigs?

  in my opinion if you're pointing it at modsteps sampler. its better to let the midi come in. and drag and drop the appropraite samples as they get triggered.

  Yah it is the fills I am having trickiness with. Would like to first get them 'right' then mess around.

  Oh i see, i gettin it now... step2 load up my fav smaples. Thanks for the Modstep tip, very cool!

  It's the same workflow as ableton if you use ifunbox you can actually dump nested folders with all your samples sorted properly. Another lovely thing about modstep's sampler is you can change the pitch of the sample by semitones. Something I truly wish Bilbao had....

  Rotor does as well no?

  Egoist?

  I need to look at MODSTEPS sample situation.

  The only thing I have tinkered in it with are the MIDI out. Basically what Genome does.

  Never tried the sample use and experience with MODSTEP.

  Can you record into MODSTEP (output slot) and use that recorded audio instantly as a sample in a project?

  What options of sound standards are audio projects in Modstep? What is default anyway?

  You cannot record directly onto a pad, but you can record, then drag and drop the audio onto a pad.

  'BM3'

  (First in thread!)

  might as well talk about unicorns or leprechaun gold. I'll believe it when i see it.

  yarrr! I saw a dropbox video from 50 fathoms deep in the internet... with me own eyes I did! Pads were recorded instantly! it was like the app knew... when sound began and ended... as if it had ears of its own... yarrr...

  Sounds like ye got taken in by the call of them sirens. So many landlubbers get dragged into the deep listening to their dulcet tones. Crying shame if ye ask me
• AudioGus

  May 2017

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AndyPlankton said:

  @RustiK said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.

  I just decided to nuke it and reinstall completely. Past few minutes work OK. Not using it in AUM yet or AB, just FD and Modstep, but like I say, so far it seems better.

  WHat the heck notes are these pads assigned to anyway, can you change them?! Should I read the manual?! Hehe. Would be nice if FD would let you save midi note configs... errr, can FD save midi note comfigs?

  in my opinion if you're pointing it at modsteps sampler. its better to let the midi come in. and drag and drop the appropraite samples as they get triggered.

  Yah it is the fills I am having trickiness with. Would like to first get them 'right' then mess around.

  Oh i see, i gettin it now... step2 load up my fav smaples. Thanks for the Modstep tip, very cool!

  It's the same workflow as ableton if you use ifunbox you can actually dump nested folders with all your samples sorted properly. Another lovely thing about modstep's sampler is you can change the pitch of the sample by semitones. Something I truly wish Bilbao had....

  Rotor does as well no?

  Egoist?

  I need to look at MODSTEPS sample situation.

  The only thing I have tinkered in it with are the MIDI out. Basically what Genome does.

  Never tried the sample use and experience with MODSTEP.

  Can you record into MODSTEP (output slot) and use that recorded audio instantly as a sample in a project?

  What options of sound standards are audio projects in Modstep? What is default anyway?

  You cannot record directly onto a pad, but you can record, then drag and drop the audio onto a pad.

  'BM3'

  (First in thread!)

  might as well talk about unicorns or leprechaun gold. I'll believe it when i see it.

  yarrr! I saw a dropbox video from 50 fathoms deep in the internet... with me own eyes I did! Pads were recorded instantly! it was like the app knew... when sound began and ended... as if it had ears of its own... yarrr...

  Sounds like ye got taken in by the call of them sirens. So many landlubbers get dragged into the deep listening to their dulcet tones. Crying shame if ye ask me

  Behold! From the Great @Samu!

  https://www.dropbox.com/s/kx2nok1jb0w50ed/ruissampler.mov?dl=0
• gonekrazy3000

  May 2017

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AndyPlankton said:

  @RustiK said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.

  I just decided to nuke it and reinstall completely. Past few minutes work OK. Not using it in AUM yet or AB, just FD and Modstep, but like I say, so far it seems better.

  WHat the heck notes are these pads assigned to anyway, can you change them?! Should I read the manual?! Hehe. Would be nice if FD would let you save midi note configs... errr, can FD save midi note comfigs?

  in my opinion if you're pointing it at modsteps sampler. its better to let the midi come in. and drag and drop the appropraite samples as they get triggered.

  Yah it is the fills I am having trickiness with. Would like to first get them 'right' then mess around.

  Oh i see, i gettin it now... step2 load up my fav smaples. Thanks for the Modstep tip, very cool!

  It's the same workflow as ableton if you use ifunbox you can actually dump nested folders with all your samples sorted properly. Another lovely thing about modstep's sampler is you can change the pitch of the sample by semitones. Something I truly wish Bilbao had....

  Rotor does as well no?

  Egoist?

  I need to look at MODSTEPS sample situation.

  The only thing I have tinkered in it with are the MIDI out. Basically what Genome does.

  Never tried the sample use and experience with MODSTEP.

  Can you record into MODSTEP (output slot) and use that recorded audio instantly as a sample in a project?

  What options of sound standards are audio projects in Modstep? What is default anyway?

  You cannot record directly onto a pad, but you can record, then drag and drop the audio onto a pad.

  'BM3'

  (First in thread!)

  might as well talk about unicorns or leprechaun gold. I'll believe it when i see it.

  yarrr! I saw a dropbox video from 50 fathoms deep in the internet... with me own eyes I did! Pads were recorded instantly! it was like the app knew... when sound began and ended... as if it had ears of its own... yarrr...

  Sounds like ye got taken in by the call of them sirens. So many landlubbers get dragged into the deep listening to their dulcet tones. Crying shame if ye ask me

  Behold! From the Great @Samu!

  https://www.dropbox.com/s/kx2nok1jb0w50ed/ruissampler.mov?dl=0

  pretty sure you broke Samu's NDA by sharing that D=
• AudioGus

  May 2017

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AndyPlankton said:

  @RustiK said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.

  I just decided to nuke it and reinstall completely. Past few minutes work OK. Not using it in AUM yet or AB, just FD and Modstep, but like I say, so far it seems better.

  WHat the heck notes are these pads assigned to anyway, can you change them?! Should I read the manual?! Hehe. Would be nice if FD would let you save midi note configs... errr, can FD save midi note comfigs?

  in my opinion if you're pointing it at modsteps sampler. its better to let the midi come in. and drag and drop the appropraite samples as they get triggered.

  Yah it is the fills I am having trickiness with. Would like to first get them 'right' then mess around.

  Oh i see, i gettin it now... step2 load up my fav smaples. Thanks for the Modstep tip, very cool!

  It's the same workflow as ableton if you use ifunbox you can actually dump nested folders with all your samples sorted properly. Another lovely thing about modstep's sampler is you can change the pitch of the sample by semitones. Something I truly wish Bilbao had....

  Rotor does as well no?

  Egoist?

  I need to look at MODSTEPS sample situation.

  The only thing I have tinkered in it with are the MIDI out. Basically what Genome does.

  Never tried the sample use and experience with MODSTEP.

  Can you record into MODSTEP (output slot) and use that recorded audio instantly as a sample in a project?

  What options of sound standards are audio projects in Modstep? What is default anyway?

  You cannot record directly onto a pad, but you can record, then drag and drop the audio onto a pad.

  'BM3'

  (First in thread!)

  might as well talk about unicorns or leprechaun gold. I'll believe it when i see it.

  yarrr! I saw a dropbox video from 50 fathoms deep in the internet... with me own eyes I did! Pads were recorded instantly! it was like the app knew... when sound began and ended... as if it had ears of its own... yarrr...

  Sounds like ye got taken in by the call of them sirens. So many landlubbers get dragged into the deep listening to their dulcet tones. Crying shame if ye ask me

  Behold! From the Great @Samu!

  https://www.dropbox.com/s/kx2nok1jb0w50ed/ruissampler.mov?dl=0

  pretty sure you broke Samu's NDA by sharing that D=

  He already posted it on this here forum in another thread saying it won't get him booted out of the beta.
• AndyPlankton

  May 2017

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AndyPlankton said:

  @RustiK said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.

  I just decided to nuke it and reinstall completely. Past few minutes work OK. Not using it in AUM yet or AB, just FD and Modstep, but like I say, so far it seems better.

  WHat the heck notes are these pads assigned to anyway, can you change them?! Should I read the manual?! Hehe. Would be nice if FD would let you save midi note configs... errr, can FD save midi note comfigs?

  in my opinion if you're pointing it at modsteps sampler. its better to let the midi come in. and drag and drop the appropraite samples as they get triggered.

  Yah it is the fills I am having trickiness with. Would like to first get them 'right' then mess around.

  Oh i see, i gettin it now... step2 load up my fav smaples. Thanks for the Modstep tip, very cool!

  It's the same workflow as ableton if you use ifunbox you can actually dump nested folders with all your samples sorted properly. Another lovely thing about modstep's sampler is you can change the pitch of the sample by semitones. Something I truly wish Bilbao had....

  Rotor does as well no?

  Egoist?

  I need to look at MODSTEPS sample situation.

  The only thing I have tinkered in it with are the MIDI out. Basically what Genome does.

  Never tried the sample use and experience with MODSTEP.

  Can you record into MODSTEP (output slot) and use that recorded audio instantly as a sample in a project?

  What options of sound standards are audio projects in Modstep? What is default anyway?

  You cannot record directly onto a pad, but you can record, then drag and drop the audio onto a pad.

  'BM3'

  (First in thread!)

  might as well talk about unicorns or leprechaun gold. I'll believe it when i see it.

  yarrr! I saw a dropbox video from 50 fathoms deep in the internet... with me own eyes I did! Pads were recorded instantly! it was like the app knew... when sound began and ended... as if it had ears of its own... yarrr...

  Sounds like ye got taken in by the call of them sirens. So many landlubbers get dragged into the deep listening to their dulcet tones. Crying shame if ye ask me

  Behold! From the Great @Samu!

  https://www.dropbox.com/s/kx2nok1jb0w50ed/ruissampler.mov?dl=0

  pretty sure you broke Samu's NDA by sharing that D=

  He already posted it on this here forum in another thread saying it won't get him booted out of the beta.

  I was expecting video of Unicorns and pots of gold, but no...boring old recording onto pads
• AudioGus

  May 2017

  @AndyPlankton said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AndyPlankton said:

  @RustiK said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.

  I just decided to nuke it and reinstall completely. Past few minutes work OK. Not using it in AUM yet or AB, just FD and Modstep, but like I say, so far it seems better.

  WHat the heck notes are these pads assigned to anyway, can you change them?! Should I read the manual?! Hehe. Would be nice if FD would let you save midi note configs... errr, can FD save midi note comfigs?

  in my opinion if you're pointing it at modsteps sampler. its better to let the midi come in. and drag and drop the appropraite samples as they get triggered.

  Yah it is the fills I am having trickiness with. Would like to first get them 'right' then mess around.

  Oh i see, i gettin it now... step2 load up my fav smaples. Thanks for the Modstep tip, very cool!

  It's the same workflow as ableton if you use ifunbox you can actually dump nested folders with all your samples sorted properly. Another lovely thing about modstep's sampler is you can change the pitch of the sample by semitones. Something I truly wish Bilbao had....

  Rotor does as well no?

  Egoist?

  I need to look at MODSTEPS sample situation.

  The only thing I have tinkered in it with are the MIDI out. Basically what Genome does.

  Never tried the sample use and experience with MODSTEP.

  Can you record into MODSTEP (output slot) and use that recorded audio instantly as a sample in a project?

  What options of sound standards are audio projects in Modstep? What is default anyway?

  You cannot record directly onto a pad, but you can record, then drag and drop the audio onto a pad.

  'BM3'

  (First in thread!)

  might as well talk about unicorns or leprechaun gold. I'll believe it when i see it.

  yarrr! I saw a dropbox video from 50 fathoms deep in the internet... with me own eyes I did! Pads were recorded instantly! it was like the app knew... when sound began and ended... as if it had ears of its own... yarrr...

  Sounds like ye got taken in by the call of them sirens. So many landlubbers get dragged into the deep listening to their dulcet tones. Crying shame if ye ask me

  Behold! From the Great @Samu!

  https://www.dropbox.com/s/kx2nok1jb0w50ed/ruissampler.mov?dl=0

  pretty sure you broke Samu's NDA by sharing that D=

  He already posted it on this here forum in another thread saying it won't get him booted out of the beta.

  I was expecting video of Unicorns and pots of gold, but no...boring old recording onto pads

  To each their own (weirdo)...

  
• AndyPlankton

  May 2017

  @AudioGus said:

  @AndyPlankton said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AndyPlankton said:

  @RustiK said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.

  I just decided to nuke it and reinstall completely. Past few minutes work OK. Not using it in AUM yet or AB, just FD and Modstep, but like I say, so far it seems better.

  WHat the heck notes are these pads assigned to anyway, can you change them?! Should I read the manual?! Hehe. Would be nice if FD would let you save midi note configs... errr, can FD save midi note comfigs?

  in my opinion if you're pointing it at modsteps sampler. its better to let the midi come in. and drag and drop the appropraite samples as they get triggered.

  Yah it is the fills I am having trickiness with. Would like to first get them 'right' then mess around.

  Oh i see, i gettin it now... step2 load up my fav smaples. Thanks for the Modstep tip, very cool!

  It's the same workflow as ableton if you use ifunbox you can actually dump nested folders with all your samples sorted properly. Another lovely thing about modstep's sampler is you can change the pitch of the sample by semitones. Something I truly wish Bilbao had....

  Rotor does as well no?

  Egoist?

  I need to look at MODSTEPS sample situation.

  The only thing I have tinkered in it with are the MIDI out. Basically what Genome does.

  Never tried the sample use and experience with MODSTEP.

  Can you record into MODSTEP (output slot) and use that recorded audio instantly as a sample in a project?

  What options of sound standards are audio projects in Modstep? What is default anyway?

  You cannot record directly onto a pad, but you can record, then drag and drop the audio onto a pad.

  'BM3'

  (First in thread!)

  might as well talk about unicorns or leprechaun gold. I'll believe it when i see it.

  yarrr! I saw a dropbox video from 50 fathoms deep in the internet... with me own eyes I did! Pads were recorded instantly! it was like the app knew... when sound began and ended... as if it had ears of its own... yarrr...

  Sounds like ye got taken in by the call of them sirens. So many landlubbers get dragged into the deep listening to their dulcet tones. Crying shame if ye ask me

  Behold! From the Great @Samu!

  https://www.dropbox.com/s/kx2nok1jb0w50ed/ruissampler.mov?dl=0

  pretty sure you broke Samu's NDA by sharing that D=

  He already posted it on this here forum in another thread saying it won't get him booted out of the beta.

  I was expecting video of Unicorns and pots of gold, but no...boring old recording onto pads

  To each their own (weirdo)...

  

  Ahhhh That's better ! Thanks .... put me right in the mood to make some death metal that has
• Samu

  May 2017

  @gonekrazy3000 said:

  Behold! From the Great @Samu!

  https://www.dropbox.com/s/kx2nok1jb0w50ed/ruissampler.mov?dl=0

  pretty sure you broke Samu's NDA by sharing that D=

  No worries, It's been 'approved' by @mathieugarcia
  And well, there are no NDA's involved but I try to stay put out of respect.

  When I feel I can contribute in a positive way I'll do that...
• Blipsford_Baubie

  May 2017

  I took the plunge. Not surprisingly, I can't get it to trigger ruismaker in AUM. So i tried all the suggestions from earlier in the thread.
  1. In settings switched Ruismaker to GM midi.
  2. Had link disabled, force quit, reload
  3. Disabled link in aum
  4. Input in FD set to FD.

  Everytime i select aum as output in FD, it crashes. What gives?
• AudioGus

  May 2017 edited May 2017

  @Blipsford_Baubie said:
  I took the plunge. Not surprisingly, I can't get it to trigger ruismaker in AUM. So i tried all the suggestions from earlier in the thread.
  1. In settings switched Ruismaker to GM midi.
  2. Had link disabled, force quit, reload
  3. Disabled link in aum
  4. Input in FD set to FD.

  Everytime i select aum as output in FD, it crashes. What gives?

  This works for me...

  
  

  Oh and yes Ruismaker is set to General Midi here. i was wondering what these weird notes in Future Drummer were from, heh good old GM eh?

  IMG_5791.PNG 738.4K

  IMG_5790.PNG 1.8M
• gonekrazy3000

  May 2017

  Follow the settings above. and keep link enabled. I think AUM doesn't send iaa sync to FD.
• Blipsford_Baubie

  May 2017 edited May 2017

  Just as i was about to publish my post about it still not working with the above setup, something made me try again and it works even tho i did nothing seemingly different. Hopefully it'll just all open up with the aum file i saved it under and work from here on. Otherwise i guess it's one if those things that need to get done in a sequential order.

  I got seekbeats working quick but Ruismaker sounds so FRESH with FD! I just may sacrifice SB multi-outs for Ruismaker. They seem to have done a good job for giving each drum part their own space anyway. Just a little multiband work down the road should suffice. Thanks @gonekrazy3000 and @AudioGus
• lukesleepwalker

  May 2017

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AndyPlankton said:

  @RustiK said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.

  I just decided to nuke it and reinstall completely. Past few minutes work OK. Not using it in AUM yet or AB, just FD and Modstep, but like I say, so far it seems better.

  WHat the heck notes are these pads assigned to anyway, can you change them?! Should I read the manual?! Hehe. Would be nice if FD would let you save midi note configs... errr, can FD save midi note comfigs?

  in my opinion if you're pointing it at modsteps sampler. its better to let the midi come in. and drag and drop the appropraite samples as they get triggered.

  Yah it is the fills I am having trickiness with. Would like to first get them 'right' then mess around.

  Oh i see, i gettin it now... step2 load up my fav smaples. Thanks for the Modstep tip, very cool!

  It's the same workflow as ableton if you use ifunbox you can actually dump nested folders with all your samples sorted properly. Another lovely thing about modstep's sampler is you can change the pitch of the sample by semitones. Something I truly wish Bilbao had....

  Rotor does as well no?

  Egoist?

  I need to look at MODSTEPS sample situation.

  The only thing I have tinkered in it with are the MIDI out. Basically what Genome does.

  Never tried the sample use and experience with MODSTEP.

  Can you record into MODSTEP (output slot) and use that recorded audio instantly as a sample in a project?

  What options of sound standards are audio projects in Modstep? What is default anyway?

  You cannot record directly onto a pad, but you can record, then drag and drop the audio onto a pad.

  'BM3'

  (First in thread!)

  might as well talk about unicorns or leprechaun gold. I'll believe it when i see it.

  yarrr! I saw a dropbox video from 50 fathoms deep in the internet... with me own eyes I did! Pads were recorded instantly! it was like the app knew... when sound began and ended... as if it had ears of its own... yarrr...

  Sounds like ye got taken in by the call of them sirens. So many landlubbers get dragged into the deep listening to their dulcet tones. Crying shame if ye ask me

  Behold! From the Great @Samu!

  https://www.dropbox.com/s/kx2nok1jb0w50ed/ruissampler.mov?dl=0

  Yowza that's cool. Sorry, @AndyPlankton, but I think about the time saved with little things like this!
• AndyPlankton

  May 2017

  @lukesleepwalker said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AndyPlankton said:

  @RustiK said:

  @gonekrazy3000 said:

  @AudioGus said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @AudioGus said:

  @gonekrazy3000 said:

  @ExAsperis99 said:

  @gonekrazy3000 said:

  @ExAsperis99 said:
  Cognitive dissonance! I do whatever Johnny or GoneKrazy say. But they are disagreeing!

  It's a little more spendy than most drum apps. But if it has foolproof midi out? @gonekrazy3000 : You're running this into Gadget and using Recife and London. Will it work with Tokyo, which I'm realizing is my favorite drum app in iOS? Will it easily work with SeekBeats or Ruismaker or — gasp! — Impaktor?

  It will work with Tokyo and Ruismaker. You will just have to either remap the midinotes or assign the pads in Tokyo to the correct sounds. Ruismaker works fine if you enable gm midi but some thing that apple did in the move to IOS 10.3 seems to have made the Ruismaker only use the gm mapping for the first instance. I love Futuredrummer. But I get why some might be hesitant. In my case my main Use is actually to send midi to ableton drum racks. Where I have tons and tons of drum kits that I can just drag and drop exactly what sounds I want to the pads being triggered.

  The Ableton aspect seems cool, and something I think I'll gravitate toward. I'm kind of leaning toward a piece of gear — either the Push 2, iMaschine or an MPC, since it seems there's no real good option on iOS for chopping and playing samples. But that's a topic for a different thread.

  I think i just fell in love even more. never realised how amazing modsteps sampler was since i literally never used it.
  dumped a ton of awesome drum samples all nested in folders according to catergory inside modsteps folder structure using iFunbox and when creating kits it all works beautifully. creating a new kit when recieving midi from futuredrummer its as simple as dragging and dropping the audiofile i want triggered into each pad. best part is duplicating the kit 8 times with muting the sounds i want per layer and you have a 8 layer multi audio out sent to AUM for further processing.

  Modstep crashes to often for me even when I just drop their own drum sounds onto the pads. Would love to us it with Future Drummer instead of NI Battery on the laptop. Ahh well.

  It's so strange. Modstep is pretty rock solid for me. Are you using it in AUM directly ? Or are you using Audiobus in the equation ? What version of modstep are you using ? I rolled back from beta 1.2.6 to the public release due to IAA crash issues.

  I just decided to nuke it and reinstall completely. Past few minutes work OK. Not using it in AUM yet or AB, just FD and Modstep, but like I say, so far it seems better.

  WHat the heck notes are these pads assigned to anyway, can you change them?! Should I read the manual?! Hehe. Would be nice if FD would let you save midi note configs... errr, can FD save midi note comfigs?

  in my opinion if you're pointing it at modsteps sampler. its better to let the midi come in. and drag and drop the appropraite samples as they get triggered.

  Yah it is the fills I am having trickiness with. Would like to first get them 'right' then mess around.

  Oh i see, i gettin it now... step2 load up my fav smaples. Thanks for the Modstep tip, very cool!

  It's the same workflow as ableton if you use ifunbox you can actually dump nested folders with all your samples sorted properly. Another lovely thing about modstep's sampler is you can change the pitch of the sample by semitones. Something I truly wish Bilbao had....

  Rotor does as well no?

  Egoist?

  I need to look at MODSTEPS sample situation.

  The only thing I have tinkered in it with are the MIDI out. Basically what Genome does.

  Never tried the sample use and experience with MODSTEP.

  Can you record into MODSTEP (output slot) and use that recorded audio instantly as a sample in a project?

  What options of sound standards are audio projects in Modstep? What is default anyway?

  You cannot record directly onto a pad, but you can record, then drag and drop the audio onto a pad.

  'BM3'

  (First in thread!)

  might as well talk about unicorns or leprechaun gold. I'll believe it when i see it.

  yarrr! I saw a dropbox video from 50 fathoms deep in the internet... with me own eyes I did! Pads were recorded instantly! it was like the app knew... when sound began and ended... as if it had ears of its own... yarrr...

  Sounds like ye got taken in by the call of them sirens. So many landlubbers get dragged into the deep listening to their dulcet tones. Crying shame if ye ask me

  Behold! From the Great @Samu!

  https://www.dropbox.com/s/kx2nok1jb0w50ed/ruissampler.mov?dl=0

  Yowza that's cool. Sorry, @AndyPlankton, but I think about the time saved with little things like this!

  Lol, it is only boring compared to unicorns, compared to the usual record/trim/import/add to pad then of course it is cool.
• AudioGus

  May 2017 edited May 2017

  Going through old abandoned tunes and upgrading them with better Future Drummer beats has given them a whole new beginning.
• kobamoto

  May 2017

  does this app have audio export?
• JohnnyGoodyear

  May 2017

  @AudioGus said:
  Going through old abandoned tunes and upgrading them with better Future Drummer beats has given them a whole new beginning.

  Hmmm. Now there's a happy time sink to consider...