Loopy Pro: Create music, your way.

What is Loopy Pro? — Loopy Pro is a powerful, flexible, and intuitive live looper, sampler, clip launcher and DAW for iPhone and iPad. At its core, it allows you to record and layer sounds in real-time to create complex musical arrangements. But it doesn’t stop there—Loopy Pro offers advanced tools to customize your workflow, build dynamic performance setups, and create a seamless connection between instruments, effects, and external gear.

Use it for live looping, sequencing, arranging, mixing, and much more. Whether you're a live performer, a producer, or just experimenting with sound, Loopy Pro helps you take control of your creative process.

Download on the App Store

Loopy Pro is your all-in-one musical toolkit. Try it for free today.

miRack by mifki Limited - Live!!!

1…5152545657…82

Comments

  • dendydendy
    edited April 2020

    @TheOriginalPaulB said:

    @dendy said:

    @TheVimFuego said:
    It IS a bit funny that the original reason VCV didn't want to port to iOS was for performance reasons.
    To take nothing away from their achievements of which I sit, a keyboard warrioring away, in awe.

    In Slovakia there is one well known saying ... "Something is not possible just until it is made by somebody who've been not told that it is not possible". I think VCV -> miRack port is shining example of this old truth.

    Or, the silly fool didn’t know it couldn’t be done, so he went and did it anyway...

    well, yes that is more harsh variant :-))))

    @Digitalpaintfumes
    My apologies if you have been asked this already. You are beta testing Mi Rack then? Is this a public signup?

    Sorry didn't noticed your question .. i registered to beta on beginning, before first release. Not sure if it is possible now register, you should ask @mifki

  • TheOriginalPaulBTheOriginalPaulB

    @dendy said:

    @TheOriginalPaulB said:

    @dendy said:

    @TheVimFuego said:
    It IS a bit funny that the original reason VCV didn't want to port to iOS was for performance reasons.
    To take nothing away from their achievements of which I sit, a keyboard warrioring away, in awe.

    In Slovakia there is one well known saying ... "Something is not possible just until it is made by somebody who've been not told that it is not possible". I think VCV -> miRack port is shining example of this old truth.

    Or, the silly fool didn’t know it couldn’t be done, so he went and did it anyway...

    well, yes that is more harsh variant :-))))

    Lol. Tongue in cheek...

  • 0tolerance4silence0tolerance4silence

    @dendy
    How's transport/clock control in AU when using internal seqs? Any setup needed for clocks/seqs to start/stop with host?

  • TheVimFuegoTheVimFuego

    @dendy said:

    @TheVimFuego said:
    It IS a bit funny that the original reason VCV didn't want to port to iOS was for performance reasons.
    To take nothing away from their achievements of which I sit, a keyboard warrioring away, in awe.

    In Slovakia there is one well known saying ... "Something is not possible just until it is made by somebody who've been not told that it is not possible". I think VCV -> miRack port is shining example of this old truth.

    I like that!

  • dendydendy
    edited April 2020

    @0tolerance4silence said:
    @dendy
    How's transport/clock control in AU when using internal seqs? Any setup needed for clocks/seqs to start/stop with host?

    you have this module for syncing your patches with host app

    but there is comment in release notes "Please note that this module may change before the public release." so this may be not final thing...

  • 0tolerance4silence0tolerance4silence

    Cool, looks straightforward with some handy features... thx @dendy !

  • ApexApex

    Anybody else having issues with the latest version? Ever since I updated, if I open up an existing project or create a new one, when I exit back to “My Patches” it hangs for a long time then that patch is now all “white” instead showing a thumbnail of the patch? Besides that everything seems normal. I tried all the usual tricks of powering off/on and even deleting and reinstalling the app. Still happens. BTW, I did send a bug report but I’m just checking to see if its just me maybe?

    2018 iPad Pro, 12.9”
    iPadOS 13.4

    Cheers

  • jolicojolico

    Are there any EQ modules?
    Parametric/Graphic?

  • mifkimifki

    @Apex No it's not just you. Seems to be affecting iPad Pros only. I'll have a build to try soon, send me a PM if you're not a beta tester. I didn't get any reports from beta testers about this, let me know if any of you do get this issue.

  • KrupaKrupa

    @apex @mifki iPad Pro first gen, I only see that for a very brief moment while the thumbnail is generated...

  • dendydendy

    @mifki said:
    @Apex No it's not just you. Seems to be affecting iPad Pros only. I'll have a build to try soon, send me a PM if you're not a beta tester. I didn't get any reports from beta testers about this, let me know if any of you do get this issue.

    confirming, no issue at 2019 MINI model ..

  • reasOnereasOne

    @Krupa said:
    @apex @mifki iPad Pro first gen, I only see that for a very brief moment while the thumbnail is generated...

    i have the 2018 pro and same it’ll be white for a minute then switch to the image after some time but i have noticed it briefly

  • mifkimifki

    @reasOne said:

    @Krupa said:
    @apex @mifki iPad Pro first gen, I only see that for a very brief moment while the thumbnail is generated...

    i have the 2018 pro and same it’ll be white for a minute then switch to the image after some time but i have noticed it briefly

    So it doesn't hang for you when you press "My Patches"?

  • reasOnereasOne

    @mifki said:

    @reasOne said:

    @Krupa said:
    @apex @mifki iPad Pro first gen, I only see that for a very brief moment while the thumbnail is generated...

    i have the 2018 pro and same it’ll be white for a minute then switch to the image after some time but i have noticed it briefly

    So it doesn't hang for you when you press "My Patches"?

    no hang i just switched 20 patches lol stand alone mode, 10 as au

  • dougdidougdi

    iPad Pro 9.7, I haven’t had thumbnails since the first update.

  • topaztopaz

    Can MiRack be link master, ie send start/stop messages to other apps. ?

  • jolicojolico

    So, no EQs?

  • auxmuxauxmux

    Use iOS EQs, when it goes AU? Can route different instances into each other and EQ as needed.

  • desdes

    @jolico said:
    So, no EQs?

    No EQ modules by themselves, if I remember correctly.. However several of the MSC Hack mixers have eq on each channel. Each input channel is stereo and can be routed to the Main and/or Group outputs which could give you a VCA/Pan/EQ ‘module’ equivalent. If you press the Mute button on a group send, the audio can still go out the group output and not the main output as long as ‘Pre-mute’ is selected in the mixer settings.

  • stellaremodularstellaremodular

    @topaz said:
    Can MiRack be link master, ie send start/stop messages to other apps. ?

    The link module is just a peer and therefor is not able to send out tempo changes and/or start/stop messages, it can only receive those.

  • topaztopaz

    Ok cheers :-)

    @stellaremodular said:

    @topaz said:
    Can MiRack be link master, ie send start/stop messages to other apps. ?

    The link module is just a peer and therefor is not able to send out tempo changes and/or start/stop messages, it can only receive those.

  • HolonicSystemsHolonicSystems

    @stellaremodular said:

    @topaz said:
    Can MiRack be link master, ie send start/stop messages to other apps. ?

    The link module is just a peer and therefor is not able to send out tempo changes and/or start/stop messages, it can only receive those.

    Hi, I have been trying to use the Link(v2) module using AUM and a couple of miRack patches. It doesnt seem to receive anything even though Link in AUM is functioning. Are you aware?
    Mark

  • TheVimFuegoTheVimFuego

    iPad Pro 9.7 latest iOS and have no issues with the thumbnails or hanging.

  • stellaremodularstellaremodular

    @HolonicSystems said:

    @stellaremodular said:

    @topaz said:
    Can MiRack be link master, ie send start/stop messages to other apps. ?

    The link module is just a peer and therefor is not able to send out tempo changes and/or start/stop messages, it can only receive those.

    Hi, I have been trying to use the Link(v2) module using AUM and a couple of miRack patches. It doesnt seem to receive anything even though Link in AUM is functioning. Are you aware?
    Mark

    Hey Mark,

    Its working fine for me when using miRack standalone(not loading it as IAA in AUM), when I load miRack as IAA then it stops working, also got a crash like this. Perhaps @mifki knows more ;)

  • stellaremodularstellaremodular

    Actually now I tried it again, for some reason background audio was off. I turned it on and it works also when loading it as IAA inside AUM so you might wanna check if Background Audio is enabled in miRack ;)

  • stellaremodularstellaremodular

    @mifki said:

    @reasOne said:

    @Krupa said:
    @apex @mifki iPad Pro first gen, I only see that for a very brief moment while the thumbnail is generated...

    i have the 2018 pro and same it’ll be white for a minute then switch to the image after some time but i have noticed it briefly

    So it doesn't hang for you when you press "My Patches"?

    For me it also hangs on my iPad Pro 2020 and also some patches show up with white coverart.

  • HolonicSystemsHolonicSystems
    edited May 2020

    @stellaremodular said:
    Actually now I tried it again, for some reason background audio was off. I turned it on and it works also when loading it as IAA inside AUM so you might wanna check if Background Audio is enabled in miRack ;)

    I can only load one instance of miRack inside AUM as an IAA, therefore I need to load them as Audio Unit Extensions. Indeed the Link module is fine running as IAA.
    I have also noticed the background audio switching itself off along with the one-finger mode. This has been happening seemingly randomly and only occasionally for a few versions, ie before AUM support.

    atb
    Mark

    *edit to add--
    Can confirm Its absolutely fine in standalone mode.
    (cheeky request) any chance of a bpm readout being added to the module? :)

  • stellaremodularstellaremodular
    edited May 2020

    @HolonicSystems said:

    @stellaremodular said:
    Actually now I tried it again, for some reason background audio was off. I turned it on and it works also when loading it as IAA inside AUM so you might wanna check if Background Audio is enabled in miRack ;)

    I can only load one instance of miRack inside AUM as an IAA, therefore I need to load them as Audio Unit Extensions. Indeed the Link module is fine running as IAA.
    I have also noticed the background audio switching itself off along with the one-finger mode. This has been happening seemingly randomly and only occasionally for a few versions, ie before AUM support.

    atb
    Mark

    *edit to add--
    Can confirm Its absolutely fine in standalone mode.
    (cheeky request) any chance of a bpm readout being added to the module? :)

    Hey Mark,

    There should be no Link module in the AU version of miRack, it has a host sync module instead. Link module is only available in the standalone version.

    That would explain why background audio was off on my iPad, its the first thing I turn on...

    Cheers
    Sander

  • mifkimifki

    I'm investigating the issues mentioned above. Been busy lately with new document management functionality - now there will be save/save as/revert/rename that people were asking for. This is the last major thing required to be able to release the first version with AUv3. If any of you who's testing AUv3 beta noticed any issues with it, let me know now:)

  • HolonicSystemsHolonicSystems

    There should be no Link module in the AU version of miRack, it has a host sync module instead. Link module is only available in the standalone version.

    Aha, OK, understood, the host sync only puts out quarter notes though, which means another module to multiply. I'll will have to test a few, the one I am using is not very happy at multiplying a moving (heart rate) clock whereas your module in standalone has no issues.
    Thanks Sander :)

    m

Sign In or Register to comment.

© Vanilla Keystone Theme 2024