Loopy Pro: Create music, your way.

What is Loopy Pro? — Loopy Pro is a powerful, flexible, and intuitive live looper, sampler, clip launcher and DAW for iPhone and iPad. At its core, it allows you to record and layer sounds in real-time to create complex musical arrangements. But it doesn’t stop there—Loopy Pro offers advanced tools to customize your workflow, build dynamic performance setups, and create a seamless connection between instruments, effects, and external gear.

Use it for live looping, sequencing, arranging, mixing, and much more. Whether you're a live performer, a producer, or just experimenting with sound, Loopy Pro helps you take control of your creative process.

Download on the App Store

Loopy Pro is your all-in-one musical toolkit. Try it for free today.

ButterSynth Update Version 1.02

[Deleted User][Deleted User]
in General App Discussion
The user and all related content has been deleted.
«134567

Comments

  • JohansoJohanso

    Finally insta crash problem fixed. Which presets are new?

  • dendydendy

    @Johanso said:
    Finally insta crash problem fixed. Which presets are new?

    Factory > Butter

  • SuperNiCdSuperNiCd

    Hooray! Looking forward to giving this another go!

  • richardyotrichardyot
    edited September 2023

    @dendy said:

    @Johanso said:
    Finally insta crash problem fixed. Which presets are new?

    Factory > Butter

    LOL, when I first read this post my brain interpreted it as Sugar Bytes Factory is better than Butter Synth 😆

    (Context matters, right?)

  • GrandbearGrandbear

    Can anyone help me out with the right modulation matrix entry so that velocity does not affect volume? I could never get it working with negative modulation, which was an earlier suggestion

  • dendydendy

    @richardyot said:

    @dendy said:

    @Johanso said:
    Finally insta crash problem fixed. Which presets are new?

    Factory > Butter

    LOL, when I first read this post my brain interpreted it as Sugar Bytes Factory is better than Butter Synth 😆

    (Context matters, right?)

    😂😂

  • dendydendy

    @Grandbear said:
    Can anyone help me out with the right modulation matrix entry so that velocity does not affect volume? I could never get it working with negative modulation, which was an earlier suggestion

    one of things i requested long time ago (ability to detach velocity from volume). It’s hard coded now.. will remember this to Arto, it’s for sure somewhwre in long todo list but i think this should be prioritised

  • GrandbearGrandbear

    @dendy said:

    @Grandbear said:
    Can anyone help me out with the right modulation matrix entry so that velocity does not affect volume? I could never get it working with negative modulation, which was an earlier suggestion

    one of things i requested long time ago (ability to detach velocity from volume). It’s hard coded now.. will remember this to Arto, it’s for sure somewhwre in long todo list but i think this should be prioritised

    :) thanks! But do you know if it's actually possible to counteract the hardcoded mapping with negative modulation?

  • dendydendy

    @Grandbear said:

    @dendy said:

    @Grandbear said:
    Can anyone help me out with the right modulation matrix entry so that velocity does not affect volume? I could never get it working with negative modulation, which was an earlier suggestion

    one of things i requested long time ago (ability to detach velocity from volume). It’s hard coded now.. will remember this to Arto, it’s for sure somewhwre in long todo list but i think this should be prioritised

    :) thanks! But do you know if it's actually possible to counteract the hardcoded mapping with negative modulation?

    i think no, i tried it but it was not working as expected

  • SandstormSandstorm

    Still no sustain pedal implementation. That's a shame!

  • GrandbearGrandbear

    @dendy said:

    @Grandbear said:

    @dendy said:

    @Grandbear said:
    Can anyone help me out with the right modulation matrix entry so that velocity does not affect volume? I could never get it working with negative modulation, which was an earlier suggestion

    one of things i requested long time ago (ability to detach velocity from volume). It’s hard coded now.. will remember this to Arto, it’s for sure somewhwre in long todo list but i think this should be prioritised

    :) thanks! But do you know if it's actually possible to counteract the hardcoded mapping with negative modulation?

    i think no, i tried it but it was not working as expected

    got it, thanks again for confirming

  • sigma79sigma79

    Mix and match.

    Would mean 5 wavetable and fm etc.

    I dont think you can switch synth engines?

  • craftycuratecraftycurate

    @dendy said:

    @Johanso said:
    Finally insta crash problem fixed. Which presets are new?

    Factory > Butter

    That folder was present before the update, unless some new presets have been placed in that folder?

  • gregsmithgregsmith

    You should find this version works great in Logic Pro now. I’ve been using this beta for a while and it’s stopped crashing for me entirely.

  • dendydendy

    @craftycurate said:

    @dendy said:

    @Johanso said:
    Finally insta crash problem fixed. Which presets are new?

    Factory > Butter

    That folder was present before the update, unless some new presets have been placed in that folder?

    yes, lot of new presets

  • dendydendy

    @sigma79 said:
    Mix and match.

    Would mean 5 wavetable and fm etc.

    I dont think you can switch synth engines?

    for now 5 synth engines are fixed (2 wt, 1 fm, 1 sample player, 1 granular)

  • craftycuratecraftycurate

    @dendy said:

    @craftycurate said:

    @dendy said:

    @Johanso said:
    Finally insta crash problem fixed. Which presets are new?

    Factory > Butter

    That folder was present before the update, unless some new presets have been placed in that folder?

    yes, lot of new presets

    Ooh nice - will check it out!

  • sigma79sigma79

    @dendy said:

    @sigma79 said:
    Mix and match.

    Would mean 5 wavetable and fm etc.

    I dont think you can switch synth engines?

    for now 5 synth engines are fixed (2 wt, 1 fm, 1 sample player, 1 granular)

    Cool tho.

    Mix and match by definition is true. If to mix and match sound

    but at a store. If there were 6 products. With mix and match. You could only buy the same 6 products advertised. So need not advertise.

  • LuxthorLuxthor

    Finally working fine in Logic Pro, also multiple instances in AUM too.
    Drambo inside AUM can record properly without ButterSynth lag. 🤩

  • HotStrangeHotStrange

    Oh it’s out, nice! The beta as been working very well for me for the last few days.

  • sigma79sigma79
    edited September 2023

    The update has made wavetable 2 not work correctly again.

    Nothing passed the 1st wavetable updates soundwise.

  • PxlhgPxlhg
    edited September 2023

    @Sandstorm said:
    Still no sustain pedal implementation. That's a shame!

    That's strange; it was added in the beta many version ago and works fine on my setup (M-Audio Oxy.Pro w M-Audio's own pedal). Anyone else having this issue?

    Edit: What do you use? iPad kind, iOS version, Hardware ...?

  • PxlhgPxlhg

    @sigma79 said:
    The update has made wavetable 2 not work correctly again.

    Nothing passed the 1st wavetable updates soundwise.

    Also weird as it works in beta, both standalone and auv3. What do you use? iDevice kind, iOS version?

  • dendydendy

    @sigma79 said:
    The update has made wavetable 2 not work correctly again.

    Nothing passed the 1st wavetable updates soundwise.

    thanks, reported to Arto

  • dendydendy

    @Pxlhg said:
    Also weird as it works in beta, both standalone and auv3. What do you use? iDevice kind, iOS version?

    Nope, it does not .. it's just that wen you are in WT2 always first frame plays, even throgu you switch to other one ..

  • PxlhgPxlhg

    @dendy said:

    @Pxlhg said:
    Also weird as it works in beta, both standalone and auv3. What do you use? iDevice kind, iOS version?

    Nope, it does not .. it's just that wen you are in WT2 always first frame plays, even throgu you switch to other one ..

    Right. I missed tht.

  • rvrrvr

    Has jittery knobs when modulation is applied to them. Feels wobbly all in all, sometimes save button doesnt work, very strange accelerated feel to knobs like in Gadget which I totally dont like. Great synth but probably going to refund. Still thinking.

  • rapidfirerapidfire
    edited September 2023

    Annoying v1.02 update Bug
    Hi,
    Has anyone else encountered this problem with the latest v1.02 update, I use BS AUv3 in Cubasis 3, every time I launch Cubasis the selected preset in BS is always different! I have rebooted my iPad Air 4 iOS16.6.1 but my selected preset still changes to one I have not selected. I have turned on the LOAD LAST PRESET SAVED but this makes no difference. If I have two instances of BS open in Cubasis both with different presets, then close and relaunch Cubasis, both instances of BS have the same preset?
    Any help would be much appreciated 🙂

  • espiegel123espiegel123

    @Sandstorm said:
    Still no sustain pedal implementation. That's a shame!

    Works fine for me.

    Can you give specifics or a demonstration of it not working. If I play a note on my midi keyboard and press down on my sustain pedal, release the keyboard note, the note sustains until I release the sustain pedal.

  • dendydendy
    edited September 2023

    @rapidfire said:
    Annoying v1.02 update Bug
    Hi,
    Has anyone else encountered this problem with the latest v1.02 update, I use BS AUv3 in Cubasis 3, every time I launch Cubasis the selected preset in BS is always different! I have rebooted my iPad Air 4 iOS16.6.1 but my selected preset still changes to one I have not selected. I have turned on the LOAD LAST PRESET SAVED but this makes no difference. If I have two instances of BS open in Cubasis both with different presets, then close and relaunch Cubasis, both instances of BS have the same preset?
    Any help would be much appreciated 🙂

    just tried it - no problem here.. created new oroject, loaded 2 instances if BS. changed preset in each ine, closed cubasis, reopemed cubasis, reloaded recent project - both instances correct preset

    latest ios, latest cubasis, latest bs

Sign In or Register to comment.

© Vanilla Keystone Theme 2024