Loopy Pro: Create music, your way.

What is Loopy Pro? — Loopy Pro is a powerful, flexible, and intuitive live looper, sampler, clip launcher and DAW for iPhone and iPad. At its core, it allows you to record and layer sounds in real-time to create complex musical arrangements. But it doesn’t stop there—Loopy Pro offers advanced tools to customize your workflow, build dynamic performance setups, and create a seamless connection between instruments, effects, and external gear.

Use it for live looping, sequencing, arranging, mixing, and much more. Whether you're a live performer, a producer, or just experimenting with sound, Loopy Pro helps you take control of your creative process.

Download on the App Store

Loopy Pro is your all-in-one musical toolkit. Try it for free today.

miRack by mifki Limited - Live!!!

1…3435373940…82

Comments

  • palmspalms

    @rs2000 said:

    @palms said:

    @wim said:
    There’s even an Impulse Response loader. B)

    I'm very excited for that one. I'm getting nothing but glitched verbs from it though. changing the block size just changes the rate of the glitches. Might be because I'm using an older ipad, but it says it's using 1% cpu. anyone else running into problems with the NYSTHI Convolvzilla?

    Could be lack of CPU power or, maybe, a convolution algorithm that needs optimization.
    Have you tried different combinations of block size and miRack audio buffer settings?
    I had crackle fest on a rather fast iPad 2018 too, until I reduced (!) miRack's audio buffer from 1024 to 512 samples. Now it works with all block sizes, using short IRs.

    hmm thanks for the tip, but it still does it at 512, no matter the block size.

  • rs2000rs2000

    @palms said:

    @rs2000 said:

    @palms said:

    @wim said:
    There’s even an Impulse Response loader. B)

    I'm very excited for that one. I'm getting nothing but glitched verbs from it though. changing the block size just changes the rate of the glitches. Might be because I'm using an older ipad, but it says it's using 1% cpu. anyone else running into problems with the NYSTHI Convolvzilla?

    Could be lack of CPU power or, maybe, a convolution algorithm that needs optimization.
    Have you tried different combinations of block size and miRack audio buffer settings?
    I had crackle fest on a rather fast iPad 2018 too, until I reduced (!) miRack's audio buffer from 1024 to 512 samples. Now it works with all block sizes, using short IRs.

    hmm thanks for the tip, but it still does it at 512, no matter the block size.

    OK, what model is your iPad? Tried a reboot already?
    It runs fine with IR "Batcave" at block size 256 and miRack audio buffer 256 on an older iPad Mini 2. Tried with a simple snare drum module.

  • mifkimifki

    It seems to have problems if Convolzilla buffer is smaller than miRack buffer. Can you try adjusting both so that the module buffer is the same or bigger than miRack audio buffer?

  • [Deleted User][Deleted User]
    edited November 2019

    @mifki said:
    It seems to have problems if Convolzilla buffer is smaller than miRack buffer. Can you try adjusting both so that the module buffer is the same or bigger than miRack audio buffer?

    is there a list for modules which use separate audio buffers? might be handy to mark/tag these ones somehow? i assume you can't program mirack to auto adjust the module buffer size to mirack?

  • [Deleted User][Deleted User]
    edited November 2019

    duplicate

  • rs2000rs2000
    edited November 2019

    @mifki said:
    It seems to have problems if Convolzilla buffer is smaller than miRack buffer.

    Confirmed on both iDevices, iOS 12.3.1.

  • rs2000rs2000

    @mifki another minor issue: Nysthi "BIGBUTTON" will take fast consecutive taps as double-tap and trigger only once instead of twice.
    Hitting at two different positions in fast succession on the same pad works, that's how I found out.

  • mifkimifki

    @[Deleted User] said:

    @mifki said:
    It seems to have problems if Convolzilla buffer is smaller than miRack buffer. Can you try adjusting both so that the module buffer is the same or bigger than miRack audio buffer?

    is there a list for modules which use separate audio buffers? might be handy to mark these ones somehow? i assume you can't program mirack to auto adjust the module buffer size to mirack?

    They normally don't. But as I mentioned, there's a few unusual techniques employed in NYSTHI, but as it's closed-source, I don't know what exactly is the problem in each case and where else it might be. Actually, we noticed and disabled some options already, once we have a list what else can be improved, I'll pass it on to Antonio.

  • [Deleted User][Deleted User]

    @mifki said:

    @[Deleted User] said:

    @mifki said:
    It seems to have problems if Convolzilla buffer is smaller than miRack buffer. Can you try adjusting both so that the module buffer is the same or bigger than miRack audio buffer?

    is there a list for modules which use separate audio buffers? might be handy to mark these ones somehow? i assume you can't program mirack to auto adjust the module buffer size to mirack?

    They normally don't. But as I mentioned, there's a few unusual techniques employed in NYSTHI, but as it's closed-source, I don't know what exactly is the problem in each case and where else it might be. Actually, we noticed and disabled some options already, once we have a list what else can be improved, I'll pass it on to Antonio.

    coolio

  • JumpercollinsJumpercollins

    Are there any modules yet that change pitch of a sound?

  • SynthiSynthi

    Crackle fest in nysthi using jira jira echo, no matter what miRack buffer I use. Is a patch that goes at about 20%. Lastest beta, iOS 12.4 iPad Pro 10,5 2017.
    Changing the device to nysthi NYechoecho working fine with no crackles.

    ITOH, could be posible to get more cable colours?

    Thanks @mifki for the excelent work!!!

  • rs2000rs2000

    @Jumpercollins said:
    Are there any modules yet that change pitch of a sound?

    I've not seen any but you can emulate old-school pitched-tiny-slices-crossfading using the Nysthi modules.

  • palmspalms

    @mifki said:
    It seems to have problems if Convolzilla buffer is smaller than miRack buffer. Can you try adjusting both so that the module buffer is the same or bigger than miRack audio buffer?

    yes, I've tried all configurations. Just made a quick screengrab for you to see. Fresh restart on ipad, nothing else running in the background:

  • frondfrond

    @Jumpercollins said:
    Are there any modules yet that change pitch of a sound?

    Yes. Pitch shifter. Under ‘tags’ > ‘effect’ > STKPitchShifter - NYSTHI

  • rs2000rs2000

    @frond said:

    @Jumpercollins said:
    Are there any modules yet that change pitch of a sound?

    Yes. Pitch shifter. Under ‘tags’ > ‘effect’ > STKPitchShifter - NYSTHI

    Wow. These NYSTHI modules are simply fantastic.

  • topaztopaz

    Sitting here dreaming of a desktop vst/au version !

  • wimwim
    edited November 2019

    @topaz said:
    Sitting here dreaming of a desktop vst/au version !

    https://vcvrack.com/
    https://vcvrack.com/Host.html
    https://bedroomproducersblog.com/2018/07/08/vcv-rack-vst-port-unofficial/
    https://bedroomproducersblog.com/2018/03/31/vcv-rack-bridge/

  • mifkimifki

    Working on a new fullscreen module browser

  • rs2000rs2000
    edited November 2019

    @mifki said:
    Working on a new fullscreen module browser

    Aaaah what a relief to see this.
    Will zooming be supported in the browser modules view?

  • JumpercollinsJumpercollins

    @mifki said:
    Working on a new fullscreen module browser

    Nice

  • EschatoneEschatone

    Those new Geodesic modules are a work of art - gotta be one of the most interesting UI designs I’ve seen.
    Reminds me of the eclectic Folktek stuff , at least in form.

    Quite a lot for a modular noob like myself to get my head around,
    but Omri Cohen’s tutorial series is an excellent jump start:

  • EschatoneEschatone

    @mifki said:
    Working on a new fullscreen module browser

    Awesome! Any plans for a text search function? That would be a tremendous help. It can get a bit tedious to scroll through such a large and growing module library.

  • rs2000rs2000

    @Eschatone said:

    @mifki said:
    Working on a new fullscreen module browser

    Awesome! Any plans for a text search function? That would be a tremendous help. It can get a bit tedious to scroll through such a large and growing module library.

    A combined text- and tag-based search would be cool. Selectable tags that are ANDed.

  • DCJDCJ

    @Eschatone said:
    Those new Geodesic modules are a work of art - gotta be one of the most interesting UI designs I’ve seen.
    Reminds me of the eclectic Folktek stuff , at least in form.

    Quite a lot for a modular noob like myself to get my head around,
    but Omri Cohen’s tutorial series is an excellent jump start:

    Ah thank you for this! Now I can finally learn how black hole works. That’s the only one that’s eluded me so far!

  • palmspalms

    @mifki
    I'm getting consistent crashes when attempting to add a scala tuning to the NYSTHI scala quantizer. This is one of my most cherished modules, I'll be so stoked to get this working in mirack!

  • mifkimifki

    @palms said:
    @mifki
    I'm getting consistent crashes when attempting to add a scala tuning to the NYSTHI scala quantizer. This is one of my most cherished modules, I'll be so stoked to get this working in mirack!

    You mean add a custom one from a file?

  • palmspalms

    @mifki said:

    @palms said:
    @mifki
    I'm getting consistent crashes when attempting to add a scala tuning to the NYSTHI scala quantizer. This is one of my most cherished modules, I'll be so stoked to get this working in mirack!

    You mean add a custom one from a file?

    yes. a custom scala tuning file.

  • ipadmusicipadmusic

    @mifki I know it was discussed here before... but can you please add more inputs/outputs for audio modules (I have ES-8 module that has 4 ins + 8 outs and it would be amazing if we'll be able to use all the ins/outs of external audio interfaces) Thank you!

  • palmspalms

    @ipadmusic said:
    @mifki I know it was discussed here before... but can you please add more inputs/outputs for audio modules (I have ES-8 module that has 4 ins + 8 outs and it would be amazing if we'll be able to use all the ins/outs of external audio interfaces) Thank you!

    agreed. I'm eyeing that ES-9 and to be able to route things around would be amazing.

  • SynthiSynthi

    @rs2000 said:

    @mifki said:
    Working on a new fullscreen module browser

    Will zooming be supported in the browser modules view?

    Please!!!!

Sign In or Register to comment.

© Vanilla Keystone Theme 2024